Recent volcanism in Masaya-Granada Area,Nicaragua

Masaya-Granada area is located in the middle part of the Central American volcanic zone. A basaltic shield volcano with a caldera, an acidic pyroclastic flow plateau with a caldera, cinder cones, maars, a lava dome and a composite andesitic volcano were formed by recent volcanic activities. Magmas of basic and intermediate ejecta are supposed to be formed by partial melting of the upper mantle material. Most of basalts and andesites was derived from common parental magma after crystallization differentiation history, but some basalts, which have extremely high MgO content and low K₂O content might be derived from primary magma of different type. There is no evidence to deny the possibility of differentiation product of acidic rock from basic magma, but compositional gap on variation diagram suggest the possibility of partial melting origin. Strike-slip fault systems might have been formed in association with plate movement, and fluidal basaltic magma was erupted also along these fault zones.     

1974 activity of chokai volcano,Japan

Shallow intrusion of magma caused phreatic explosions and mud flows at the snow-covered summit of Chokai volcano, northeast Honshu, Japan, after 153 years of dormancy. Total heat emission by the eruption is estimated at more than 3.0 × 10²¹ erg. Equivalent amount of magma is about 2.2 × 10⁸ ton. Focal mechanisms of the associated volcanic earthquakes, which had been variable during the period of eruption. became stable after the cessation of the surface activity with pressure axis in a NW direction which is also the strike of the epicenter distribution. This temporal change of focal mechanisms may be interpreted as the result of propagation of increased pore pressure in the direction of the maximum pressure in the post eruptive period. The magmatic pressure which certainly predominated during the eruption period and caused carthquakes with variable mechanisms, decreased through surface activity.     

Relationship between chemical composition of Japanese Island-Arc volcanic rocks and gravimetric data

1670 published chemical analyses from 137 Quaternary eruption centers of Kurile, Japan and Izu—Mariana arcs are collected and K₅₅ and K₆₀ values of individual centers are calculated. Along with the well-established trend of increase of K₅₅ and K₆₀ values across the arc towards the continent, longitudinal change is also recognizable. Interrelation between K₅₅ or K₆₀ value pattern and a map of Bouguer anomaly distribution along the volcanic front is characteristic.To develop one possible simplified model to explain the facts, we assume first that the asthenosphere has a homogeneous thermal state beneath the volcanic zone, second that the thickness of the crust is quite variable areally, and third that the mean density of the crust is constant throughout the area. Thus, the composition of the magma generated along a zone corresponding to equal depths along the Benioff zone should be identical throughout the volcanic arc, and lower values of the Bouguer anomaly should be observed where the crust is thicker. We then assume that magma generated in the asthenosphere ascends into the crust, then cools as fractional crystallization proceeds. Depths of fractional crystallization would be deeper where the crust is thicker. The ratio of the clinopyroxene phase separated from the magma to the plagioclase phase should be larger where the level of fractionation is deeper. Thus, magmatic liquid should be enriched in K where K-poor crystal fractions are subtracted at the deeper level.     

Volcanic hazards from Bezymianny- and Bandai-type eruptions

Major slope failures are a significant degradational process at volcanoes. Slope failures and associated explosive eruptions have resulted in more than 20 000 fatalities in the past 400 years; the historic record provides evidence for at least six of these events in the past century. Several historic debris avalanches exceed 1 km³ in volume. Holocene avalanches an order of magnitude larger have traveled 50–100 km from the source volcano and affected areas of 500–1500 km². Historic eruptions associated with major slope failures include those with a magmatic component (Bezymianny type) and those solely phreatic (Bandai type). The associated gravitational failures remove major segments of the volcanoes, creating massive horseshoe-shaped depressions commonly of caldera size. The paroxysmal phase of a Bezymianny-type eruption may include powerful lateral explosions and pumiceous pyroclastic flows; it is often followed by construction of lava dome or pyroclastic cone in the new crater. Bandai-type eruptions begin and end with the paroxysmal phase, during which slope failure removes a portion of the edifice. Massive volcanic landslides can also occur without related explosive eruptions, as at the Unzen volcano in 1792.The main potential hazards from these events derive from lateral blasts, the debris avalanche itself, and avalanche-induced tsunamis. Lateral blasts produced by sudden decompression of hydrothermal and/or magmatic systems can devastate areas in excess of 500km² at velocities exceeding 100 m s^–1. The ratio of area covered to distance traveled for the Mount St. Helens and Bezymianny lateral blasts exceeds that of many pyroclastic flows or surges of comparable volume. The potential for large-scale lateral blasts is likely related to the location of magma at the time of slope failure and appears highest when magma has intruded into the upper edifice, as at Mount St. Helens and Bezymianny.Debris avalanches can move faster than 100 ms^–1 and travel tens of kilometers. When not confined by valley walls, avalanches can affect wide areas beyond the volcano's flanks. Tsunamis from debris avalanches at coastal volcanoes have caused more fatalities than have the landslides themselves or associated eruptions. The probable travel distance (L) of avalanches can be estimated by considering the potential vertical drop (H). Data from a catalog of around 200 debris avalanches indicates that the H/L rations for avalanches with volumes of 0.1–1 km³ average 0.13 and range 0.09–0.18; for avalanches exceeding 1 km³, H/L ratios average 0.09 and range 0.5–0.13.Large-scale deformation of the volcanic edefice and intense local seismicity precede many slope failures and can indicate the likely failure direction and orientation of potential lateral blasts. The nature and duration of precursory activity vary widely, and the timing of slope faliure greatly affects the type of associated eruption. Bandai-type eruptions are particularly difficult to anticipate because they typically climax suddenly without precursory eruptions and may be preceded by only short periods of seismicity.     

Volcanic dry avalanche deposits — Identification and comparison with nonvolcanic debris stream deposits

A “volcanic dry avalanche deposit” is defined as a volcaniclastic deposit formed as a result of a large-scale sector collapse of a volcanic cone associated with some form of volcanic activity. Avalanche transport occurred in response to the gravitational field, in a manner similar to the transport of nonvolcanic debris streams (e.g. Hsü, 1975). Such deposits are characterized by megablock structure — deformed and fractured large blocks up to several hundreds meters in diameter. A megablock preserves original layering, intrusive contacts or weathered surfaces of the source volcanic edifice. Surface topography of the deposit is characterised with hummocky relief. Ratios of fell height to travel distance for volcanic dry avalanche deposits are between 0.18 and 0.06. This range is similar but smaller than the value of 0.58 to 0.08 for nonvolcanic debris stream deposit. This similarity suggests similar transportation mechanisms. Excessive travel distances as defined by Hsü (1975), calculated for volcanic dry avalanche deposits, give values larger than for debris stream deposits of the same volume. The difference is explained by lower rigidity of the collapsing mass due to the existence of soft pyroclastic layers, alteration around the vent, development of fractures owing to new cryptodome intrusion, and boiling of supercritical fluid contained within the collapsed mass.     

Internal structural variations in a debris-avalanche deposit from ancestral Mount Shasta,California, USA

Various parameters of the internal structure of a debris-avalanche deposit from ancestral Mount Shasta (size and percentage of block facies in each exposure, number and width of jigsaw cracks, and number of rounded clasts in matrix facies) were measured in order to study flow and emplacement mechanisms. Three types of coherent blocks were identified: blocks of massive or brecciated lava flows or domes, blocks of layered volcaniclastic deposits, and blocks of accidental material, typically from sedimentary units underlying Shasta Valley. The mean maximum dimension of the three largest blocks of layered volcaniclastic material is 220 m, and that of the lava blocks, 110 m. This difference may reflect plastic deformation of blocks of layered volcaniclastic material; blocks of massive or brecciated volcanic rock deformated brittly and may have split into several smaller blocks. The blocks in the deposit are one order of magnitude larger, and the height of collapse 1100 m higher, than the Pungarehu debris-avalanche deposit at Mount Egmont, New Zealand, although the degree of fracturing is about the same.This suggests either that the Shasta source material was less broken, or that the intensity of any accompanying explosion was smaller at ancestral Mount Shasta. The Shasta debris-avalanche deposit covered the floor of a closed basin; the flanks of the basin may have retarded the opening of jigsaw cracks and the formation of stretched and deformed blocks such as those of the Pungarehu debris-avalanche deposit.     

Depositional ramps: asymmetrical distribution structure in the Ata pyroclastic flow deposit,Japan

The asymmetrical distribution of the welded Ata large-scale pyroclastic flow deposit in Southern Kyushu, Japan was identified. This distribution pattern was defined as depositional ramps. Depositional ramps can be identified in valleys wider than 1 km and become smaller-scale with increasing distance from the source. Upslope directions of depositional ramps are generally radially away from the source caldera, suggesting that the structure was formed by the flow of pyroclastic material radially away from the source. The original depositional surface was reconstructed based on field mapping and density measurements of the pyroclastic flow deposit. Depositional ramps having a dip angle of more than 9° were reconstructed on the vent-facing slopes of the topography underlying the valley-filling deposits in the area within 10 km of the caldera rim. Such a dip angle is much larger than previously described dip angles. The size and gradient of the depositional ramps decreases with increasing distance from the source. Depositional ramps are recognized commonly in densely welded pyroclastic flow deposits. A high emplacement temperature is required to form the depositional ramps. This suggests that the pyroclastic flow was transported as a dense, fluidized layer to minimize heat loss.     

Factors governing the flow lineation of a large-scale pyroclastic flow — An example in the ata pyroclastic flow deposit,Japan

Schmincke andSwanson (1967) explained laminar flowage structures as indicators for flow direction of pyroclastic flows that show a radial flow pattern away from the source. Several other authors have reported similar examples, but the influence of pre-flow topographic relief has not been analyzed. Flow lineations were measured for the Ata pyroclastic flow deposit, southwestern Japan. This deposit has covered an undulating basement topography. Preferred orientation of crystals and lithic fragments were measured on thin sections cut parallel to sedimentary layering. The following three factors which control the flow lineation have been recognized. 1) Flow lineations oriented radially away from the source, as described by previous authors, were obtained only for samples collected from the surface of the pyroclastic flow plateau where the basement valleys were nearly filled by earlier flow units. 2) Lineations near the floor of narrow valleys were parallel to the strike of the valley. 3) Flow lineations near the wall of valleys tend to be parallel to the dip of the valley walls. These data suggest that the initial radial movement of pyroclastic flows from the source gradually changes direction to parallel the strike of deep valleys due to confining effect of valley wall. Flows which are trapped within a valley, tends to move towards the bottom of the valley just prior to the final settlement. After the basement topographic relief has been filled up with earlier flow units, the later flows maintain their original radial movement until final settlement.