Sound velocity and density of liquid Ni68S32 under pressure using ultrasonic and X-ray absorption with tomography methods

A new experimental setup for simultaneous P-wave velocity (V_P) and density (ρ) measurements for liquid alloys is developed using ultrasonic and X-ray absorption methods combined with X-ray tomography at high pressures and high temperatures. The new setup allows us to directly determine adiabatic bulk moduli (K_S) and to discuss the correlation between the V_P and ρ of the liquid sample. We measured V_P and ρ of liquid Ni₆₈S₃₂ up to 5.6 GPa and 1045 K using this technique. The effect of pressure on the V_P and ρ values of liquid Ni₆₈S₃₂ is similar to that of liquid Fe₅₇S₄₃. (Both compositions correspond to near-eutectic ones.) The obtained K_S values are well fitted to the finite strain equation with a $K_{{\text{S}}_0}$ value (K_S at ambient pressure) of 31.1 GPa and a dK_S/dP value of 8.44. The measured V_P was found to increase linearly with increasing ρ, as approximated by the relationship: V_P [m/s] = 1.29 ρ [kg/m³] – 5726, suggesting that liquid Ni–S follows an empirical linear relationship, Birch's law. The dV_P/dρ slope is similar between Ni₆₈S₃₂ and Fe₅₇S₄₃ liquids, while the V_P–ρ plot of liquid Ni–S is markedly different from that of liquid Fe–S, which indicates that the effect of Ni on Birch's law is important for understanding the V_P–ρ relation of planetary and Moon's molten cores.     

Sound velocity and elastic properties of Fe–Ni and Fe–Ni–C liquids at high pressure

The sound velocity (V _P) of liquid Fe–10 wt% Ni and Fe–10 wt% Ni–4 wt% C up to 6.6 GPa was studied using the ultrasonic pulse-echo method combined with synchrotron X-ray techniques. The obtained V _P of liquid Fe–Ni is insensitive to temperature, whereas that of liquid Fe–Ni–C tends to decrease with increasing temperature. The V _P values of both liquid Fe–Ni and Fe–Ni–C increase with pressure. Alloying with 10 wt% of Ni slightly reduces the V _P of liquid Fe, whereas alloying with C is likely to increase the V _P. However, a difference in V _P between liquid Fe–Ni and Fe–Ni–C becomes to be smaller at higher temperature. By fitting the measured V _P data with the Murnaghan equation of state, the adiabatic bulk modulus (K _S0) and its pressure derivative (K _S ^′ ) were obtained to be K _S0 = 103 GPa and K _S ^′  = 5.7 for liquid Fe–Ni and K _S0 = 110 GPa and K _S ^′  = 7.6 for liquid Fe–Ni–C. The calculated density of liquid Fe–Ni–C using the obtained elastic parameters was consistent with the density values measured directly using the X-ray computed tomography technique. In the relation between the density (ρ) and sound velocity (V _P) at 5 GPa (the lunar core condition), it was found that the effect of alloying Fe with Ni was that ρ increased mildly and V _P decreased, whereas the effect of C dissolution was to decrease ρ but increase V _P. In contrast, alloying with S significantly reduces both ρ and V _P. Therefore, the effects of light elements (C and S) and Ni on the ρ and V _P of liquid Fe are quite different under the lunar core conditions, providing a clue to constrain the light element in the lunar core by comparing with lunar seismic data.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.     

The structural behaviour of timber joints subjected to bi‐axial bending

This study investigates the structural performance of interior, exterior and corner traditional timber joints found in a traditional temple in Japan subjected to bi‐axial bending. A total of 36 half‐scale specimens were fabricated and tested under both uni‐axial and bi‐axial cyclic bending for comparison of their structural behaviour. The results show that the corner joints exhibit lower rotational stiffness than the interior and exterior joints. Further, connections subjected to only uni‐axial moments exhibit better performance with regard to moment resistance, energy dissipation and stiffness degradation as compared with those subjected to bi‐axial moments. Hence, this study suggests that if the timber joints are subjected to bi‐axial bending, this effect on timber joints should be considered during the design and evaluation process in the future. Copyright © 2009 John Wiley & Sons, Ltd.     

Detailed Observation of Spatial Abundance of Clam Larva Ruditapes philippinarum in Tokyo Bay, Central Japan

The spatial distribution of the larval abundance of the clam Ruditapes philippinarum has been investigated at 65 stations throughout Tokyo Bay on August 2, 2001. The large number of small D-shaped larvae that were found shortly after hatching in the waters around the Banzu, Futtu, and Sanmaizu-Haneda areas indicates that spawning populations in these areas probably contribute greatly to the larval supply in the bay. Small larvae also occurred abundantly around the Yokohama and Ichihara port areas, suggesting that these port regions play a role in the transport of larvae into Tokyo Bay. This revised version was published online in July 2006 with corrections to the Cover Date.     

Constraining paleo-latitude of a biogeographic boundary in mid-Panthalassa: Fusuline province shift on the Late Guadalupian (Permian) migrating seamount

The Guadalupian paleo-atoll limestone (Iwato Formation) in SW Japan was primarily formed in low-latitude mid-Panthalassa and was later tectonically accreted to South China (Japan) margin during the Jurassic. The present biostratigraphic study clarified that the Iwato Formation consists of 5 biostratigraphical intervals; i.e. four fusuline assemblage zones (Assemblage zones 1 to 4) and a barren interval on the top. Assemblage zones 1 to 4 correspond to the Neoschwagerina craticulifera Zone, N. margaritae Zone, Yabeina globosa Zone, and Lepidolina multiseptata Zone of the conventional Tethyan fusuline stratigraphy, respectively. The present study newly clarified the following significant aspects of paleobiogeography of the Permian fusulines as to the extinction of large-tested taxa in the latest Guadalupian. 1) The long unknown stratigraphic relationship was documented for the first time between the Yabeina-dominant interval and the overlying Lepidolina-dominant one within a single limestone unit. 2) The occurrence of Lepidolina cf. kumaensis Kanmera, the unique last runner of large-tested fusuine, was detected for the first time in mid-oceanic paleo-atoll limestones. 3) With respect to the northbound migration history of the paleo-seamount capped by the Iwato Formation, the development of the two coeval fusuline biogeographic territories in the low-latitude Panthalassa, i.e., the Yabeina territory on the south and the Lepidolina territory on the north, was confirmed. 4) The paleo-latitude of the biogeographic boundary between the Yabeina and Lepidolina territories is constrained around 12° in the southern hemisphere on the basis of the latest geomagnetic data from the same limestone. This new approach utilizing biostratigraphy on ancient migrating seamounts coupled with geomagnetic paleo-latitude data is applicable to other cases in different time-space co-ordinates and of other fossil groups for constraining position of ancient biogeographic boundaries within lost oceanic domains of deep past.     

Song Hong (Red River) delta evolution related to millennium-scale Holocene sea-level changes

The Song Hong (Red River) delta occurs on the northwest coast of the South China Sea. Its evolution in response to Holocene sea-level changes was clarified on the basis of sedimentary facies and 14 radiocarbon dates from the 40 m long Duy Tien core from the delta plain, and using previously reported geological, geomorphological, and archaeological data. The delta prograded into the drowned valley as a result of early Holocene inundation from 9 to 6 cal. kyr BP, as sea-level rise decelerated. The sea-level highstand at +2–3 m from 6 to 4 cal. kyr BP allowed widespread mangrove development on the delta plain and the formation of marine notches in the Ha Long Bay and Ninh Binh areas. During sea-level lowering after 4 cal. kyr BP, the former delta plain emerged as a marine terrace, and the delta changed into the present tide- and wave-influenced delta with accompanying beach ridges. Delta morphology, depositional pattern, and sedimentary facies are closely related to Holocene sea-level changes. In particular, falling sea level at 4 cal. kyr BP had a major impact on the evolution of the Song Hong delta, and is considered to be linked to climate changes.     

Upwelling of oxygen-depleted water (Sumishio) in Omura Bay,Japan

Wind-induced circulation and the distribution of hypoxia corresponding to the upwelling of oxygen-depleted water (called “Aoshio” in Japan and “Sumishio” locally in Omura Bay) in Omura Bay, Japan, was examined field observations and by three-dimensional modeling. During the calm weather in summer, well-mixed strait water, in rich oxygen at the mouth of the bay intruded into the middle layer of the bay, southward and northward along the west and east coast, respectively, forming basin-scale cyclonic circulation. A stagnant water mass was formed below the center of this cyclonic circulation, and it became hypoxic water. As a result of the prevailing strong southeast (northeast) wind, the bottom hypoxia moved in a southeasterly (northeasterly) direction. This induces the upwelling of hypoxic water, accompanied by mass mortality of marine organisms.     

Eccentricity cycles shown by early Pleistocene planktonic foraminifers of the Omma Formation, Sea of Japan

There is a continuous record of planktonic foraminifers for oxygen isotope stages 50 to 26 (ca. 1.5–1.0 Ma) in the early Pleistocene Omma Formation near Kanazawa City, Central Japan, on the Sea of Japan coast. The warm-water species Globigerinoides ruber entered the Sea of Japan with the Tsushima Current during all interglacial periods and went locally extinct in the succeeding glacial periods. This implies that the marine climate of the Sea of Japan varied predominantly with the 41,000-year period of Earth's orbital obliquity. However, the relative abundances of G. ruber in marine isotope stages 47, 43 and 31 are significantly higher than those in other interglacial stages. These stages correspond to periods when eccentricity-modulated precession extremes were aligned with obliquity maxima. The Tsushima Current is a branch of the warm Kuroshio Current which is the strong northwestern component of the subtropical North Pacific Ocean gyre. Our data imply that the early Pleistocene climate in the northwestern Pacific was influenced not only by obliquity cycles but also by eccentricity cycles. This study also supports the climate model regarding eccentricity's role in the origin of low-frequency climate changes before the late Pleistocene ice ages.     

In Situ Measurement of the Lobate Ctenophore Bolinopsis Mikado (Moser) Abundance by the Video Recording System

A video recording system (VRS) with dark-field illumination was designed for continuous observation of the lobate ctenophore Bolinopsis mikado on spatial distribution, abundance and size distribution. In situ operation proved that the VRS was capable to discriminate B. mikado larger than 15 mm in total length at the towing speed around 0.5 m s^–1. The VRS was useful to determine spatial distribution of B. mikado biomass, since it measured the abundance and size composition simultaneously.