Geochemical specialization of the tin-bearing granitoid massifs of NW Bohemia

The geochemistry of Hercynian tin-bearing granitoid massifs of the Krune hory Mts. (Erzgebirge), Slavkovský les Forest (Kaiserwald) and Smriny (eastern Fichtelgebirge) is compared by statistical processing of 270 analyses including a wide spectrum of major and trace elements. Seven different types of granites are distinguished. Out of these, five types represent the successive differentiation of the largest massif of NW Bohemia: the Karlovy Vary (Karlsbad) massif. This comprises strongly differentiated peraluminous granites evolving towards extreme Li-Rb-Cs-F-and Sn-enrichment in the youngest members, which are albite-topaz-zinwaldite lithium granites. The sixth and seventh types are different from the former by their location in the eastern Krune hory and tectonic setting, and they display geochemical features of anorogenic granites: they are metaluminous albite-zinwaldite granites with marked enrichment of Nb, Y, and HREE in addition to Li, Rb, Cs, F and Sn, indicating contamination by sub-crustal material. Sn-W mineralizations, including flat peri-contact greisen bodies, steep greisen veins and tourmalinized phyllites, are all intimately associated with the most strongly differentiated granites — the Li-granite and the Cinovec-granite respectively.     

Geochemistry, petrology and ages of the lunar meteorites Kalahari 008 and 009: New constraints on early lunar evolution

Kalahari 008 and 009 are two lunar meteorites that were found close to each other in Botswana. Kalahari 008 is a typical lunar anorthositic breccia; Kalahari 009 a monomict breccia with basaltic composition and mineralogy. Based on minor and trace elements Kalahari 009 is classified as VLT (very-low-Ti) mare basalt with extremely low contents of incompatible elements, including the REE. The Lu-Hf data define an age of 4286 ± 95 Ma indicating that Kalahari 009 is one of the oldest known basalt samples from the Moon. It provides evidence for lunar basalt volcanism prior to 4.1 Ga (pre-Nectarian) and may represent the first sample from a cryptomare. The very radiogenic initial ¹⁷⁶Hf/¹⁷⁷Hf (εHf = +12.9 ± 4.6), the low REE, Th and Ti concentrations indicate that Kalahari 009 formed from re-melting of mantle material that had undergone strong incompatible trace element depletion early in lunar history. This unusually depleted composition points toward a hitherto unsampled basalt source region for the lunar interior that may represent a new depleted endmember source for low-Ti mare basalt volcanism. Apparently, the Moon became chemically very heterogeneous at an early stage in its history and different cumulate sources are responsible for the diverse mare basalt types.Evidence that Kalahari 008 and 009 may be paired includes the similar fayalite content of their olivine, the identical initial Hf isotope composition, the exceptionally low exposure ages of both rocks and the fact that they were found close to each other. Since cryptomaria are covered by highland ejecta, it is possible that these rocks are from the boundary area, where basalt deposits are covered by highland ejecta. The concentrations of cosmogenic radionuclides and trapped noble gases are unusually low in both rocks, although Kalahari 008 contains slightly higher concentrations. A likely reason for this difference is that Kalahari 008 is a polymict breccia containing a briefly exposed regolith, while Kalahari 009 is a monomict brecciated rock that may never have been at the surface of the Moon.Altogether, the compositions of Kalahari 008 and 009 permit new insight into early lunar evolution, as both meteorites sample lunar reservoirs hitherto unsampled by spacecraft missions. The very low Th and REE content of Kalahari 009 as well as the depletion in Sm and the lack of a KREEP-like signature in Kalahari 008 point to a possible source far from the influence of the Procellarum-KREEP Terrane, possibly the lunar farside.     

Sr Isotope Composition of Mud Volcanic Waters in the Kerch–Taman Province

Doklady Earth Sciences - Waters at seventeen mud volcanoes of the Kerch–Taman province in the Northwestern Cis-Caucasus region have been analyzed for Sr isotope composition. The 87Sr/86Sr...     

Paragenesis of unusual Fe-cordierite (sekaninaite)-bearing paralava and clinker from the Kuznetsk coal basin,Siberia, Russia

Sekaninaite (X_Fe > 0.5)-bearing paralava and clinker are the products of ancient combustion metamorphism in the western part of the Kuznetsk coal basin, Siberia. The combustion metamorphic rocks typically occur as clinker beds and breccias consisting of vitrified sandstone–siltstone clinker fragments cemented by paralava, resulting from hanging-wall collapse above burning coal seams and quenching. Sekaninaite–Fe-cordierite (X_Fe = 95–45) is associated with tridymite, fayalite, magnetite, ± clinoferrosilite and ±mullite in paralava and with tridymite and mullite in clinker. Unmelted grains of detrital quartz occur in both rocks (<3 vol% in paralavas and up to 30 vol% in some clinkers). Compositionally variable siliceous, K-rich peraluminous glass is <30% in paralavas and up to 85% in clinkers. The paralavas resulted from extensive fusion of sandstone–siltstone (clinker), and sideritic/Fe-hydroxide material contained within them, with the proportion of clastic sediments ≫ ferruginous component. Calculated dry liquidus temperatures of the paralavas are 1,120–1,050°C and 920–1,050°C for clinkers, with calculated viscosities at liquidus temperatures of 10^1.6–7.0 and 10^7.0–9.8 Pa s, respectively. Dry liquidus temperatures of glass compositions range between 920 and 1,120°C (paralava) and 920–960°C (clinker), and viscosities at these temperatures are 10^9.7–5.5 and 10^8.8–9.7 Pa s, respectively. Compared with worldwide occurrences of cordierite–sekaninaite in pyrometamorphic rocks, sekaninaite occurs in rocks with X_Fe (mol% FeO/(FeO + MgO)) > 0.8; sekaninaite and Fe-cordierite occur in rocks with X_Fe 0.6–0.8, and cordierite (X_Fe < 0.5) is restricted to rocks with X_Fe < 0.6. The crystal-chemical formula of an anhydrous sekaninaite based on the refined structure is | \textK_0.02 |(\textFe_1.54^{2 +} \textMg_0.40 \textMn_0.06 )_{\Upsigma 2.00}^M [(\textAl_1.98 \textFe_0.02^{2 +} \textSi_1.00 )_{\Upsigma 3.00}^T1 (\textSi_3.94 \textAl_2.04 \textFe_0.02^{2 +} )_{\Upsigma 6.00}^T2 \textO₁₈ ]. \left| {{\text{K}}_{0.02} } \right|({\text{Fe}}_{1.54}^{2 + } {\text{Mg}}_{0.40} {\text{Mn}}_{0.06} )_{\Upsigma 2.00}^{M} [({\text{Al}}_{1.98} {\text{Fe}}_{0.02}^{2 + } {\text{Si}}_{1.00} )_{\Upsigma 3.00}^{T1} ({\text{Si}}_{3.94} {\text{Al}}_{2.04} {\text{Fe}}_{0.02}^{2 + } )_{\Upsigma 6.00}^{T2} {\text{O}}_{18} ].     

Fluid regime and diamond formation in the reduced mantle: Experimental constraints

The composition and potential diamond productivity of C–O–H fluids that could exist in the reduced regions of the Earth’s upper mantle and in the mantles of Uranus and Neptune were studied in experiments at 6.3 GPa and 1400–1600 °C and durations of 15–48 h. Hydrogen fugacity in the fluid phase was controlled by the Mo–MoO₂ or Fe–FeO buffers, using a specially modified double-capsule method. The oxygen fugacity in the samples was controlled by adding different amounts of water, stearic acid, anthracene, and docosane to a graphite charge. At high P–T conditions, the degree of decomposition of the heavy hydrocarbons added to the charge was 99.9%. The composition of the fluids coexisting with graphite/diamond in the buffered experiments varied from H₂O  H₂ > CH₄ (at fO₂ somewhat lower than the “water maximum”) to H₂ > CH₄ > (C₂H₄ + C₂H₆)>C₃H₈ (in C–H system). In the C–H system the maximum concentrations of major species in the synthesized fluid were: H₂ = 79 mol.% and CH₄ = 21 mol.%. The composition of the H₂-rich fluids, which were synthesized at 6.3 GPa and 1400–1600 °C for the first time, differs considerably from that of the ultra-reduced CH₄-rich fluids stable at 2.0–3.5 GPa and 1000–1300 °C. Thermodynamic calculations of the reduced C–O–H fluids at the P–T conditions of the experiments revealed CH₄-rich compositions (CH₄  H₂ > (C₂H₄ + C₂H₆)>C₃H₈), which however drastically differed from the synthesized compositions. The rates of diamond nucleation and growth in the experiments depended on the fluid composition. Diamond crystallization had a maximum intensity in the pure aqueous fluids, while in the H₂-rich fluids no diamond formation was observed. Only metastable graphite precipitated from the ultra-reduced fluids. The type of the initial hydrocarbon used for the fluid generation did not affect this process.     

Effect of oxygen fugacity on the H2O storage capacity of forsterite in the carbon-saturated systems

High pressure experiments have been performed in the systems Mg₂SiO₄-C-O-H and Mg₂SiO₄-K₂CO₃-C at 6.3 GPa and 1200 to 1600 °C using a split-sphere multi-anvil apparatus. In the Mg₂SiO₄-C-O-H system the composition of fluid was modeled by adding different amounts of water and stearic acid. The fO₂ was controlled by the Mo-MoO₂ or Fe-FeO oxygen buffers. Several experiments in the Mg₂SiO₄-C-O-H system and all experiments in the Mg₂SiO₄-K₂CO₃-C system have been conducted without buffering the fO₂. Forsterite in the system Mg₂SiO₄-K₂CO₃-C does not reveal OH absorption bands in the IR spectra, while forsterite coexisting with carbon-bearing fluid and silicate melt at logfO₂ from FMQ-2 to FMQ-5 (from 2 to 5 log units below fayalite-magnetite-quartz oxygen buffer) contains 800-1850 wt. ppm H₂O. The maximum concentrations were detected at 1400 °C and FMQ-3.5. We observed an increase in the solidus temperature in the system Mg₂SiO₄-C-O-H from 1200 to above 1600 °C with log fO₂ decreasing from FMQ-2 to FMQ-5. The increase of the solidus temperature and the broadening of the stability field of the H₂O-H₂-CH₄ subsolidus fluid phase at 1400-1600 °C explain the high H₂O storage capacity of forsterite relative to that crystallized from carbon-free, oxidized, hydrous, silicic melt. At temperatures above 1400 °C liquidus forsterite precipitated along with diamond from oxidized (FMQ-1) carbonate-silicate melt and from silicate melt dissolving the moderately reduced C-O-H fluid (from FMQ-2 to FMQ-3.5). Formation of diamond was not detected under ultra-reduced conditions (FMQ-5) at 1200-1600 °C. Olivine co-precipitating with diamond from dry carbonate-silicate or hydrous-silicic fluid/melt can provide information on the H₂O contents and speciation of the diamond-forming media in the mantle. The conditions for minimum post-crystallization alteration of olivine and its hydrogen content are discussed.     

Quaternary travertine of the Kurai fault zone (Gorny Altai)

In the Kurai fault zone, travertine forms a matrix cementing clastic material of colluvial and glacial deposits or rarely forming a stockwork in a system of fractures in Palaeozoic rocks. The regular change of composition of solutions in the process of travertine formation has resulted in change of stable Mg–calcite by Sr–aragonite. According to the carbon isotopic composition, the travertine has intermediate genesis between thermal and meteogene. The light oxygen isotopic composition of CaCO₃ indicates formational water input. The carbonates inherited Y, Sr, U, and Ni and in some areas, V, As, and Zn from the endogeneous water sources. Given that the Kurai zone travertine cements the Late Pleistocene–Holocene sediments and ¹⁴C dating of the carbonates gives a range of >40 000–3475 ± 35 years, the faults serving as routes of migration of the solutions forming the travertine should be considered as active structures.     

Comparison of several methods for the solution of the Helmholtz equation

Summary A series of Helmholtz equations has to be solved in short-range weather forecast models which use a splitting scheme of integration. For these purposes the successive overrelaxation, the Gauss-Seidel relaxation, the conjugate gradient method, the steepest descent method, the full-multigrid method and the direct method based on the minimum degree algorithm were used and their efficiencies were compared. It was found that the full-multigrid method was the most efficient among the iterative methods in terms of computational time, and that the effect rapidly increased with the grid size. The direct method may be an appropriate approach if the solution is repeated for various right-hand sides, but it requires large auxiliary computer memory. The selection of the optimum method depends on the concrete problem being solved and on the computer memory available.