Capturing strain localization in reinforced soils

Lade’s single hardening soil model with Cosserat rotation embodied in the finite element method is employed to investigate the behavior of geosynthetic reinforced soils with special attention to the development of shear banding. The ability of the finite element model to detect shear banding in a reinforced soil is examined against three high quality small-scale laboratory plane strain tests on Toyoura sand with and without reinforcement. These three tests were chosen because of the clear failure surfaces that developed in the soil during loading. The FEM analyses were able to reasonably simulate the plane strain laboratory tests including both unreinforced and reinforced cases. The FEM analyses gave reasonably good agreement with the experimental results in terms of global stress–strain relationships and shear band occurrences. Furthermore, and based on FE analyses of a hypothetical geosynthetic reinforced soil (GRS) retaining wall, it is shown that the geosynthetic reinforcements are very effective in hindering the formation of shear bands in GRS retaining walls when small spacing between the reinforcement layers was used. When used properly, the geosynthetic reinforcements made the soil behave as a truly reinforced mass of considerable stiffness and strength.     

Analysis of hydrologic relations between Eğirdir-Beyşehir-Suğla lakes system and adjacent basins by means of remote sensing techniques (southern Turkey)

The study area is situated within the complex structure and karst system of the western Taurids. Basinwide interpretation of the structural features, each of which has great importance, will enlighten many complicated hydrogeologic problems encountered in the area. Thus, considering the previous views on the structural geology of the area, an interpretation of the structural and tectonic features of the study area by means of satellite images was undertaken, and based on the data gained, new approaches were suggested to solve the hydrogeological problems. In particular, determination of the recharge-discharge mechanisms of the Olukköprü and Dumanli karst springs, which are the most important karst groundwater discharge points in the region, has been attempted. Within the framework of this study, a tectonic-lineament map of a large area covering Eirdir, Beyehir, and Sula lakes at the north and the basins to the south of these lakes was prepared.     

Petrology and geochemistry of Jura granite and granite gneiss in the Neelum Valley,Lesser Himalayas (Kashmir,Pakistan)

Late Proterozoic rocks of Tanol Formation in the Lesser Himalayas of Neelum Valley area are largely green schist to amphibolite facies rocks intruded by early Cambrian Jura granite gneiss and Jura granite representing Pan-African orogeny event in the area. These rocks are further intruded by pegmatites of acidic composition, aplites, and dolerite dykes. Based on field observations, texture, and petrographic character, three different categories of granite gneiss (i.e., highly porphyritic, coarse-grained two micas granite gneiss, medium-grained two micas granite gneiss, and leucocratic tourmaline-bearing muscovite granite gneiss), and granites (i.e., highly porphyritic coarse-grained two micas granite, medium-grained two micas granite, and leucocratic tourmaline-bearing coarse-grained muscovite granite) were classified. Thin section studies show that granite gneiss and granite are formed due to fractional crystallization, as revealed by zoning in plagioclase. The Al saturation index indicates that granite gneiss and granite are strongly peraluminous and S-type. Geochemical analysis shows that all granite gneisses are magnesian except one which is ferroan whereas all granites are ferroan except one which is magnesian. The CaO/Na₂O ratio (>0.3) indicates that granitic melt of Jura granite gneiss and granite is pelite-psammite derived peraluminous granitic melt formed due to partial melting of Tanol Formation. The rare earth element (REE) patterns of the Jura granite and Jura granite gneiss indicate that granitic magma of Jura granite and Jura granite gneiss is formed due to partial melting of rocks that are similar in composition to that of upper continental crust.     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Origin and source regions of PM10 in the Eastern Mediterranean atmosphere

A set of daily PM₁₀ (n = 281) samples collected from April 2001 to April 2002 at a rural site (Erdemli), located on the coast of the Eastern Mediterranean, were analyzed applying Mass Closure (MC), absolute principal factor analysis (APFA) and Positive Matrix Factorization (PMF) to determine source contributions. The results from the three techniques were compared to identify the similarities and differences in the sources and source contributions. Source apportionment analysis indicated that PM₁₀ were mainly originated from natural sources (sea salt + crustal ≈ 60%) whilst secondary aerosols and residual oil burning accounted for approximately 20% and 10% of the total PM₁₀ mass, respectively. Calculations for sulfate showed that on average 8% and 12% of its total concentration were originated from sea salt and biogenic emissions, respectively. However, the contribution by biogenic emissions may reach up to a maximum of ~ 40% in the summer. Potential Source Contribution Function (PSCF) analysis for identification of source regions showed that the Saharan desert was the main source area for crustal components. For secondary aerosol components the analysis revealed one source region, (i.e. the south-Eastern Black Sea), whereas for residual oil, Western Europe and the western Balkans areas were found to be the main source regions.     

The total number of spicules on the solar surface and their role in heating and mass balanace in the solar corona

A critical review of determinations of the number of spicules is presented, and the role of both classical and Type 2 spicules in heating and mass balance in the corona is considered. The total number of Type 2 spicules is determined, together with the upward fluxes of energy and mass to which they give rise. The total number of Type 2 spicules on the solar surface is found to be ~10⁵, close to values obtained in other studies. The associated particle flux toward the corona is 2.5 × 10¹⁴ cm^?2 s^?1, an order of magnitude lower than the corresponding flux for classical spicules. The associated energy flux is 10⁴ erg cm^?2 s^?1, an order of magnaitude lower than estimates obtained in other studies. The results indicate that Type 2 spicules can supply the mass lost from the corona, but are not able to fully explain coronal energy losses.     

Optimizing Ore–Waste Dig-Limits as Part of Operational Mine Planning Through Genetic Algorithms

Dig-limit optimization is an operational decision making problem that significantly affects the value of open-pit mining operations. Traditionally, dig-limits have been drawn by hand and can be defined as classifying practical ore and waste boundaries suiting equipment sizes in a bench. In this paper, an optimization approach based on a genetic algorithm (GA) was developed to approximate optimal dig-limits on a bench, given grade control data, equipment constraints, processing, and mining costs. A case study was conducted on a sample disseminated nickel bench, in a two destination and single ore-type deposit. The results from using the GA are compared to hand-drawn results. The study shows that GA-based approach can be effectively used for dig-limit optimization.