Snow carrots after the Chelyabinsk event and model implications for highly porous solar system objects

After the catastrophic disruption of the Chelyabinsk meteoroid, small fragments formed funnels in the snow layer covering the ground. We constrain the pre‐impact characteristics of the fragments by simulating their atmospheric descent with the atmospheric entry model. Fragments resulting from catastrophic breakup may lose about 90% of their initial mass due to ablation and reach the snow vertically with a free‐fall velocity in the range of 30–90 m s^?1. The fall time of the fragments is much longer than their cooling time, and, as a consequence, fragments have the same temperature as the lower atmosphere, i.e., of about ?20 °C. Then, we use the shock physics code iSALE to model the penetration of fragments into fluffy snow, the formation of a funnel and a zone of denser snow lining its walls. We examine the influence of several material parameters of snow and present our best‐fit model by comparing funnel depth and funnel wall characteristics with observations. In addition, we suggest a viscous flow approximation to estimate funnel depth dependence on the meteorite mass. We discuss temperature gradient metamorphism as a possible mechanism which allows to fill the funnels with denser snow and to form the observed “snow carrots.” This natural experiment also helps us to calibrate the iSALE code for simulating impacts into highly porous matter in the solar system including tracks in the aerogel catchers of the Stardust mission and possible impact craters on the 67P/Churyumov‐Gerasimenko comet observed recently by the Rosetta mission.     

Shock Wave Effects from the Impacts of Cosmic Objects with Diameters from 20 m to 3 km

Izvestiya, Physics of the Solid Earth - Abstract—Destruction on the Earth’s surface caused by a shock wave is one of the most important and dangerous effects from asteroid and comet...     

Antipodal effects of lunar basin-forming impacts: Initial 3D simulations and comparisons with observations

3D simulations of basin-scale lunar impacts are carried out to investigate: (a) the origins of strong crustal magnetic fields and unusual terrain observed to occur in regions antipodal to young large basins; and (b) the origin of enhanced magnetic and geochemical anomalies along the northwest periphery of the South Pole-Aitken (SPA) basin. The simulations demonstrate that a basin-forming impact produces a massive, hot, partially ionized cloud of vapor and melt that expands thermally around the Moon, converging near the basin antipode approximately 1 h after the impact for typical impact parameters. In agreement with previous work, analytic calculations of the interaction of this vapor-melt cloud with an initial ambient magnetic field predict a substantial temporary increase in field intensity in the antipodal region. The time of maximum field amplification coincides with a period when impacting ejecta also converge near the antipode. The latter produce antipodal shock stresses within the range of 5-25 GPa where stable shock remanent magnetization (SRM) of lunar soils has been found experimentally to occur. Calculated antipodal ejecta thicknesses are only marginally sufficient to explain the amplitudes of observed magnetic anomalies if mean magnetization intensities are comparable to those produced experimentally. This suggests that pre-existing ejecta materials, which would also contain abundant metallic iron remanence carriers, may be important anomaly sources, a possibility that is consistent with enhanced magnetic anomalies observed peripheral to SPA. The latter anomalies may be produced by amplified secondary ejecta impact shock waves in the thick SPA ejecta mantle occurring near the antipodes of the Imbrium and Serenitatis impacts. Together with converging seismic compressional waves, these antipodal impact shocks may have produced especially deep fracture zones along the northwest edge of SPA near the Imbrium antipode, allowing the ascent of magma with enhanced KREEP concentrations.     

Ries crater and suevite revisited—Observations and modeling Part I: Observations

We report results of an interdisciplinary project devoted to the 26 km‐diameter Ries crater and to the genesis of suevite. Recent laboratory analyses of “crater suevite” occurring within the central crater basin and of “outer suevite” on top of the continuous ejecta blanket, as well as data accumulated during the past 50 years, are interpreted within the boundary conditions imposed by a comprehensive new effort to model the crater formation and its ejecta deposits by computer code calculations (Artemieva et al. 2013). The properties of suevite are considered on all scales from megascopic to submicroscopic in the context of its geological setting. In a new approach, we reconstruct the minimum/maximum volumes of all allochthonous impact formations (108/116 km³), of suevite (14/22 km³), and the total volume of impact melt (4.9/8.0 km³) produced by the Ries impact event prior to erosion. These volumes are reasonably compatible with corresponding values obtained by numerical modeling. Taking all data on modal composition, texture, chemistry, and shock metamorphism of suevite, and the results of modeling into account, we arrive at a new empirical model implying five main consecutive phases of crater formation and ejecta emplacement. Numerical modeling indicates that only a very small fraction of suevite can be derived from the “primary ejecta plume,” which is possibly represented by the fine‐grained basal layer of outer suevite. The main mass of suevite was deposited from a “secondary plume” induced by an explosive reaction (“fuel‐coolant interaction”) of impact melt with water and volatile‐rich sedimentary rocks within a clast‐laden temporary melt pool. Both melt pool and plume appear to be heterogeneous in space and time. Outer suevite appears to be derived from an early formed, melt‐rich and clast‐poor plume region rich in strongly shocked components (melt ? clasts) and originating from an upper, more marginal zone of the melt pool. Crater suevite is obviously deposited from later formed, clast‐rich and melt‐poor plumes dominated by unshocked and weakly shocked clasts and derived from a deeper, central zone of the melt pool. Genetically, we distinguish between “primary suevite” which includes dike suevite, the lower sublayer of crater suevite, and possibly a basal layer of outer suevite, and “secondary suevite” represented by the massive upper sublayer of crater suevite and the main mass of outer suevite.     

Deep Norden： Highlights of the lithospheric structure of Northern Europe, Iceland, and Greenland

We present a review of geophysical models of the continental lithosphere of Norden, which includes the Nordic countries （Denmark, Iceland, Finland, Norway, Sweden）, Greenland, and the adjacent regions of the neighbouring countries. The structure of the crust and the lithospheric mantle reflects the geologic evolution of Norden from Precambrian terrane accretion and subduction within the Baltic Shield and Greenland to Phanerozoic rifting, volcanism, magmatic crust formation, subduction and continent-continent collision at the edges of the cratons and at the plate boundaries. The proposed existence of a mantle plume below Iceland has not been uniquely demonstrated by the available seismic evidence. Its connection to the break-up of the North Atlantic Ocean c. 65 My ago is uncertain, but the 〉30 km thick crust in the strait between Iceland and Greenland may indicate the track of the plume. Using the results from seismic （reflection and refraction profiles, P- and S-wave, body-wave and surface-wave tomography）, thermal, gravity, and petrologic studies,we review the structure of the crust and the lithospheric mantle of Norden and propose an integrated model of physical properties of the lithosphere of the region, including maps of lateral variation in crustal and lithospheric thicknesses and compositional variation in the lithospheric mantle.     

Evidence that Lake Cheko is not an impact crater

In a provocative paper Gasperini et al. (2007) suggest that Lake Cheko, a ～300‐m‐wide lake situated a few kilometres downrange from the assumed epicentre of the 1908 Tunguska event, is an impact crater. In this response, we present several lines of observational evidence that contradicts the impact hypothesis for the lake’s origin: un‐crater‐like aspects of the lake morphology, the lack of impactor material in and around the lake, and the presence of apparently unaffected mature trees close to the lake. We also show that a tensile strength of 10–40 MPa is required for an asteroid fragment to traverse the Earth’s atmosphere and reach the surface intact and with sufficient velocity to excavate a crater the size of Lake Cheko. Inferred tensile strengths of large stony meteorites during atmospheric disruption are 10–100 times lower. We therefore conclude that Lake Cheko is highly unlikely to be an impact crater.     

Ejection of Martian meteorites

Abstract— We investigated the transfer of meteorites from Mars to Earth with a combined mineralogical and numerical approach. We used quantitative shock pressure barometry and thermodynamic calculations of post‐shock temperatures to constrain the pressure/temperature conditions for the ejection of Martian meteorites. The results show that shock pressures allowing the ejection of Martian meteorites range from 5 to 55 GPa, with corresponding post‐shock temperature elevations of 10 to about 1000 °C. With respect to shock pressures and post‐shock temperatures, an ejection of potentially viable organisms in Martian surface rocks seems possible. A calculation of the cooling time in space for the most highly shocked Martian meteorite Allan Hills (ALH) 77005 was performed and yielded a best‐fit for a post‐shock temperature of 1000 °C and a meteoroid size of 0.4 to 0.6 m. The final burial depths of the sub‐volcanic to volcanic Martian rocks as indicated by textures and mineral compositions of meteorites are in good agreement with the postulated size of the potential source region for Martian meteorites during the impact of a small projectile (200 m), as defined by numerical modeling (Artemieva and Ivanov 2004). A comparison of shock pressures and ejection and terrestrial ages indicates that, on average, highly shocked fragments reach Earth‐crossing orbits faster than weakly shocked fragments. If climatic changes on Mars have a significant influence on the atmospheric pressure, they could account for the increase of recorded ejection events of Martian meteorites in the last 5 Ma.