Self-consistent response of a galactic disc to vertical perturbations

We study the self-consistent, linear response of a galactic disc to vertical perturbations, as induced, say, by a tidal interaction. We calculate the self-gravitational potential corresponding to a non-axisymmetric, self-consistent density response of the disc using the Green's function method. The response potential is shown to oppose the perturbation potential because the self-gravity of the disc resists the imposed potential, and this resistance is stronger in the inner parts of a galactic disc. For the   m = 1  azimuthal wavenumber, the disc response opposes the imposed perturbation up to a radius that spans a range of 4–6 disc scalelengths, so that the disc shows a net warp only beyond this region. This physically explains the well known but so far unexplained observation that warps typically set in beyond this range of radii. We show that the inclusion of a dark matter halo in the calculation only marginally changes (by ∼10 per cent) the radius for the onset of warps. For perturbations with higher azimuthal wavenumbers, the net signature of the vertical perturbations can only be seen at larger radii – for example, beyond 7 exponential disc scalelengths for   m = 10  . Also, for the high- m cases, the magnitude of the negative disc response due to the disc self-gravity is much smaller. This is shown to result in corrugations of the mid-plane density, which explains the puzzling scalloping with   m = 10  detected in H  i in the outermost regions ∼30 kpc in the Galaxy.     

Determination of specific yield using a water balance approach – case study of Torla Odha watershed in the Deccan Trap province, Maharastra State, India

Specific yield is an essential parameter for any groundwater management plan. Volumetric analysis in the domain of groundwater budgeting for the non-monsoon months has been undertaken for a typical watershed of the Deccan basalt province. The Torla Odha watershed covers an area of over 22 km² on a third-order tributary of the westerly flowing Bhima River. The watershed receives a normal annual rainfall of 643 mm. The entire water demand is supplied by dug wells, which penetrate a shallow aquifer. The specific yield was estimated by comparing the monthly net volume of water removed from the aquifer, with the volume of aquifer de-saturated, based on monthly water level data. The estimated specific yield ranges from 0.0019 in May to 0.0173 in November with an average value of 0.0093. A correlation of the groundwater levels with the detailed geology suggests that the higher specific yield value (0.017) corresponds to dewatering of the weathered zone within the shallow aquifer. The specific yield of the massive basalt immediately below the weathered zone varies from 0.0089 to 0.0103. The underlying vesicular basalt, which is dissected by sheet joints, has a relatively higher specific yield (0.0121). The massive basalt, which forms the base of the shallow aquifer system, has a lower specific yield from 0.0019 to 0.0022.

---

Résumé Le débit spécifique est un paramètre essentiel pour tout plan de gestion des eaux souterraines. Les analyses volumétriques, dans le cadre des bilans hydriques des eaux en dehors des mois de mousson, ont été entreprises pour un bassin-versant typique de la province basaltique du Deccan. Le bassin-versant du Torla Odha couvre une superficie de 22 km², et alimente l’affluent du troisième ordre de la rivière Bhima, qui coule vers l’Ouest. La pluviométrie annuelle atteint 643 mm. Toute la demande en eau es assurée par des puits foncés pénétrant dans l’aquifère phréatique. Le débit spécifique a été estimé en comparant le volume net mensuel d’eau captée dans l’aquifère, avec le volume de l’aquifère dé-saturé, basé sur les données des niveaux piézométriques mensuels. Le débit spécifique estimé s’étend entre 0,0019 en Mai et 0.173 en Novembre; la moyenne se situe à 0,0093. Une corrélation entre les niveaux des eaux souterraines et la géologie, suggère que les débits spécifiques les plus importants (0,017) correspondent aux zones altérées de l’aquifère phréatique. Le débit spécifique du massif basaltique, immédiatement sous la zone altérée, varie entre 0,0089 et 0,0103. Le basalte vésiculaire, situé juste en dessous et traversé par des diaclases parallèles, possède un débit spécifique sensiblement plus élevé (0,0121). Le basalte massif, qui forme la base de l’aquifère phréatique, possède un débit spécifique moins important, compris entre 0,0019 et 0,0022.

---

Resumen El rendimiento específico es un parámetro esencial para cualquier plan de manejo de aguas subterráneas. Se ha llevado a cabo el análisis volumétrico, en el entorno de balance de aguas subterráneas, para los meses sin monzón de una cuenca típica de la provincia de basaltos Deccan. La cuenca Rorla Odha cubre un área de 22 km² en un tributario de tercer orden del Río Bhima que fluye al oeste. La cuenca capta una lluvia anual normal de 643 mm. La totalidad de la demanda de agua es abastecida por pozos manuales que penetran un acuífero somero. Se estimó el rendimiento específico al comparar el volumen neto mensual de agua removido del acuífero con el volumen de agua de-saturado estimado a partir de datos de niveles de agua mensuales. Los valores estimados de rendimiento específico varían de 0.0019 en mayo a 0.0173 en noviembre con un valor promedio de 0.0093. La correlación de niveles de agua subterránea con la geología de detalle sugieren que el valor más alto (0.017) de rendimiento específico corresponden con el desaguado de la zona de intemperismo dentro del acuífero somero. El rendimiento específico del basalto masivo que se encuentra inmediatamente debajo de la zona de intemperismo varía de 0.0089 a 0.0103. El basalto vesicular subyacente, el cual está disectado por fracturas laminares, tiene un rendimiento específico relativamente más alto (0.0121). El basalto masivo, que forma la base del sistema de acuífero somero, tiene un rendimiento específico más bajo el cual varía de 0.0019 a 0.0022. Palabras clave: basalto Deccan. India. Rendimiento específico. Recarga de agua subterránea. Balance hídrico.

     

Geochemistry of Early Cretaceous Alkaline Ultramafic-Mafic Complex from Jasra, Karbi Anglong, Shillong Plateau, Northeastern India

An early Cretaceous alkaline ultramafic-mafic complex is emplaced within the Proterozoic rocks of Shillong plateau at Jasra, Karbi Anglong district of Assam. It is associated to the fracture system of Barapani-Tyrsad shear zone, Kopali faults, and Um Ngot lineaments and mainly comprises pyroxenite, gabbro and nepheline syenite. Few small mafic dykes, emplaced within pyroxenitic and granitic plutons, are also reported. No such dyke is reported to cut gabbros or nepheline syenites. Nepheline syenites occur either in the form of small dykes in pyroxenites or as differentiated bodies in the gabbros. Mineralogical and chemical composition of pyroxenite and gabbro clearly indicate their affinity to the alkaline magmatism. Syenitic samples show miaskitic character (agpaitic index <1), also indicates affinity with alkaline-carbonatite magmatism. Calcite is encountered in a number of pyroxenite samples. From the presented petrological and geochemical data it is difficult to establish any significant genetic relationship through simple differentiation process between these rocks. These data probably suggest that these rocks are derived from a primary carbonatite magma, generated by the low-degree melting of a metasomatized mantle peridotite. CO₂ released by this process also progressively metasomatizes the lherzolite to an alkaline wehrlite and melts derived from alkaline wehrlite (ultrabasic alkaline silicate magma) may be responsible for crystallization of Jasra alkaline ultramafic-mafic rocks.     

Developing synergy regression models with space-borne ALOS PALSAR and Landsat TM sensors for retrieving tropical forest biomass

Forest stand biomass serves as an effective indicator for monitoring REDD (reducing emissions from deforestation and forest degradation). Optical remote sensing data have been widely used to derive forest biophysical parameters inspite of their poor sensitivity towards the forest properties. Microwave remote sensing provides a better alternative owing to its inherent ability to penetrate the forest vegetation. This study aims at developing optimal regression models for retrieving forest above-ground bole biomass (AGBB) utilising optical data from Landsat TM and microwave data from L-band of ALOS PALSAR data over Indian subcontinental tropical deciduous mixed forests located in Munger (Bihar, India). Spatial biomass models were developed. The results using Landsat TM showed poor correlation (R² = 0.295 and RMSE = 35 t/ha) when compared to HH polarized L-band SAR (R² = 0.868 and RMSE = 16.06 t/ha). However, the prediction model performed even better when both the optical and SAR were used simultaneously (R² = 0.892 and RMSE = 14.08 t/ha). The addition of TM metrics has positively contributed in improving PALSAR estimates of forest biomass. Hence, the study recommends the combined use of both optical and SAR sensors for better assessment of stand biomass with significant contribution towards operational forestry.     

Monitoring of water stress in wheat using multispectral indices derived from Landsat-TM

Detection of crop water stress is crucial for efficient irrigation water management. Potential of Satellite data to provide spatial and temporal dynamics of crop growth conditions makes it possible to monitor crop water stress at regional level. This study was conducted in parts of western Uttar Pradesh and Haryana. Multi-temporal Landsat data were used for detecting wheat crop water stress using vegetation indices (VIs), viz. vegetation water stress index (VWSI) and land surface wetness index water stress factor (Ws_LSWI). The estimated water stress from satellite data-based VIs was validated by water stress factor (Ws) derived from flux-tower data. The study observed Ws_LSWI to be better index for water stress detection. The results indicated that Ws_LSWI was superior over other index showing RMSE = 0.12, R² = 0.65, whereas VWSI showed overestimated values with mean RD 4%.     

Deformation behavior of migmatites: insights from microstructural analysis of a garnet–sillimanite–mullite–quartz–feldspar-bearing anatectic migmatite at Rampura–Agucha,Aravalli–Delhi Fold Belt,NW India

International Journal of Earth Sciences - In the present study we investigate the microstructural development in mullite, quartz and garnet in an anatectic migmatite hosted within a Grenvillian-age...     

Interactive effect of cadmium and zinc on chromium uptake in spinach grown in Vertisol of Central India

A pot culture experiment was conducted to study impact and interaction of multi-metals on growth, yield and metals uptake by spinach (variety All Green). Three levels of each chromium (0, 50 and 100 mg/kg), cadmium (0, 1 and 2 mg/kg) and zinc (0, 10 and 20 mg/kg) in combinations (total treatments 3 × 3 × 3 = 27) were applied in a Vertisol (5 kg). The results showed that increasing the concentration of chromium, cadmium and zinc in soil enhanced the respective metal concentrations in spinach root and shoot. When cadmium at 2 mg/kg along with chromium at 100 mg/kg soil was applied, chromium concentration and uptake were decreased in root and shoot. Meanwhile, zinc application had no significant effect on chromium uptake and concentration in spinach biomass. From the results, it was concluded that cadmium at higher dose had an antagonistic effect over chromium. On the other hand, in chromium, cadmium and zinc combinations particularly at their higher levels, a competition among each other was found. Therefore, the findings could be used as guidelines for controlling and management of heavy metals pollution in farmland.     

Swelter in the city: Urban greenery and its effects on temperature in Guwahati,India

Changing urban landscape with multistoried high rises, roads and pavements is continuously reducing urban green space. These structures result in high surface temperature variation within cities. To explore the relationship between surface temperature and normalized difference vegetation index (NDVI), this study estimates two models—geographically weighted regression (GWR) and a fixed effect panel data model in relation to the Guwahati Metropolitan Area (GMA), a secondary city in north east India. The results indicate the superiority of GWR regression in presence of spatial dependence. Panel data analysis shows that the densely populated urban areas in the GMA with less than 10 per cent greenery are 1°C warmer than the sub-urban areas with 50 per cent greenery.     

Decumbent development: Urban sprawl in the Guwahati Metropolitan Area,India

Urban sprawl has become a global phenomenon as an outcome of growing population and rapid urbanization. Previous studies have addressed the rising incidence of uncontrollable urban development, particularly in peri-urban areas of cities, leading to chronic urban sprawl. The city of Guwahati, a million city in north east India, has expanded significantly in recent years. In this article, the links between population and growth of built-up areas were examined using geo-spatial techniques and remotely sensed datasets. The results indicate that the sprawl has accentuated in recent years. The intensity of land use remained uneven due to marked variations in the distribution of built-up areas, plausibly an outcome of unplanned urban growth. If current trends are anything to go by, future urban sprawl could pose serious threats to the vulnerable eco-sensitive and peri-urban areas of Guwahati. Secondary cities have unfortunately received scant attention in urban policy research, and Guwahati, epitomizes urban woes in a developing country.