A continuum‐discrete hydromechanical analysis of granular deposit liquefaction

A coupled continuum‐discrete hydromechanical model was employed to analyse the liquefaction of a saturated loose deposit of cohesionless particles when subjected to a dynamic base excitation. The pore fluid flow was idealized using averaged Navier–Stokes equations and the discrete element method was employed to model the solid phase particles. A well established semi‐empirical relationship was utilized to quantify the fluid–particle interactions. The conducted simulations revealed a number of salient micro‐mechanical mechanisms and response patterns associated with the deposit liquefaction. Space and time variation of porosity was a major factor which affected the coupled response of the solid and fluid phases. Pore fluid flow was within Darcy's regime. The predicted response exhibited macroscopic patterns consistent with experimental results and case histories of the liquefaction of granular soil deposits. Copyright © 2004 John Wiley & Sons, Ltd.     

Sensitivity analysis of a deterministic water temperature model to forest canopy and soil temperature in Catamaran Brook (New Brunswick,Canada)

A coupled deterministic hydrological and water temperature model, CEQUEAU, was modified to include soil temperature and crown closure in its calculation of local advective terms in the heat budget. The modified model was than tested to verify its sensitivity to these modifications. An analysis of the heat budget of a small forested catchment in eastern Canada revealed that the advective term related to interflow plays a significant role in the daily water heat budget, providing on average 28% of the local advective budget (which also includes advective heat terms from surface runoff and groundwater) and nearly 14% of the total heat budget (which includes all radiative terms at the water surface, convection and evaporation, as well as the local advective terms). Relative sensitivity indices (RSIs) were used to verify the impact of the newly introduced parameters and variables. Among them, parameters related to the forest cover (crown closure and leaf area index) have a maximum RSI of ?0·6; i.e. a 100% increase in value produces a 60% decrease in the local advective term. Parameters with the greatest influence are the volume of water contributing to interflow and the amplitude of the net radiative flux at the soil surface, which, if doubled, would double the contribution of the local interflow advective term to the heat budget. Copyright © 2003 John Wiley & Sons, Ltd.     

Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Interstitial water chemistry of the inner continental shelf sediments off the gironde estuary

The interstitial water composition ( , alkalinity, Ca²⁺, Mg²⁺, Sr²⁺, Na⁺, K⁺) and the cation exchange capacity (CEC) were determined for the muddy sediments of the continental shelf off the Gironde Estuary (France), in the area where the sediment represents the deposit of the muddy suspension of the river. In comparison with seawater concentrations, the pore waters below 10 cm depth, show depletions of and Ca²⁺ and below a 30 cm depth show depletions of Mg²⁺. Inversely, the upper 10 cm an enrichment of Ca²⁺ concentration, and an increase of K⁺ concentration to a 40 cm depth. High values of are observed at the top 4 cm. Alkalinity enrichment is observed along the length of the core. Applying the alkalinity models for the sediment below a 10 cm depth demonstrates generally that calculated alkalinities are higher than the measured ones. Ca²⁺ dissolution occurs at the first 10 cm and authigenic carbonate precipitation starts beneath that level. Mg²⁺ depletion is accompanied by bicarbonate loss. This proves that Mg²⁺ depletion is due to a Mg-silicate reaction. The result of the CEC does not confirm the Mg²⁺ uptake by clay minerals in exchangeable site, under reducing conditions. Diffusion and bioturbation play an important role in the pore water concentration at the top of the core.     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Tectonic and hydrodynamic control of landslides in the northern area of the Central Rif, Morocco

The northern edge of the Central Rif (Morocco) is subject to numerous landslides where mechanisms do not correspond to the classical models used by geomechanics specialists. It is necessary to adopt a multidisciplinary approach that combines geomorphology, geology, hydrogeology, and geotechnics in order to understand how such slope failures are generated, especially in a region with a heterogeneous structure characterised by significant lithological differences, severe fracturing, and thrust sheets where tectonic contacts play a major role in groundwater circulation. This report shows that these failures are essentially controlled by the tectonic contact separating the Tisirene and Chouamat thrust sheets and by subsurface hydrodynamic conditions. A model of spatial and temporal variations in the factor of safety is proposed.     

Platinum group minerals in podiform chromitites of the Bou Azzer ophiolite, Anti Atlas, Central Morocco

Summary The Neoproterozoic Bou Azzer ophiolite complex hosts numerous, small lenticular bodies of massive and disseminated chromite. Metallurgical-grade high-Mg and high-Cr spinels (cores with 48–62 wt% Cr₂O₃) reveal complex alteration patterns of successive Cr and Mn enrichment and loss of Al towards the rims, while the Mg# ratios [(Mg/(Mg + Fe²⁺)] remain almost constant. Concentration patterns of platinum-group elements are typical for ophiolitic chromitite poor in sulfides, with predominance of the IPGE, variable Rh, and low Pt and Pd. The most abundant platinum-group mineral is Rh-bearing laurite that occurs either included in spinel or in silicate matrix, whereas Os-Ir-Ru alloy is always included in spinel. Laurite inclusions reveal complex intergrowth textures with Rh-Ru-Pt rich alloy, and with Rh-rich sulfide. Most laurites display trends to sulfur-poor compositions leading to local formation of very fine-grained Ru-Os-Ir alloy phases. Ni-Co-Fe sulfides, arsenides and sulfarsenides devoid of PGE are associated with the alteration of chromite. Textural position and chemical composition of the base metal inclusions, as well as comparison of alteration features between chromite and accessory chromian spinel in the Co-Ni-As ores of the Bou Azzer ophiolite indicate a close connection. It is suggested that hydrothermal fluids percolated through the marginal zones of the ophiolite belt during greenschist facies metamorphism and deposited Ni-Co-Fe arsenides, sulfarsenides and minor sulfides as accessories within altered chromitites, and also in structurally favourable zones as Ni-Co-As ores. Author’s address: Dr. Frank Melcher, Federal Institute for Geosciences and Natural Resources, Stilleweg 2, 30655 Hannover, Germany     

Use of genetic algorithm in new approach to modeling of flood routing

Journal of Oceanology and Limnology - The hydrological models and simplified methods of Saint-venant equations are used extensively in hydrological modeling, in particular for the simulation of the...     

Pan-African high-grade metamorphism of southern Sinai,Egypt, fluid inclusion evidence

Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO ₂ , H₂O and (H₂O-CO₂) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser extent, CO₂-rich fluids are the most abundant fluids. The present study suggests that high-density CO₂ inclusions were formed at the earliest stage, while H₂O inclusions were formed at the late stage. In an intermediate stage, low-density CO₂ and H₂O, CO₂ inclusions were formed. At the early stage of uplift and during melt crystallization, the CO₂-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H₂O released at the time of crystallization of the melt was trapped as inclusions.