排序方式: 共有6条查询结果,搜索用时 15 毫秒
1
1.
Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan 总被引:1,自引:0,他引:1
In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites. 相似文献
2.
Masumi?Ujiie?MikoshibaEmail author Satoshi?Kanisawa Yukihiro?Matsuhisa Shigeko?Togashi 《Contributions to Mineralogy and Petrology》2004,146(4):433-449
The Orikabe Plutonic Complex, northeast Japan, is a zoned pluton and one of the Cretaceous intrusions in the Circum-Pacific area. In the Main body, K-rich calc-alkaline rocks composed of marginal gabbro and a large amount of monzodiorite–quartz monzonite–monzogranite are intruded successively by innermost calc-alkaline rocks of granodiorite. The gabbro and monzodiorite–monzogranite have a continuous chemical variation, while the granodiorite has lower concentrations of K, Rb, Y, Zr, Nb and F at the same SiO2 content. The gabbro and monzodiorite–quartz monzonite have a Rb-Sr whole-rock age of 119±12 Ma with an initial 87Sr/86Sr ratio of 0.70392±0.00007. The initial 87Sr/86Sr ratio of the innermost granodiorite is estimated to be about 0.7042. The 18O values of fresh rocks range from +6.7 to +8.3, indicating a positive correlation with SiO2 contents. The K-rich calc-alkaline rocks were derived through fractional crystallization from a mafic parental magma with a slightly high 18O value, implying a major contribution of a sub-arc mantle at a continental margin. Trace element modeling indicates that the source could have been a fertile lherzolite enriched in LILE and depleted in HFSE. The innermost granodiorite was the differentiation product of a distinct parental magma, suggesting the involvement of a small amount of crustal component in the source and partial melting under a more hydrous condition.Editorial responsibility: J. Hoefs 相似文献
3.
Arito Sakaguchi Akiko Yanagihara Kohtaro Ujiie Hidemi Tanaka Masanori Kameyama 《Tectonophysics》2007,443(3-4):220
Burial depth, cumulative displacement, and peak temperature of frictional heat of a fault system are estimated by thermal analysis in the fold–thrust belt of the Western Foothills complex, western Taiwan based on the vitrinite reflectance technique. The regional thermal structure across the complex reveals that the rocks were exposed to maximum temperatures ranging from 100 °C to 180 °C, which corresponds to a burial depth of 3.7–6.7 km. A large thermal difference of 90 °C were observed at the Shuilikeng fault which make the eastern boundary of the fold–thrust belt where it is in contact with metamorphic rock of Hsuehshan Range. The large thermal difference corresponds to cumulative displacements on the Shuilikeng fault estimated to be in the range of 5.2–6.9 km. However, thermal differences in across the Shuangtung and Chelungpu faults cannot be determined apparently due to small vertical offsets. The large displacement observed across the Shuilikeng fault is absent at the other faults which are interpreted to be younger faults within the piggyback thrust system. Localized high temperatures adjacent to fault zones were observed in core samples penetrating the Chelungpu fault. Three major fracture zones were observed at core lengths of 225 m, 330 m, and 405 m and the two lower zones which comprise dark gray narrow shear zones. A value of vitrinite reflectance of 1.8%, higher than the background value of 0.8%, is limited at a narrow shear zone of 1 cm thickness at the fracture zone at 330 m. The estimated peak temperature in the range of 550–680 °C in the shear zone is far higher than the background temperature of 130 °C, and it is interpreted as due to frictional heating during seismic faulting. 相似文献
4.
日本南海海槽俯冲增生楔前缘的构造变形特征 总被引:1,自引:0,他引:1
对增生楔不同压力—温度条件下的构造变形、流体活动、沉积特征、岩石物性和化学组成等多方面的直接观测,可以帮助分析俯冲带地震的蕴育和发生的环境与机理。通过参加IODP的日本南海海槽发震带研究项目(NanTroSEIZE)第一阶段316航次所收集到的大量第一手数据和资料,分别在4个站位上(C0004,C0006,C0007,C0008)对日本南海海槽增生楔前缘岩芯尺度上的构造变形进行了详细分析,并且讨论了岩芯尺度上的构造变形与增生楔中大尺度的非序列分支逆冲断层和前缘逆冲断层的构造变形之间的关系。发现逆冲变形不是只在大尺度的逆冲断层面上进行,而是弥散分布在主逆冲断层面、次级逆冲断层面以及断层面之间的更小的尺度上。小尺度构造的倾向与大尺度断层的倾向有较好的一致性,表明它们是在相同的应力场下所形成的。在增生楔浅部高角度的正断层比较发育,显示张性应力场特征,同时所获得的岩芯尺度上的地层倾角较大并倾向与反射地震以及区域地质分析结果非常吻合,而在深部,特别是在大尺度逆冲断层发育带附近,各种类型的断层、滑移变形带、节理等非常普遍,同时层理与劈理的产状的复杂变化更多地受控于复杂的逆冲断层带的作用。 相似文献
5.
Abstract The 1999 Chi-Chi earthquake in Taiwan ( M w = 7.6) produced a surface rupture along the north–south-striking Chelungpu thrust fault with pure dip-slip (east side up) and left lateral strike-slip displacements. Near-field strong-motion data for the northern part of the fault illustrate a distinct lack of the high-frequency seismic radiation associated with a large slip (10–15 m) and a rapid slip velocity (2–4 m/s), suggesting a smooth seismic slip associated with low dynamic frictional resistance on the fault. A drillhole was constructed at shallow depths in the possible fault zones of the northern part of the Chelungpu Fault, which may have slipped during the 1999 earthquake. One of the zones consists of a 20-cm-thick, unconsolidated fault breccia with a chaotic texture lacking both discrete slip surfaces (e.g. Riedel shears) and grain crushing. Other possible fault zones are marked by the narrow (less than a few centimeters) gouge zone in which clayey material intrudes into the damaged zone outside of the gouge zone. These characteristic fault rock textures suggest that the slip mechanisms at shallow levels during the earthquake involved either granular flow of initially unconsolidated material or slip localization under elevated pore pressure along the narrow clayey gouge zone. Because both mechanisms lead to low dynamic frictional resistance on the fault, the rapid seismic slip in the deep portions of the fault (i.e. the source region of strong-motion radiation) could have been accommodated by frictionless slip on the shallow portions of the fault. The combination of strong-motion data and fault rock analysis suggests that smooth slip associated with low dynamic friction occurred on both the deep and shallow portions of the fault, resulting in a large slip between the source region and the surface in the northern region. 相似文献
6.
Eisei Ikesawa Gaku Kimura Katsushi Sato Kotoe Ikehara-Ohmori Yujin Kitamura Asuka Yamaguchi Kohtaro Ujiie Yoshitaka Hashimoto 《Tectonophysics》2005,401(3-4):217-230
A tectonic mélange exposed on land is examined to reveal relationships between mélange formation, underplating, and deformation mechanisms, focusing on the deformation of basaltic rocks. The studied Mugi Mélange of the Shimanto Belt is composed of a shale matrix surrounding various blocks of sandstone, pelagic sediments, and basalts. The mélange was formed during Late Cretaceous to early Tertiary times in a subduction zone under P–T conditions of 150–200 °C and 6–7 km depth as estimated from vitrinite reflectance and quartz veins fluid inclusions. The mélange represents a range of deformation mechanisms; pressure solution with micro-scale cataclasis in the shale matrix, brittle tension cracking in the blocks, and ubiquitous strong cataclasis in the basal portion of basaltic layers. The cataclastic deformation in the basalts suggests a breakage of a topographic high in the seismogenic depth. 相似文献
1