A conduit-related genesis of the Lengshuiqing intrusive assemblage (Sichuan,SW China)

Lengshuiqing is part of the late Proterozoic igneous province from the western margin of the Yangtze craton. The Lengshuiqing area comprises five ultramafic–mafic intrusions, emplaced in the late Proterozoic Yanbian Group. The intrusions from Lengshuiqing contain cumulate ultramafic zones (peridotite + olivine pyroxenite), with cumulus olivine and Cr-spinel, and intercumulus pyroxenes, hornblende, phlogopite and plagioclase. Ni–Cu ore (pyrrhotite + pentlandite + chalcopyrite) is hosted in the ultramafic zones. Olivine-free diorite–quartz diorite ± gabbro and granite zones commonly occur above the ultramafic rocks. The genesis of the intrusions (conduit-related accumulation or differentiation from stagnant magma) was investigated. The amount of sulphides in the intrusions from Lengshuiqing is one order of magnitude bigger than the sulphides that can be dissolved by a volume of mafic magma similar with the volume of the intrusions. Most intrusions from Lengshuiqing have bulk composition (peridotite ± diorite ± granite) more magnesian (MgO = 21–22%; Mg# > 78) than the deduced composition of their parental magma (MgO = 9–11%; Mg# = 64–67). This indicates the accumulation of sulphide and mafic silicates from a volume of magma much bigger than the volume of the intrusions, which can be explained by the fractionation from magma ascending through the intrusions to shallower depths. A continuous supply and vent of magma is consistent with the lack of chilled margins, the melting of the wall rocks and the generation of high-temperature mineral assemblages (K-feldspar, diopside, and sillimanite) in the Yanbian Group. The intrusions from Lengshuiqing are seen as microchambers on conduits draining olivine-, Cr-spinel-, and sulphide-bearing mafic magma from a larger staging chamber.     

Contributions to the spectral theory of seismic sources and determination of the parameters of earthquake foci

A spectral theory of seismic sources is developed which treats earthquake foci as band-pass filters. This concept is applied to focal mechanisms of the type double-couple with moment, and the obtained spectral function of the source is compared with those obtained by other authors. Finally some formulae for the determination of geometric and dynamic source parameters from the bandpass parameters are presented.     

Retrieval of the boundary layer height from active and passive remote sensors. Comparison with a NWP model

In this study, we used boundary layer heights derived from lidar in Romania to validate the Weather Research Forecast (WRF) model improved by ARIA Technologies SA in the framework of ROMAIR LIFE project. Lidar retrievals were also compared to the retrievals from meteorological data, both modeled (Global Data Assimilation System; GDAS) and measured (microwave radiometry). Both the gradient and the wavelet covariance methods were used to compute the boundary layer height (BLH) from the range corrected lidar signal, and their equivalence was shown. The analysis was performed on 102 datasets, spread over all seasons and 3 years (2009–2011). A good agreement was found for the remote sensors (lidar and microwave radiometer) which are co-located and measure simultaneously. The correlation of the measured boundary layer height and the modelled one was 0.66 for the entire dataset, and 0.73 when considering daytime data, i.e., for a well defined boundary layer. A systematic underestimation of the boundary layer height by the WRF during non-convective periods (nocturne, stable atmosphere) was found.     

The dynamics of the snow avalanche affected areas in Piatra Mica mountains (Romania)

This article is intended to explain the snow avalanche occurrence, as a natural phenomenon directly influenced by the local natural conditions, for the well-delimited area represented by the Piatra Mica massif, belonging to the Piatra Craiului mountain range (southern Carpathians). In this respect, depending on the factors that may trigger or encourage the avalanches, some vulnerable areas with avalanche occurring conditions have been identified, based on the analysis of the relationships among the factors controlling the avalanche vulnerability in the study area. These factors are mainly represented by the slope aspect, which induces from the very beginning some specific features for each type of slope (north-, east-, south and west-facing slopes), the geological structure, slope gradient and topography. At the same time, the general climatic and biological features have been taken into account, from the point of view of their importance for avalanche occurrence and distribution. Depending on the microrelief exhibited by the avalanche chutes, one can establish distinct dynamical features for each of the four major slopes of the massif. It is worth mentioning that for this study area, this is the first paper dealing with avalanche phenomenon, vulnerable space, control factors and landscape dynamics. In accomplishing this demarche, we used detailed mappings in the field in several stages, the processing of satellite images, analytical (declivities, the exposure of slopes, etc.) and synthetic maps from which the dynamic of sectors with avalanches resulted. The findings of this investigation may further be employed for solving the problems raised by avalanche-prone areas, as well as for devising a better strategy for the effective management of the mountain realm.     

Non-parametric Bayesian networks for parameter estimation in reservoir simulation: a graphical take on the ensemble Kalman filter (part I)

Reservoir simulation models are used both in the development of new fields and in developed fields where production forecasts are needed for investment decisions. When simulating a reservoir, one must account for the physical and chemical processes taking place in the subsurface. Rock and fluid properties are crucial when describing the flow in porous media. In this paper, the authors are concerned with estimating the permeability field of a reservoir. The problem of estimating model parameters such as permeability is often referred to as a history-matching problem in reservoir engineering. Currently, one of the most widely used methodologies which address the history-matching problem is the ensemble Kalman filter (EnKF). EnKF is a Monte Carlo implementation of the Bayesian update problem. Nevertheless, the EnKF methodology has certain limitations that encourage the search for an alternative method.For this reason, a new approach based on graphical models is proposed and studied. In particular, the graphical model chosen for this purpose is a dynamic non-parametric Bayesian network (NPBN). This is the first attempt to approach a history-matching problem in reservoir simulation using a NPBN-based method. A two-phase, two-dimensional flow model was implemented for a synthetic reservoir simulation exercise, and initial results are shown. The methods’ performances are evaluated and compared. This paper features a completely novel approach to history matching and constitutes only the first part (part I) of a more detailed investigation. For these reasons (novelty and incompleteness), many questions are left open and a number of recommendations are formulated, to be investigated in part II of the same paper.     

Effects of seed particle size and composition on heterogeneous nucleation of n-nonane

Heterogeneous nucleation of supersaturated n-nonane vapour on seed particles of different size and composition has been investigated using a fast expansion chamber. Monodisperse seed particle sizes were ranging from about 4 nm up to about 24 nm in diameter. By using different types of particle generators WO_x, Ag and (NH₄)₂SO₄ particles were generated. For direct comparison between different particle compositions overlapping sizes have been generated for WO_x and Ag at about 7 nm particle diameter as well as for Ag and (NH₄)₂SO₄ at about 15 nm. Nucleation temperature was kept constant at about 278 K. Experimental data were compared to Kelvin equation and Fletcher theory including the effect of line tension. It was found that heterogeneous nucleation of n-nonane seems to be independent of seed particle composition and starts well below the Kelvin curve. Good agreement was achieved with Fletcher theory including the effect of line tension.     

Provenance of Oligocene lithic and quartz arenites of the East Carpathians: Understanding sediment routing systems on compressional basin margins

We present new sedimentological, petrographical, palaeontological and detrital zircon U–Pb data on late Oligocene–early Miocene sedimentary rocks of the thin-skinned thrust belt of East Carpathians. These data were acquired to reconstruct the sedimentary routing system for two compositionally different turbidite fans made of the regionally extensive Kliwa and Fusaru formations. On the eastern margin of the Moldavides foreland basin, large low-gradient river systems draining the East European Platform provided well-sorted quartz-rich sand forming deltas on wide shallow shelves and thick Kliwa submarine fans. Due to the westward subduction of a thinned continental plate, the western basin margin was characterized by short, steep-gradient routing systems where sediment transport to deep water was mainly through hyperpycnal flows. The Getic and Bucovinian nappes of the East Carpathians and the exhumed Cretaceous–Early Palaeogene orogenic wedge fed Fusaru fans with poorly sorted lithic sand. The Fusaru fans trend northwards in the foredeep basin having an elongate depocentre, interfingering and then overlapping on the distal part of the Kliwa depositional system due to the eastward advance of the Carpathian fold-and-thrust belt. A smaller sediment input is supplied by southern continental areas (i.e. Moesian Platform, North Dobrogea and potentially the Balkans). In general, the sandstone interfingering between distinct basin floor fan systems is less well documented because the facies would be similar and there are not many systems that have a distinct sediment provenance like Kliwa and Fusaru systems. This case study improves the understanding of regional palaeogeography and sedimentary routing systems and provides observations relevant here or elsewhere on the interfingering turbidite fan systems.     

Sequence of magma emplacement and sulfide saturation in the Gaojiacun–Lengshuiqing intrusive complex (SW China)

The Lengshuiqing area contains several small intrusions made up of peridotite ± quartz diorite ± granite spatially associated with the Gaojiacun pluton (gabbroids + peridotite + diorite). Ni–Cu sulfide ore occur at Lengshuiqing, hosted in peridotite. SHRIMP U–Pb zircon dating produced the ages of 803 ± 4.2 Ma (peridotite), 807 ± 2.6 Ma (oikocrystic hornblende gabbro), 809 ± 4.3 Ma (hornblende gabbronorites) for the Gaojiacun pluton and 807 ± 3.8 Ma (diorite, intrusion I), 817 ± 6.3 Ma (quartz diorite, intrusion II) and 817 ± 5 Ma (peridotite, intrusion 101) for Lengshuiqing. These ages suggest the emplacement of the Gaojiacun pluton later than the intrusions from Lengshuiqing. The olivine from Lengshuiqing does not contain sulfide inclusions and is relatively Ni-rich (1,150–1,550 ppm Ni), suggesting its crystallisation before the sulfide saturation that generated the Ni–Cu deposits. The olivine of the gabbros in the Gaojiacun pluton is Ni-poor (250–800 ppm), which indicates crystallisation from a severely metal-depleted magma after a sulfide saturation event. The olivine in the peridotites from the Gaojiacun pluton has 800–1,150 ppm Ni and contains sulfide inclusions. Moreover, geological evidence suggests the genesis of the peridotites from Gaojiacun in conduits that were ascending through the gabbroids. A sequence of at least three stages of magma emplacement is proposed: (1) Lengshuiqing; (2) gabbroids from Gaojiacun; (3) peridotites from Gaojiacun. Given the age differences, the intrusions at Lengshuiqing and the Gaojiacun pluton might have been produced by different magmatic events.     

Effects of large sea‐level variations in connected basins: the Dacian–Black Sea system of the Eastern Paratethys

Sea‐level changes provide an important control on the interplay between accommodation space and sediment supply, in particular, for shallow‐water basins where the available space is limited. Sediment exchange between connected basins separated by a subaqueous sill (bathymetric threshold) is still not well understood. When sea‐level falls below the bathymetric level of this separating sill, the shallow‐water basin evolution is controlled by its erosion and rapid fill. Once this marginal basin is filled, the sedimentary depocenter shifts to the open marine basin (outward shift). With new accommodation space created during the subsequent sea‐level rise, sediment depocenter shifts backwards to the marginal basin (inward shift). This new conceptual model is tested here in the context of Late Miocene to Quaternary evolution of the open connection between Dacian and Black Sea basins. By the means of seismic sequence stratigraphic analysis of the Miocene‐Pliocene evolution of this Eastern Paratethys domain, this case study demonstrates these shifts in sedimentary depocenter between basins. An outward shift occurs with a delay that corresponds to the time required to fill the remaining accommodation space in the Dacian Basin below the sill that separates it from the Black Sea. This study provides novel insight on the amplitude and sedimentary geometry of the Messinian Salinity Crisis (MSC) event in the Black Sea. A large (1.3–1.7 km) sea‐level drop is demonstrated by quantifying coeval sedimentation patterns that change to mass‐flows and turbiditic deposits in the deep‐sea part of this main sink. The post‐MSC sediment routing continued into the present‐day pattern of Black Sea rivers discharge.