应用GPS观测青藏高原东北缘应力场变化

采用各向同性弹性地球模型推导了地面位移场速率与地壳内任意点应力场变化的边界积分关系,同时利用青藏高原东北缘1999～2001年观测的GPS资料对观测区地壳深度为5 km和25 km的主应力和最大剪应力进行了计算分析.结果表明,青藏高原东北缘的主应力变化主要集中在祁连山断裂、海原断裂等,在1920～1954年间历史上发生过多次震级为7.0～8.5级强震的断裂附近,并具有主应力变化沿断层走向分布、最大剪应力沿断层走向交替变化等特征.     

Microbial release of potassium from K-bearing minerals by thermophilic fungus Aspergillus fumigatus

A strain of thermophilic fungus Aspergillus fumigatus was cultured with K-bearing minerals to determine if microbe-mineral interactions enhance the release of mineralic potassium. Experiments were carried out in two settings, one with the mineral grains and the fungal cells in direct contact, and the other employing a membrane (pore size 0.22 μm) to separate the two. Measurements over a period of 30 days showed that, irrespective of the experimental setup, the concentration of free K in the culture was drastically higher than those in any of the control experiments where no living organism was present. Moreover, the occurrence of mineral-cell physical contact enhanced potassium release by an additional factor of 3 to 4 in comparison to the separation experiments. For contact experiments, Electron Probe Microanalysis revealed the formation of mycelium-mineral aggregates, and Atomic Force Microscopy imaging further indicated the possible ingestion of mineral particles by the fungus cells. Contrasting to what was observed and expected in control experiments, the potassium solubilization rate showed a positive dependence upon pH when fungi and minerals were mixed directly, and exhibited no correlations with solution acidity if cell-rock contact was restrained. These results appear to suggest that A. fumigatus promoted potassium release by means of at least three likely routes, one through the complexation of soluble organic ligands, another appealing to the immobile biopolymers such as the insoluble components of secretion, and the third related to the mechanical forces in association with the direct physical contact between cells and mineral particles.     

Copula函数在多变量水文分析计算中的应用及研究进展

综述了多变量水文分析计算方法及存在的问题.系统地介绍了Copula函数的基本理论与方法,分析探讨Copula函数在多变量水文计算领域的适用性及优越性.总结了Copula函数应用的关键技术,包括参数估计、拟合检验及类型选择等,并展望了Copula函数的研究应用前景.     

阿尔金南缘构造带西段辉绿岩墙群的地球化学特征及构造环境

对阿尔金南缘构造带西段辉绿岩墙群的岩石学和地球化学的详细研究表明,该区辉绿岩墙群为拉斑系列岩石,其主量元素以中等TiO2(1.19%～1.59%)、高MgO(5.51%～7.88%)、贫K2O(0.04%～0.84%)和P2O5(0.10%～0.20%)、Na2OK2O为特征;高场强元素(HFSE)丰度特征显示其为E-MORB型或过渡型玄武岩质岩石;稀土元素总量相对较高,轻重稀土元素分馏不显著[(La/Yb)N=1.93～3.61,LREE/HREE=3.01～4.10],在球粒陨石标准化配分模式图上呈略富集型.结合玄武岩构造环境判别图解综合分析推测,它们可能形成于一种裂谷向MORB环境过渡的构造环境,即初始小洋盆构造环境.     

鱼类生长激素的体内代谢、分泌调控和作用机制研究的进展

主要对１９８３－１９９６年间关于鱼类生长激素的体内代谢、分泌调控和作用机制的研究进展予以综合评述。通过鱼类划性放射免疫测定法的建立和体风代谢动力学研究，证实，外源生长激素在鱼体内不会产生积累。鱼类生长激素的分泌调控受下丘脑分泌的生长激素释放因子（ＧＨＲＦ）和释放抑制因子（ＳＲＩＦ）的双重；促性腺激素释放激素（ＧｎＲＨ）、雌二醇（Ｅ２）、促甲状腺素释放激素（ＴＲＨ）和神经肽（ＮＹＰ）对鱼类生长激素的     

廉州湾及其邻近水域初级生产力研究

１９９２～１９９３年，在对廉州湾及其邻近海域的环境调查中，首次对该海区叶绿素ａ与初级生产力进行了测定。获得叶绿素ａ的春季平均值为１．００ｍｇ·ｍ－３，秋季为０．２９ｍｇ·ｍ－３，初级生产力的平均值为３０１．５ｍｇ·ｍ－２·ｄ－１。文章对调查区初级生产力的分布特征及变化规律进行了探讨，并与北方沿海的初级生产力水平进行了比较。     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.