Collisional disruption experiments of porous targets

More and more small bodies are found to be porous. Laboratory impact experiments of various porous materials have been performed, which increased our understanding of the impact process of porous bodies. In this review, we classify porous targets according to the internal structure, describe the physical properties that characterize these materials, and summarize some results of impact strength and the general tendency upon impact condition and material properties. The material property presented here includes a relation between applied load and distension although measured in static condition. Further investigation is required to clarify the role of crack growth and compaction in the time evolution of physical properties of porous materials upon impact. Laboratory experiments with detailed material properties will be useful as a database that can serve as a reference for numerical modeling and theoretical scaling considerations.     

Direct PCR amplification of the 16S rRNA gene from single microbial cells isolated from an Antarctic iceberg using laser microdissection microscopy

Here, we describe a technique that allows the genetic linage analysis of 16S rRNA genes in bacteria observed under a microscope. The technique includes the isolation of microbial cells using a laser microdissection microscope, lysis of the cells, and amplification of the 16S rRNA genes in the isolated cells without interference by bacterial DNA contamination from the experimental environment or reagents. Using this technique, we successfully determined 15 16S rRNA gene sequences in cells isolated from an Antarctic iceberg. These sequences showed 94%–100% identity to their closest strains, which included bacteria that occur in aqueous, marine, and soil environments.     

Efficient analysis of pile-group effect on seismic stiffness and strength design of buildings

A new efficient method is developed for the analysis of pile-group effects on the seismic stiffness and strength design of buildings with pile foundations. An efficient continuum model consisting of a dynamic Winkler-type soil element and a pile is used to express the dynamic behavior of the structure-pile-soil system with only a small numerical error. The pile-group effect is taken into account through the influence coefficients among piles which are defined for interstory drifts and pile-head bending moments. It is shown that, while the pile-group effect reduces the interstory drift of buildings in general, it may increase the bending moment of piles at the head. This means that the treatment without the pile-group effect results in the conservative design for super-structures and requires a revised member design for piles.     

Velocity of finer fragments from impact

We describe the method and the result of a new experiment to obtain velocity distribution of fine ejecta fragments, from a few to a hundred microns in size, produced from basalt targets by impacts of nylon projectiles at a velocity of 3.7 km s⁻¹. The size distribution of holes perforated by the ejecta fragments on thin films and foils placed around the targets was investigated, and the size-velocity relation was determined with the aid of an empirical formula for threshold penetration (McDonnell and Sullivan, Hypervelocity Impacts in Space, Unit for Space Sciences, University of Kent, 1992). The velocity of the fastest fragments, at a given size, is from the extrapolation of the size-velocity relation for 1–100 mm fragments (Nakamura and Fujiwara, Icarus92, 132–146, 1991; Nakamura et al, Icarus100, 127–135, 1992). The laboratory results are also compared with those obtained from the study of secondary craters around large lunar craters (Vickery, Icarus67, 224–236, 1986, Geophys. Res. Lett. 14, 726–729, 1987). All these data provide a smooth size-velocity relationship in the normalized fragment size range of four orders of magnitude.     

A survey of possible impact structures on 25143 Itokawa

We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.     

Impact of mercury emissions from incineration of automobile shredder residue in Japan

Mercury emissions from the incineration of automobile shredder residues (ASRs) were investigated. Continuous monitoring of elemental and reactive gaseous Hg in flue gas was performed in lab-scale and plant-scale ASR incineration. Results of continuous monitoring agreed with those obtained using the JIS K0222 method and Ontario-Hydro method. Before cleaning by air pollutant control devices (APCDs), reactive Hg was the dominant form of that element in both lab-scale and plant-scale results. Emission factors of reactive Hg before APCDs estimated from monitoring results showed large differences between plant-scale and lab-scale emissions. The emission factor in the plant scale was more than 10 times larger than that in the lab-scale, which is explainable by the different Hg contents of ASR. Based on plant-scale monitoring at the stack, emission factors after APCDs were estimated as 0.79 mg-Hg/Mg-ASR for elemental Hg and 6.8 mg-Hg/Mg-ASR for reactive Hg. Using these emission factors, total Hg emissions from ASR incineration were estimated as 2.2 kg/a. An ASR incineration plant investigated in this study used highly effective APCDs. Consequently, these emission factors might result in underestimation of national Hg emissions from ASR incineration. Emission factors estimated from lab-scale monitoring at a fabric filter outlet side might be more appropriate. However, even if emission factors calculated from plant-scale or the lab-scale monitoring are used, estimated emissions are still less than 1.0% of total Hg emissions in Japan. Therefore, Hg emissions from ASR incineration can be evaluated as insignificant. Unless Hg contents of ASR increase extremely, ASR incineration would be a minor source of Hg atmospheric emission in Japan, even if all ASRs were incinerated.     

Scale mismatches and their ecological and economic effects on landscapes: A spatially explicit model

Mismatches between the spatial scales of human decision-making and natural processes contribute to environmental problems such as global warming and biodiversity losses. People damage the environment through local activities like clearing land or burning fossil fuels, but the damages only become manifest at larger regional or global scales where no one pays for them. Payments for ecological services like carbon sequestration can correct for these damages caused by scale mismatches. This paper presents a spatially explicit land-use model to investigate the consequences of scale mismatches for pollination and carbon storage services and examine the effect of payment for only carbon storage services. The model integrates processes in multiple spatial scales ranging from the parcel level used by landowners’ decision about deforestation, to the larger scale used by animals to pollinate plants, and finally to the global scale where carbon storage services are supplied. We show that payment for carbon storage services can become an effective mechanism to protect forests at the same time that it creates inequities among landowners in income level.These findings suggest that market-based approaches that focus on conservation of a single ecosystem service may reproduce unequal power relations among landowners.     

A Science Mission for QSAT Project: Study of FACs in the Polar and Equatorial Regions

Kyushu University, Kyushu Institute of Technology and Fukuoka Institute of Technology are now designing, developing and building a micro-satellite called “QSAT”. The primary objective of QSAT is understanding the mechanism of spacecraft charging, which can be achieved with the onboard magnetometer, high-frequency probe (HP) and Langmuir probe (LP). The magnetometer measures the magnetic field variations caused by field-aligned currents (FACs) in the polar and equatorial regions. Polar FACs are well understood, while equatorial FACs are not. The science goals are as follows: (1) to better understand FACs in the polar region, (2) to compare the FACs observed in orbit with ground-based MAGDAS observations, (3) to investigate spatial distribution of FACs in the equatorial region. FACs play a crucial role in the coupling between solar wind, magnetosphere and ionosphere in terms of energy transfer. Also if we understand the relationship between the space and ground-based FACs data, then we can conduct long-term study on the solar wind–magnetosphere–ionosphere coupling in the future by mainly using data from ground-based magnetometer arrays.     

Correction of atmospheric effect on ADEOS/OCTS ocean color data: Algorithm description and evaluation of its performance

This paper first describes the atmospheric correction algorithm for OCTS visible band data used at NASDA/EOC. Sharing a basic structure with Gordon and Wang’s Sea WiFS algorithm, it uses 10 candidate aerosol models including the “Asian dust model” introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands, the algorithm selects a pair of aerosol models that account best for the observed spectral reflectances, and synthesizes the aerosol reflectance used for the atmospheric correction. Two different schemes for determining the value of the parameter for the aerosol model selection are presented and their anticipated estimation error is analyzed in terms of retrieved water reflectance at 443 nm. The results of our numerical simulation show that the standard deviation of the estimation error of the “weighted average” scheme is mostly within the permissible level of ±0.002, reducing the error by 18% on average compared to the “simple average” scheme. The paper further discusses the expected error under the old CZCS-type atmospheric correction, which assumes constant aerosol optical properties throughout the given image. Although our algorithm has a better performance than the CZCS algorithm, further analysis shows that the error induced by the assumption taken in the algorithm that the water-leaving radiance at 670 nm band is negligibly small may be large in high pigment concentration waters, indicating the necessity for future improvements.