Natural background levels and threshold values of monitored parameters in the Cambrian-Vendian groundwater body,Estonia

The Cambrian-Vendian groundwater body plays an important role in drinking water supply of capital Tallinn and other settlements in northern Estonia. Water quality in this deep-seated confined groundwater body is influenced by the intrusion of present-day seawater and pumping-induced upward migration of deeper saline groundwater. The aim of this study is to evaluate the threshold values applying the methodology worked out within the EU 6th FP project “Background criteria for the identification of groundwater thresholds (BRIDGE)” and to compare the results with the values proposed by local authorities. A database containing 250 monitoring points was completed and used for the calculation of natural background levels (as the 90 and 97.7 percentile) in groundwater. The calculation of threshold values is based on natural background levels and reference values. In case of Cambrian-Vendian groundwater body the receptor is drinking water, thus limit values set by Estonian drinking water standard were used as reference values. The threshold values proposed by local authorities are more or less the same as calculated by BRIDGE methodology. Exceptionally different values are derived in case of chloride and ammonium.     

Physical model experiments for sediment supply to the old Rhine through induced bank erosion

A mobile-bed, undistorted physical model （1：40） has been used to investigate different sediment supply strategies to the Old Rhine through bank protection removal and modifications of groyne dimensions and configuration, which cause bank erosion. This trained channel was previously the main bed of the upper Rhine downstream of Basel （Switzerland）, but it has an artificially low flow regime since the construction of the Grand Canal d＇Alsace, a navigation canal, and a flow control dam at Kembs （France）. Training works and subsequent channel incision have also greatly reduced sediment transport rates and created a heavily armoured bed. The modelled pilot site has a groyne field on the left bank. Results show that the currently existing groynes at the site are not effective in creating high bank-side velocities conducive to bank erosion, even for flow rates significantly higher than the mean annual flow rate. The river bank has also proved to be more resistant than previously thought, allowing long stretches of bank protection to be safely removed. The physical model testing process has produced a new configuration for the groyne field, where two higher, larger island groynes are placed further apart than the three existing attached groynes. This innovative approach has proved effective, causing bank erosion for flow rates below the mean annual flow rate, with consistent erosion being observed. It has also been found that such a configuration does not pose a hazard for the Grand Canal d＇Alsace, which is situated next to the Old Rhine, through excessive bank erosion during high flow events.     

Crustal Structure of Turkey from Aeromagnetic, Gravity and Deep Seismic Reflection Data

In this paper, aeromagnetic and gravity anomalies obtained from the General Directorate of Mineral Research and Exploration were subjected to upward continuation to 3?km from the ground surface to suppress shallow effects and to expose only regional, deep sources. Then, a reduction to pole (RTP) map of aeromagnetic anomalies was produced from the 3?km upward continued data. A sinuous boundary to the south of Turkey is observed in the RTP map that may indicate the suture zone between the Anatolides and African/Arabian Plates in the closure time of the Tethys Ocean. The sinuous boundary can be correlated with the recent palaeo-tectonic maps. The southern part of the sinuous boundary is quite different and less magnetic in comparison with the northern block. In addition, maxspots maps of the aeromagnetic and gravity anomalies were produced to find out and enhance the boundaries of tectonic units. Crustal thickness, recently calculated and mapped for the western Turkey, is also extended to the whole of Turkey, and the crustal thicknesses are correlated with the previous seismological findings and deep seismic sections. The average crustal thickness calculations using the gravity data are about 28?km along the coastal regions and increase up to 42?km through the Iranian border in the east of Turkey. Density and susceptibility values used as parameters for construction of two-dimensional (2D) gravity and magnetic models were compiled in a table from different localities of Turkey. 2D models indicate that all of the anomalous masses are located in the upper crust, and this could be well correlated with the earthquakes which occurred at shallow depths.     

The May 2005 eruption of Fernandina volcano,Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45–60°) toward the caldera at the surface and more gently dipping (~12–14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another.     

Ultrashallow seismic experiment on a trenched section of the Chelunpu fault zone, Taiwan

Ultrashallow P-wave seismic reflection experiments were conducted at a model test site and in a trenched shallow fault zone along the Chelunpu fault line. The field layout was designed to have the shallowest undistorted reflection from about 1 m depth with 0.5 m vertical resolution. The smallest group interval tested in this study was 0.05 m with a 0.25 ms sample interval, which can avoid spatial aliasing of ground roll if the target is very shallow and the velocities are low. Data processing was designed to be simple but consistent. As the ultrashallow reflections may be contaminated with high-amplitude coherent noise in many aspects, first break muting and surgical muting were performed on each file as detailed as possible, and f–k filtering was applied mainly for the purpose of attenuating the aliasing energy and back-scattered noise. Data acquired in this study show that the low P-wave velocities (< 200 m/s) and high dominant frequencies (120–200 Hz) of near-surface layers may have a potential vertical resolution of 0.4 m or even better.Comparing the test profile with the ground-penetrating radar (GPR) control profile of the same test site and correlating the results obtained from the study site with those of the geologic cross-section of the trench, this experiment demonstrates the possibility of using seismic methods in investigating shallow structures at depths of less than a few meters with vertical resolution comparable to the GPR technique.     

A summary of sulfur dioxide emission rate measuremnts from Guatemalan volcanoes

Measurements of the sulfur dioxide (SO₂) emission rate from three Guatemalan volcanoes provide data which are consistent with theoretical and laboratory studies of eruptive and shallow magma chamber processes. In particular, unerupted magma makes a major contribution to the measured SO₂ emission rates at Santiaguito, a continuously erupting dacitic volcanic dome. Varying shallow magma convection rates can explain the variations in SO₂ emission rates at Santiaguito. At Fuego, a basaltic volcano currently in repose, SO₂ emission rate measurements are consistent with a high level magma body that is crystallizing and releasing volatiles. At Pacaya, a continuously erupting basaltic volcano, recent SO₂ emission rate measurements support laboratory simulation studies of strombolian eruptions; these studies indicate that the majority of gas escapes during eruptions and little gas escapes between eruptions.Average SO₂ emission rates over the last 20 years for Santiaguito, Fuego and Pacaya are 80, 160 and 260 Mg/d, respectively. On a global scale, these three volcanoes account for 1% of the annual global volcanic output of SO₂. Santiaguito and Pacaya, together, emit 6% of the total annual SO₂ emitted by continuously erupting volcanoes.Even though SO₂ measurements at these volcanoes have been made infrequently and by different investigators, the collective data help to establish a useful baseline by which to judge future changes. A more complete record of SO₂ emission rates from these volcanoes could lead to a better understanding of their eruption mechanisms and reduce the impact of their future eruptions on Guatemalan society.     

Reflections on the history of research on large wood in rivers

Dynamics and functions of large wood have become integral considerations in the science and management of river systems. Study of large wood in rivers took place as monitoring of fish response to wooden structures placed in rivers in the central United States in the early 20th century, but did not begin in earnest until the 1970s. Research has increased in intensity and thematic scope ever since. A wide range of factors has prompted these research efforts, including basic understanding of stream systems, protection and restoration of aquatic ecosystems, and environmental hazards in mountain environments. Research and management have adopted perspectives from ecology, geomorphology, and engineering, using observational, experimental, and modelling approaches. Important advances have been made where practical information needs converge with institutional and science leadership capacities to undertake multi-pronged research programmes. Case studies include ecosystem research to inform regulations for forest management; storage and transport of large wood as a component in global carbon dynamics; and the role of wood transport in environmental hazards in mountain regions, including areas affected by severe landscape disturbances, such as volcanic eruptions. As the field of research has advanced, influences of large wood on river structures and processes have been merged with understanding of streamflow and sediment regimes, so river form and function are now viewed as involving the tripartite system of water, sediment, and wood. A growing community of researchers and river managers is extending understanding of large wood in rivers to climatic, forest, landform, and social contexts not previously investigated. © 2020 John Wiley & Sons, Ltd.     

A comparison of total precipitation values estimated from measurements and a 1D cloud model

The purpose of this study is to establish a relation between observed total precipitation values and estimations from a one-dimensional diagnostic cloud model. Total precipitation values estimated from maximum liquid water content, maximum vertical velocity, cloud top height, and temperature excess are also used to provide an equation for the total precipitation prediction. Data for this study were collected in Istanbul during the autumns of 1987 and 1988. The statistical models are developed with multiple regression technique and then comparatively verified with independent data for 1990. The multiple regression coefficients are in the range of 75% to 80% in the statistical models. Results of the test showed that total precipitation values estimated from the above techniques are in good agreement, with correlation coefficient between 40% and 46% based on test data for 1990.     

Eocene tonalite–granodiorite from the Havza (Samsun) area,northern Turkey: adakite-like melts of lithospheric mantle and crust generated in a post-collisional setting

ABSTRACT

Eocene intermediate to felsic plutons of different sizes and compositions are widespread in the Eastern Pontides Orogenic Belt in northern Turkey. Of these, the Ta?l?k Tepe pluton in the Havza (Samsun) area is fine-to-medium-grained, with granular, porphyritic, and micrographic textures, and include mafic microgranular enclaves (MMEs). LA-ICP-MS U-Pb zircon dating yielded emplacement ages of 42.9 (± 1.4) and 40.5 (± 1.3) Ma for the host granodioritic pluton and the dioritic MMEs, respectively. Petrochemically, the host pluton has I-type, high-K calc-alkaline, and metaluminous-to-slightly peraluminous features (A/CNK = 0.95–1.06). The host pluton also shows geochemical features of adakite-like rocks with high SiO₂ (67–68 wt%) and Al₂O₃ (15.5–16.0 wt%) content and Ba/La (17–23), Sr/Y (40.7–61.6), and La_N/Yb_N (14.4–23.7) ratios and low Y (8.2–9.9 ppm) and Yb_N (3.1–4.4) contents. Whole-rock major and trace element variations suggest that fractional crystallisation played a significant role in the pluton evolution. The N-MORB normalised trace element patterns of the pluton are similar to those of MMEs with enrichment in large-ion lithophile elements, Th and Ce, and negative Nb and Ti anomalies. Chondrite-normalised rare earth element plots show moderate-to-highly enriched concave patterns (La_N/Lu_N = 14.2–21.6) with insignificant negative Eu anomalies (Eu_N/Eu* = 0.86–1.14), all of which imply hornblende fractionation during magmatic evolution. The pluton samples have ⁸⁷Sr/⁸⁶Sr ratios of 0.704767 to 0.704927, ¹⁴³Nd/¹⁴⁴Nd ratios of 0.512767–0.512774, εNd values of (+2.52) – (+2.65), and δ¹⁸O values of 7.9–9.7‰. The isotopic compositions of the host pluton and MMEs are similar to I-type granitoids derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. Combined with regional studies, these new data suggest that the parental magma of the studied adakite-like pluton was generated from the lithospheric mantle and then modified by fractional crystallisation and assimilation in a post-collisional setting.