排序方式: 共有10条查询结果,搜索用时 13 毫秒
1
1.
Evaluation of spatial and spatiotemporal estimation methods in simulation of precipitation variability patterns 总被引:2,自引:0,他引:2
Bardia Bayat Banafsheh Zahraie Farahnaz Taghavi Mohsen Nasseri 《Theoretical and Applied Climatology》2013,113(3-4):429-444
Identification of spatial and spatiotemporal precipitation variations plays an important role in different hydrological applications such as missing data estimation. In this paper, the results of Bayesian maximum entropy (BME) and ordinary kriging (OK) are compared for modeling spatial and spatiotemporal variations of annual precipitation with and without incorporating elevation variations. The study area of this research is Namak Lake watershed located in the central part of Iran with an area of approximately 90,000 km2. The BME and OK methods have been used to model the spatial and spatiotemporal variations of precipitation in this watershed, and their performances have been evaluated using cross-validation statistics. The results of the case study have shown the superiority of BME over OK in both spatial and spatiotemporal modes. The results have shown that BME estimates are less biased and more accurate than OK. The improvements in the BME estimates are mostly related to incorporating hard and soft data in the estimation process, which resulted in more detailed and reliable results. Estimation error variance for BME results is less than OK estimations in the study area in both spatial and spatiotemporal modes. 相似文献
2.
This paper presents a step-by-step procedure using the three-dimensional boundary element approach to study the behavior of semi-circular canyons under seismic shear waves. The boundary element code TDASC allows utilization for various canyon geometries, evaluation of concurrent seismic waves and calculation of the ground motions on canyons due to an excitation at any arbitrary point of the incident field. Considering the widening ratio of the canyon(including prismatic, semi-prismatic and non-prismatic canyons), wave characteristics(wavelength, dimensionless period, direction) and maximum amplification pattern, the solution was applied to carry out a series of parametric studies. It was shown that canyon form can significantly affect the displacement amplification, especially at the points located on its edges. By increasing the wave dimensionless frequency(η 1), the amplification pattern becomes more complex. On the basis of the results from a variety of considered cases, a new expression has been presented for the limiting wavelength beyond which the widening of the canyon will not have a major effect on the displacement amplification. To verify the reliability of the proposed approach, the obtained results, expressed in terms of displacement amplitude, were compared with those from the available published literature and a reasonably good agreement was observed. 相似文献
3.
Sadeghi Babak Taghavi Farahnaz Akmal Amir Abbas Shayegani 《Geomagnetism and Aeronomy》2019,59(6):770-781
Geomagnetism and Aeronomy - In this study, a hypothesis is proposed about the possible effect of Geomagnetic field (GMF) on the charge structure of a thundercloud based on Lorentz force equation... 相似文献
4.
M. T. Ghaneian A. Bhatnagar M. H. Ehrampoush M. Amrollahi B. Jamshidi M. Dehvari M. Taghavi 《International Journal of Environmental Science and Technology》2017,14(2):331-340
Hexavalent chromium has been proved to be the reason of several health hazards. This study aimed at evaluating the application of pomegranate seeds powder for chromium adsorption (VI) from aqueous solution. Chromium adsorption percentage (VI) increased with increasing the adsorbent dosage. Chromium adsorption capacity (VI), at pH = 2 and 10 mg/L initial metal concentration, decreased from 3.313 to 1.6 mg/g through increasing dosage of adsorbent from 0.2 to 0.6 g/100 ml. The adsorption rate increased through increase in chromium initial concentration (VI). However, there was a removal percentage reduction of chromium (VI). Chromium adsorption kinetics by different models (pseudo-first-order, modified pseudo-first-order, pseudo-second-order, Elovich, intraparticle diffusion, Boyd kinetic) was investigated as well. Studies on adsorption kinetic indicated that the experimental data were matched by pseudo-second-order model (R 2 = 0.999) better. Obtained results demonstrated the pomegranate seeds can be used as an effective biomaterial and biosorbent for hexavalent chromium adsorption from aqueous solutions. 相似文献
5.
Geotectonics - The Kighal and Bormolk porphyry copper deposits (PCDs) are known subeconomic deposits and are ~10 km south of Sungun, the world-class copper mine in NW Iran. The deposits are located... 相似文献
6.
N. Nasseh L. Taghavi B. Barikbin M. Khodadadi 《International Journal of Environmental Science and Technology》2017,14(2):251-262
The discharge of industrial effluents containing hexavalent chromium can be very harmful for the environment. Therefore, Cr(VI) should be removed from contaminated water, and especially from wastewater, to prevent its discharge into the environment. This study is aimed at analyzing the factors that affect the removal of Cr(VI) with the use of almond green hull and ash adsorbent. The effects of pH (2–10), adsorbent dose (2–24 g/L), Cr(VI) concentration (10–100 mg/L), exposure time (1–60 min), and temperature (5–50 °C) were examined. The surface morphology, pore size of adsorbent surfaces were characterized with SEM, EDX, FTIR. Maximum removal occurred at pH = 2. Results showed that the removal yield increased with the rise of exposure time and temperature. The data indicate that due to limited site on adsorbent surface, the removal efficiency decreased as initial Cr(VI) concentration increased. When the adsorbent dose was increased, the removal yield increased in the case of the bioadsorbent as well; however, in the ash adsorbent, there was an increase followed by a decreasing trend. The study highlights that almond green hull can be more efficient than its ash in the removal of Cr(VI) from aqueous solution. As a general result of study, it can be argued that almond green hull bioadsorbent and the obtained carbon are able to remove Cr(VI) from aqueous solutions; thus, they can be used as efficient and economical substitutes for existing adsorbents like activated carbon, for the removal of chromium from polluted aqueous solutions. 相似文献
7.
South-west Asia including the Middle East is one of the most prone regions to dust storm events. In recent years, there was an increase in the occurrence of these environmental and meteorological phenomena. Remote sensing could serve as an applicable method to detect and also characterise these events. In this study, two dust enhancement algorithms were used to investigate the behaviour of dust events using satellite data, compare with numerical model output and other satellite products and finally validate with in-situ measurements. The results show that the use of thermal infrared algorithm enhances dust more accurately. The aerosol optical depth from MODIS and output of a Dust Regional Atmospheric Model (DREAM8b) are applied for comparing the results. Ground-based observations of synoptic stations and sun photometers are used for validating the satellite products. To find the transport direction and the locations of the dust sources and the synoptic situations during these events, model outputs (HYSPLIT and NCEP/NCAR) are presented. Comparing the results with synoptic maps and the model outputs showed that using enhancement algorithms is a more reliable way than any other MODIS products or model outputs to enhance the dust. 相似文献
8.
Mohsen Kamalian Abdollah Sohrabi-Bidar Arash Razmkhah Amirata Taghavi Iraj Rahmani 《Journal of Earth System Science》2008,117(2):783
This paper presents the results of an extensive numerical parametric study on seismic behavior of 2D homogenous hills subjected to vertically propagating incident SV waves. It is shown that the amplification potential of these hills is strongly influenced by the wavelength, by the shape ratio, by the shape of the hill and in a less order of importance, by the Poisson ratio of the media. The 2D topography effect could be ignored, only if the hill has a shape ratio of less than 0.1 or if it is subjected to incident waves with predominant dimensionless periods of greater than 13 times the shape ratio. In incidence of waves with wavelengths longer than the width of the hill, the amplification curve usually finds its maximum at the crest and decreases towards the base of the hill. Else, some de-amplification zones would occur along the hill. Among hills with similar shape ratios, those with intermediate cross section areas show intermediate seismic behavior, too. Estimated seismic site coefficients for the crest of a 2D rocky hill depend on its shape ratio and could reach even 1.7, which encourages one to classify it according to standard site categorization procedures as soil profile types SC or SD instead of the conventional SB type. 相似文献
9.
Chatrayi Hosein Hajizadeh Farnusch Taghavi Behnam 《Geotechnical and Geological Engineering》2021,39(7):5279-5289
Geotechnical and Geological Engineering - Seismic features of the site are studied in earthquake prone areas. In these studies, the seismic design parameters of the site are determined based on... 相似文献
10.
Movahed Zohreh Radzuan Junin Hassan Amiri Bakhtiary Shahram Taghavi Poor Ruhangiz Mohamadian Ali Asghar Movahed 《Arabian Journal of Geosciences》2016,9(3):225
Core samples are still today considered as the standard measurement against all other measurements which must be compared. Core analysis usually focuses on the worse portion of the reservoir due to the fact that core recovery has rarely been well in a highly fractured zone; hence, permeability measured from core sample is often not representative. Core analysis is a common method to identify small-scale fractures of the well and permeability and porosity; however, there are some limitations in the core procedure such as it is highly expensive and unidirectional and has a low recovery coefficient in fractured zone. In contrast, there tends to be a mistrust and even a suspicion of those logging instruments that make measurements which threaten to replicate or even replace the “sacred core.” Thus, image logs are more useful to study the subsurface fractures in these such cases and the logs which come closest to achieving this are the high-resolution micro resistivity (OBMI) and acoustic geological imaging (UBI). The core and OBMI-UBI result was matched in order to verify the log measurements. Furthermore, FMI data were integrated with other open-hole logs to derive a permeability curve. As demonstrated in the case studies, it is believed that the permeability in the basement could be reasonably evaluated using this method. As a result, this exercise has proven to be very valuable, not only for demonstrating the value of the log data, but also it has also highlighted some significant limitations of the core in water-based mud and oil-based mud systems. 相似文献
1