Japan-equator XBT sections in late November 1989 and in early December 1991

A comparison between Japan-equator XBT sections along 150°E in late November 1989 and along 140°E in early December 1991 is made. The warmest surface water above 29°C diminished to the south of 2–4°N and the surface mixed layer noticeably decreased in thickness in the equatorial region in December 1991; besides, the North Equatorial Countercurrent was intensified. This is considered to be a manifestation of changes in the surface layer of the western equatorial Pacific in the mature phase of El Niño.     

U-Pb Age Determination for Seven Standard Zircons using Inductively Coupled Plasma–Mass Spectrometry Coupled with Frequency Quintupled Nd-YAG (λ = 213 nm) Laser Ablation System: Comparison with LA-ICP-MS Zircon Analyses with a NIST Glass Reference Material

This paper evaluates the analytical precision, accuracy and long‐term reliability of the U‐Pb age data obtained using inductively coupled plasma–mass spectrometry (ICP‐MS) with a frequency quintupled Nd‐YAG (λ = 213nm) laser ablation system. The U‐Pb age data for seven standard zircons of various ages, from 28 Ma to 2400 Ma (FCT, SL13, 91500, AS3, FC1, QGNG and PMA7) were obtained with an ablation pit size of 30 μm diameter. For ²⁰⁷Pb/²⁰⁶Pb ratio measurement, the mean isotopic ratio obtained on National Institute of Standards and Technology (NIST) SRM610 over 4 months was 0.9105 ± 0.0014 (n = 280, 95% confidence), which agrees well with the published value of 0.9096. The time‐profile of Pb/U ratios during single spot ablation showed no significant difference in shape from NIST SRM610 and 91500 zircon standards. These results encouraged the use of the glass standard as a calibration standard for the Pb/U ratio determination for zircons with shorter wavelength (λ = 213 nm) laser ablation. But ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages obtained by this method for seven zircon standards are systematically younger than the published U‐Pb ages obtained by both isotope dilution–thermal ionization mass spectrometry (ID‐TIMS) and sensitive high‐resolution ion‐microprobe (SHRIMP). Greater discrepancies (3–4% younger ages) were found for the ²⁰⁶Pb/²³⁸U ages for SL13, AS3 and 91500 zircons. The origin of the differences could be heterogeneity in Pb/U ratio on SRM610 between the different disks, but a matrix effect accuracy either in the ICP ion source or in the ablation‐transport processes of the sample aerosols cannot be neglected. When the ²⁰⁶Pb/²³⁸U (= 0.2302) newly defined in the present study is used, the measured ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages for the seven zircon standards are in good agreement with those from ID‐TIMS and SHRIMP within ±2%. This suggests that SRM610 glass standard is suitable for ICP‐MS with laser ablation sampling (LA‐ICP‐MS) zircon analysis, but it is necessary to determine the correction factor for ²⁰⁶Pb/²³⁸U by measuring several zircon standards in individual laboratories.     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

An experimental study on seismic responses of multifunctional vibration‐absorption reinforced concrete megaframe structures

Two models are tested on a shake‐table. One of the models is a normal reinforced concrete megaframe structure and the other is a multifunctional vibration‐absorption reinforced concrete megaframe structure in which the laminated rubber bearings are placed between the major frame and the minor frames. Two earthquake motions (the El Centro wave and the Taft wave) are used during the test. This paper presents the dynamic characteristic, the seismic responses and the failure mechanism of these two models under varying peak acceleration levels for each of the earthquake motions. The test results demonstrate that the aseismic behavior of a multifunctional vibration‐absorption reinforced concrete megaframe structure is much better than that of a normal reinforced concrete megaframe structure. Copyright © 2003 John Wiley & Sons, Ltd.     

西藏班戈县东嘎花岗岩体特征及锡找矿前景分析

东嘎花岗岩体位于冈底斯一念青唐古拉板片北缘、班公错一怒江结合带中段班戈一崩错板片。岩体时代为燕山晚期,属印度一欧亚板块碰撞造山构造环境。岩石属富钠、硅铝过饱和类型,该岩体位于斑戈一嘉黎一波密一察隅锡成矿远景带内,岩浆分异程度高,具有S型花岗岩体的典型特征,与滇西、川西含锡花岗岩体特征相似,成矿条件有利。区域化探资料显示锡异常明显,异常为Sn、Rb、Y、u、Nb、Ag、w、Th、Pb等多元素组合。sn元素的强度高、规模大。据区域地质、岩石化学及地球化学特征及区域成矿资料,东嘎花岗岩体具有良好的锡成矿前景。     

Observations of the North Equatorial Current,Mindanao Current,and Kuroshio current system during the 2006/07 El Niño and 2007/08 La Niña

Two onboard observation campaigns were carried out in the western boundary region of the Philippine Sea in December 2006 and January 2008 during the 2006/07 El Niño and the 2007/08 La Niña to observe the North Equatorial Current (NEC), Mindanao Current (MC), and Kuroshio current system. The NEC and MC measured in late 2006 under El Niño conditions were stronger than those measured during early 2008 under La Niña conditions. The opposite was true for the current speed of the Kuroshio, which was stronger in early 2008 than in late 2006. The increase in dynamic height around 8°N, 130°E from December 2006 to January 2008 resulted in a weakening of the NEC and MC. Local wind variability in this region did not appear to contribute to changes in the current system.     

ESR dating of palaeolithic calcite: A comparison between powder and monocrystal spectra with thermal annealing

Evolution of ESR spectra with thermal annealing at different temperatures is studied for a monocrystal calcite taken in the Orgnac III site. Up to 20 ESR lines are recognized from the angular dependence of these lines. These lines are compared with the ESR lines observed for powder and rotating monocrystal calcites.The h1 line (g = 2.0057) and h3 line (g = 2.0007) are isotropic or nearly isotropic and are due to the electrons trapped in the amorphous region formed by fission tracks or alpha-ray recoil nuclei. The h2 line (g = 2.0021) is a composite of several different lines.     

Space-time distribution patterns of destructive earthquakes in the inner belt of central Japan: Activity intervals and locations of earthquakes

Based on a block structure model of the inner belt of central Japan, an examination was conducted of the space-time distribution patterns of destructiv magnitudes M 6.4 or greater (M =Japan Meteorological Agency Scale). The distribution patterns revealed a periodicity in earthquake activit seismic gaps. Major NW—SE trending left-lateral active faults divide the inner belt of central Japan into four blocks, 20–80 km wide. The occurrenc A.D. with M ≥ 6.4, which have caused significant damage, were documented in the inner belt of central Japan. The epicenters of these earthquakes close to the block boundaries.

Using the relationship between the magnitude of earthquakes which occurred in the Japanese Islands and the active length of faults that generated them, movement is calculated for each historical earthquake. Space—time distributions of earthquakes were obtained from the calculated lengths, the latitud of generation. When an active period begins, a portion or segment of the block boundary creates an earthquake, which in turn appears on the ground surf active period ends when the block boundary generates earthquakes over the entire length of the block boundary without overlapping.

Five seismic gaps with fault lengths of 20 km or longer can be found in the inner belt of central Japan. It is predicted that the gaps will generate ea magnitudes of 7.0. These data are of significance for estimating a regional earthquake risk over central Japan in the design of large earthquake resist

The time sequences of earthquakes on the block boundaries reveal a similar tendency, with alternating active periods with seismic activity and quiet pe activity. The inner belt of central Japan is now in the last stage of an active period. The next active period is predicted to occur around 2500 A.D.