Assessing the effects of land cover and future climate conditions on the provision of hydrological services in a medium‐sized watershed of Portugal

The separated and combined effects of land‐cover scenarios and future climate on the provision of hydrological services were evaluated in Vez watershed, northern Portugal. Soil and Water Assessment Tool was calibrated against daily discharge, sediments and nitrates, with good agreements between model predictions and field observations. Four hypothetical land‐cover scenarios were applied under current climate conditions (eucalyptus/pine, oak, agriculture/vine and low vegetation). A statistical downscaling of four General Circulation Models, bias‐corrected with ground observations, was carried out for 2021–2040 and 2041–2060, using representative concentration pathway 4.5 scenario. Also, the combined effects of future climate conditions were evaluated under eucalyptus/pine and agriculture/vine scenario. Results for land cover revealed that eucalyptus/pine scenario reduced by 7% the annual water quantity and up to 17% in the summer period. Although climate change has only a modest effect on the reduction of the total annual discharge (?7%), the effect on the water levels during summer was more pronounced, between ?15% and ?38%. This study shows that climate change can affect the provision of hydrological services by reducing dry season flows and by increasing flood risks during the wet months. Regarding the combined effects, future climate may reduce the low flows, which can be aggravated with eucalyptus/pine scenario. In turn, peak flows and soil erosion can be offset. Future climate may increase soil erosion and nitrate concentration, which can be aggravated with agriculture scenario. Results moreover emphasize the need to consider both climate and land‐cover impacts in adaptation and land management options at the watershed scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Performance of masonry enclosure walls: lessons learned from recent earthquakes

This paper discusses the issue of performance requirements and construction criteria for masonry enclosure and infill walls.Vertical building enclosures in European countries are very often constituted by non-load-bearing masonry walls, using horizontally perforated clay bricks.These walls are generally supported and confined by a reinforced concrete frame structure of columns and beams/slabs.Since these walls are commonly considered to be nonstructural elements and their influence on the structural response is ignored,their consideration in the design of structures as well as their connection to the adjacent structural elements is frequently negligent or insufficiently detailed.As a consequence,nonstructural elements,as for wall enclosures,are relatively sensitive to drift and acceleration demands when buildings are subjected to seismic actions. Many international standards and technical documents stress the need for design acceptability criteria for nonstructural elements,however they do not specifically indicate how to prevent collapse and severe cracking,and how to enhance the overall stability in the case of moderate to high seismic loading.Furthermore,a review of appropriate measures to improve enclosure wall performance and both in-plane and out-of-plane integrity under seismic actions is addressed.     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.     

Mechanical Behavior of Microbially Induced Calcite Precipitation Cemented Sand

Geotechnical and Geological Engineering - New sustainable ground improvement techniques have been recently required for applications in onshore and offshore geotechnical structures. The...     

Geotechnical Characterization by In situ and Lab Tests to the Back-Analysis of a Supported Excavation in Metro do Porto

This paper summarizes the geotechnical characterization conducted for the design and subsequent analysis of a strutted excavation in “Metro do Porto”. This region is geologically dominated by heterogeneous weathered granite masses with deep residual soil profiles. Local saprolitic soils exhibit, by their nature, a particular behavior characterized by very sensitive and weak relic micro-structures, due to their specific genesis. This study has included the interpretation of a significant volume of in situ test results, triaxial tests over undisturbed samples and monitoring data, giving rise to specific correlations between testing and design parameters. Real time monitoring enabled a back-analysis by FEM of a well instrumented section of the strutted excavation, which was calibrated taking into account the derived correlations and the deformability behavior of this specific geotechnical ambient. This geomaterial, although revealing very high initial stiffness values (for very small strain ranges) has shown low stiffness values for “medium to high” strain levels, reflecting a singular strong non-linearity in the stress-strain behavior.     

Influence of Particle Morphology on the Hydraulic Behavior of Coal Ash and Sand

Flexible-wall hydraulic conductivity tests were carried out on bottom ash, fly ash and compacted specimens of sand with additions of 0, 3, 6, 9 and 18% of bentonite. In order to study the effect of bentonite inclusion and particle morphology on the hydraulic conductivity of the admixtures, an investigation was undertaken based on thin section micrographs. It was found that, for both bottom and fly ash admixtures, bentonite addition reduced only one order of magnitude the hydraulic conductivity, from 1.78 × 10⁻⁶ m/s to 1.39 × 10⁻⁷ m/s. On the other hand, the sand hydraulic conductivity was reduced five orders of magnitude, from 3.17 × 10⁻⁵ m/s to 5.15 × 10⁻¹⁰ m/s. Among several factors that can be responsible for the difficulty in reducing hydraulic conductivity, such as ash grain size distribution and elevated cation concentration (leached from the ash) in pore water, it can also be recalled the high particle voids observed in the ash by means of microscopic analysis. The same is not true with the sand, which has solid particles, without inner voids.     

Talc mineralisation associated with soft hematite ore, Gongo Soco deposit, Minas Gerais, Brazil: petrography, mineral chemistry and boron-isotope composition of tourmaline

Talc mineralisation occurs as hematite–talc schist between soft hematite ore and dolomitic itabirite at Gongo Soco, Quadrilátero Ferrífero of Minas Gerais, Brazil. The hematite–talc schist and soft hematite have a prominent tectonic foliation of tabular hematite. Tabular hematite without preferential orientation is superimposed on the tectonic foliation. The talcose schist is enriched in F and has a constant Fe/S ratio. Electron-microprobe analyses indicate trace amounts of S in different generations of hematite. The whole-rock Fe/S ratio possibly represents sulfate S from hematite-hosted fluid inclusions. Fluid inclusions in foliation-overprinting hematite and chlorite geothermometry from talcose rocks suggest, respectively, temperatures from <200°C to ~300°C. Tourmaline, a rarely observed mineral in the hematite–talc schist, belongs to the alkali group and falls in the dravite compositional field. Boron-isotope determinations of tourmaline crystals, using secondary ion mass spectrometry, vary from −20‰ to −12‰ δ¹¹B. This compositional isotopic range and the tourmaline chemical composition suggest a meta-evaporitic origin. A non-marine evaporitic setting is the most likely source of acidic, highly oxidising fluids, which resulted in the abundant F-bearing talc and the presence of otherwise immobile Ti in hematite. Oxidising brines were channelled along shear zones and converted dolomitic itabirite into the Gongo Soco soft hematite and the talc mineralisation. The latter is envisaged as the hydrothermal wall-rock alteration of dolomitic itabirite, which gave rise to the soft hematite ore.     

Experimental testing, numerical modelling and seismic strengthening of traditional stone masonry: comprehensive study of a real Azorian pier

Stone masonry is one of the oldest building techniques used worldwide and it is known to exhibit poor behaviour under seismic excitations. In this context, this work aims at assessing the in-plane behaviour of an existing double-leaf stone masonry pier by experimental testing. Additionally, a detailed 3D finite element numerical analysis based on micro-modelling of the original pier is presented (fully describing the geometry and division of each individual elements, namely infill, blocks and joints) aiming at simulating the experimental test results. This numerical strategy can be seen as an alternative way of analysing this type of constructions, particularly useful for laboratory studies, and suitable for the calibration of simplified numerical models. As part of a wider research activity, this work is further complemented with the presentation of an effective retrofit/strengthening technique (reinforced connected plaster) to achieve a significant improvement of its in-plane cyclic response which is experimentally verified in the results presented herein.