Ridge development as revealed by sub-bottom profiles on the central New Jersey shelf

Closely-spaced 3.5 kHz seismic profiles were collected over the north-easterly trending ridge and swale system 50 km east-southeast of Atlantic City, New Jersey. They yield information on the Late Quaternary depositional history of the area, and on the origin of the ridge system. Four of the sub-bottom reflectors identified were sufficiently persistent to warrant investigation and interpretation. These reflectors, which have been cored, lithologically identified, and radiocarbon dated, are stratigraphically higher than the reflectors dealt with by the majority of previous studies. The upper three reflectors are definitely mid- and post-Wisconsin in age and present a record of the most recent glacial cycle. The upper three units associated with the observed reflectors appear to exert a pronounced influence on the bathymetry. The gently corrugated ridge system of Holocene sand is formed over the regionally flat-lying upper unit, an Early Holocene lagoonal silty clay. The characteristically flat, broad depressions of the area are floored by this lagoonal material. Locally, however, marine scour has cut through the silty clay into an underlying unit of unconsolidated fine Pleistocene sand. Several stages of trough development appear to be represented. After penetrating the lagoonal clay, troughs are initially narrow, but when incised through the sand into a lower, Pleistocene, silty-clay unit, the troughs become notably wider. As downcutting is inhibited by the lower clay, the upper clay is undercut as the trough widens in a fashion similar to a desert blowout.

The sub-bottom reflectors indicate that ridge development on the central shelf has involved aggradation as well as erosion. Some ridges seem to have grown by vertical and lateral accretion from small cores. The internal structure of other ridges suggests that they formed by the coalescence of several small ridges. Others appear to have undergone appreciable lateral migration.

The ridges appear to be in a state of continuing adjustment to the hydraulic regime of the deepening post-Pleistocene water column.     

Sand ridges on the inner Atlantic shelf of North America: Morphometric comparisons with Huthnance stability model

Sand ridge fields on the inner shelf of the Middle Atlantic Bight are generally thought to have formed in response to northeasterly storm flows as the shoreface underwent erosional retreat with postglacial sea-level rise. However, the hydrodynamic mechanism is poorly unerstood. Coastal boundary models see the ridges as responses of the seafloor to distortions in the flow induced by the coastal boundary. Stability models propose that an irregular initial topography will evolve toward an ordered array of bedforms in response to repeated flow events. The two classes of models are not mutually exclusive, nor are members within each class mutually exclusive. Results of measurements of ridge spacing on the inner Atlantic shelf of North America agree with the predictions of stability models.     

含矿流体混合反应与成矿作用的动力平衡模拟研究

本文在约定热液体系中成矿元素成矿速率(成矿过程中单位时间内单位体积所合成矿元素重量的变化)的基础上。借助于物质-热-化学-成矿四重全耦合的研究思路，构建了均匀热液体系、层状热液体系、岩浆侵入热液体系下成矿元素的迁移、富集、溶解与沉淀作用数值模型。模拟结果表明；(1)硫化物(H2S)和硫酸盐(SO42-)流体的混合反应是成矿热液体系中铅、锌、铁成矿元素成矿的重要控制因素；(2)均匀介质、岩浆侵入或地质构造的存在，对成矿元素在成矿流体运移的速度、流线、温度分布和成矿元素的溶解与沉淀分布都有着各自的特征．不同的成矿环境或成矿背景制约了成矿元素的迁移与富集以及矿体的产出定位。暗示成矿环境及成矿速率对热液体系中成矿元素的沉淀与溶解具重要作用；成矿流体的混合反应是成矿作用发生的重要机制之一。在成矿理论研究中必须充分考虑不同地质构造因素的约束。     

MARS:A TUTORIAL

This tutorial paper presents a simplified view of one of the more recently published multivariatecalibration methods particularly suited to dealing with non-linear data sets.The method is referred toas MARS and stands for multivariate adaptive regression splines.Simple examples are provided toexplain the workings of the method.     

Evolution of the Mesozoic Granites in the Xiong''ershan-Waifangshan Region,Western Henan Province,China,and Its Tectonic Implications

Based on the new data of isotopic ages and geochemical analyses, three types of Mesozoic granites have been identified for the Xiong'ershan-Waifangshan region in western Henan Province: high-Ba-SrⅠ-type granite emplaced in the early stage (～160 Ma),Ⅰ-type granite in the middle stage (～130 Ma) and anorogenic A-type granite in the late stage (～115 Ma). Geochemical characteristics of the high-Ba-SrⅠ-type granite suggest that it may have been generated from the thickened lower crust by partial melting with primary residues of amphibole and garnet. Gradual increase of negative Eu anomaly and Sr content variations reflect progressive shallowing of the source regions of these granites from the early to late stage. New 40Ar/39Ar plateau ages of the early-stage Wuzhangshan granite (156.0±1.1 Ma, amphibole) and middle-stage Heyu granite (131.8±0.7 Ma, biotite) are indistinguishable from their SHRIMP U-Pb ages previous published, indicating a rapid uplift and erosion in this region. The representative anorogenic A-type granite, Taishanmiao pluton, was emplaced at～115 Ma. The evolution of the granites in this region reveals a tectonic regime change from post-collisional to anorogenic between～160 Ma and～115 Ma. The genesis of the early- and middle-stageⅠ-type granites could be linked to delamination of subducted lithosphere of the Qiniing orogenic belt, while the late-stage A-type granites represent the onset of extension and the end of orogenic process. In fact, along the Qiniing -Dabie-Sulu belt, the Mesozoic granitoids in western Henan, Dabieshan and Jiaodong regions are comparable on the basis of these temporal evolutionary stages and their initial 87Sr/86Sr ratios, which may suggest a similar geodynamic process related to the collision between the North China and Yangtze cratons.     

岩浆成矿体系的热演化和剥露史的数字模拟

通过对岩浆冷却过程的数字模拟研究,揭示出岩浆在冷却成矿过程中的温度分布和变化规律及影响因素．在此基础上,进一步应用高精度的温龄计组合来限定岩浆成矿体系的热演化和剥露历史,精确地计算出岩浆的初始侵位时间和深度、矿物结晶时间、冷却速率、冷却和暴露地表时间,以及剥露和剥蚀速率等重要参数,并将模拟结果应用于斑岩铜矿床的成矿研究中．研究表明,将精确的年龄测试手段与计算机模拟技术相结合,可为定量研究岩浆矿床的热演化和剥露史、深入了解矿床的成因机制提供一种有效方法．     

Fast and dynamic generation of linear octrees for geological bodies under hardware acceleration

In the application of 3D Geoscience Modeling,we often need to generate the volumetric representations of geological bodies from their surface representations.Linear octree,as an efficient and easily operated volumetric model,is widely used in 3D Geoscience Modeling.This paper proposes an algorithm for fast and dynamic generation of linear octrees of geological bodies from their surface models under hardware acceleration.The Z-buffers are used to determine the attributes of octants and voxels in a fast way,a...     

Anthropogenic Sulfate and Nitrate Signals in Snow from Bogda Glacier, Eastern Tianshan

A 1.2 m snow pit was recovered on July 29th, 2009 from the Bogda Glacier, eastern Tianshan (天山). The sample site temperature of -9.6 ℃ indicates that the unique glaciochemical re-cord was well preserved and suitable for the reconstruction of air pollution levels in this previously un-explored region. Samples were analyzed for major ions (Na+, K+, Ca2+, Mg2+, NH4+, Cl-, SO42-, NO3-, HCOO-, and CH3COO-). NO3- and SO42- were characterized by significant high levels of pollution con-centration. Most air masses ...     

Chemostratigraphy of Flood Basalts in the Garze-Litang Region and Zongza Block: Implications for Western Extension of the Emeishan Large Igneous Province, SW China

The Late Permian Emeishan Large Igneous Province (ELIP) is commonly regarded as being located in the western part of the Yangtze craton, SW China, with an asymmetrical shape and a small area. This area, however, is just a maximum estimation because some parts of the ELIP were not recognized or dismembered and destroyed during the Triassic to Cenozoic tectonism. In this paper, the chemostratigraphical data of the Zongza block, the Garze-Litang belt and the Songpan-Garze block suggest that the Late Permian basalts in these areas have remarkable similarities to the ELIP basalts in petrography and geochemistry. Flood basalts in the Sanjiangkou area are composed of the lower part of the low-Ti (LT) tholeiite and the upper part of the high-Ti (HT) tholeiite, which is the same as the flood basalts on the western margin of the Yangtze craton. Flood basalts in the Zongza and Songpan-Garze areas, which are far from the Yangtze craton, consist of HT tholeiite only. This is the same as the flood basalts within the Y     

三维激光探测系统在采空区测量中的误差分析与校正

利用三维空区探测系统(CMS)采集矿山地下三维数据,不但可以精确获取空区的空间几何参数,如长度、面积、体积、围岩及顶板的变形和变化关系,还可以大大提高空区数据采集的安全性和效率,为空区安全评价与治理以及矿柱回采设计提供数据。三维激光探测技术作为一项高新技术应用于矿山,其使用方法有一定的特殊性。为了提高扫描数据的精度及可靠性,在系统地介绍三维激光探测系统测量误差的基础上,详细分析CMS在空区扫描测量中影响最大的系统误差---侧滚向误差、仰俯向误差及定向误差,并提出相应的校正方法。