Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示

综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。     

The water level simulation for crane habitat optimization in Xianghai Nature Reserve

The probability of crane living in reedy wetlands can reach 100%, at the same time, the area of reed, the water level and adjacent water area are main factors which control the crane's habitat selection. We all know that all these factors are spatially heterogeneous. For the Xianghai wetland safety and to protect the Xianghai wetland habitat of crane, this paper has mainly identified a solution to these problems. The wetland information is extracted from the TM images, which reflect the whole wetland landscape and are very important for both quantitative analysis of remote sensing observation of the earth system and positioning analysis in GIS database that is automatically extracted from DEM. The DEM for Xianghai characteristics of topography is created. On the basis of the GRID SUBMODULE, applying the GIS spatial overlay analysis, the relationship between the water level and the reed area below the water level and the rating distribution maps of reed area above water level is established. When the water level reaches the altitude of 165 m, the reed area, 981.2 ha is maximum, i.e., the water level of 165 m is the optimal.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.     

长江三峡库区梯田稳定性分析与对策*──以鄂西秭归县为例

三峡库区历史上就是滑坡、崩塌作用强烈的地带,在调查分析秭归县滑坡、崩塌对梯田稳定性的影响的基础上,探讨了四种不稳定梯田培坎的特征、性质和现状,提出了利用优势植物固土护坎等相应的对策。     

湖北蕲春花岗岩类锆石SHRIMP年龄：大别山造山带内弱变质—未变质晋宁期花岗岩类的发现

蕲春花岗质杂岩体包括斑状二长花岗岩和花岗岩两部分,它们之间在化学性质上存在着很大的差异,前者表现为高Al 2O3(15.73%)、相对高CaO(2.46%)、Na2O含量明显高于K2O(Na2O/K2O=1.27),尤以强烈亏损重稀土元素和极强的轻、重稀土元素分馏程度[(La/Yb)N=46.8]为特征而类似于太古宙高Al2O3的TTG岩石.而后者则以较低的Al2O3含量(14.05%)、贫CaO(0.82%)、K2O含量明显高于Na2O(Na2O/K2O=0.81)为特征,轻、重稀土元素的分馏程度[(La/Yb)N=10.89]也较片麻状二长花岗岩中弱得多.两类岩石中锆石的U-PbSHRIMP年龄分别为824.6±17.6 Ma和784±20 Ma,该时代与大别山造山带内花岗片麻岩的原岩形成年龄类似.大别山造山带内弱变质-未变质晋宁期花岗岩的出现表明扬子板块印支期向北俯冲时,该花岗质杂岩处于俯冲板片的后缘,可代表造山带内扬子基底的原地露头.而岩体周围的高压变质杂岩应是折返上来的无根构造岩片,大别山造山带内高压超高压变质杂岩的出露不是整体性抬升剥蚀的结果.     

Crustal structure of the southern Dabie ultrahigh-pressure orogen and Yangtze foreland from deep seismic reflection profiling

A new 140‐km‐long seismic reflection profile provides a high‐resolution crustal‐scale image of the southern Dabieshan high‐pressure (HP) metamorphic belt and the Yangtze foreland fold‐and‐thrust belt. The seismic image of the stacked section shows that the southern Dabieshan metamorphic terrane and Yangtze foreland belt are separated by a large north‐dipping fault. In the foreland the upper crust is dominated by a series of folds and thrusts formed during the collisional stage in the mid‐Triassic; it was reworked by crustal extension resulting in the formation of a late Jurassic and Cretaceous red‐bed basin. The southern Dabieshan profile shows stacked crustal slabs developed along the margin of the collisional orogenic belt. The Moho reflectors at 10–11 s (～30–33 km) are seismically prominent and segmented by a number of south‐verging thrusts that were probably developed by foreland‐directed thrusting of the deeply subducted continental crust during exhumation. The seismic reflection profile suggests that structures related to the Triassic–Jurassic subduction and exhumation of the Yangtze plate are preserved despite the severe crustal extension superimposed during the late Mesozoic and Cenozoic.     

Spatial variability and pattern analysis of soil properties in Dehui city, Jilin province

1IntroductionSoil nutrient, as the synthetic results under the influence of various anthropogenic activities and the factors such as climate and topography, etc., possesses certain spatial distribution characteristics, and certain structural and stochastic characteristics. The study of the differences existing in different parts of the region lays the foundation for adjusting all management measures and all material input capacities and for gaining the maximal economic benefit. Presently, the …     

Geochemical characteristics of the metapelites from the Xingxingxia group in the Eastern Segment of the Central Tianshan: Implications for the provenance and paleoweathering

Clastic sedimentary rocks record a number of in-formation about the compositions and paleoweathering conditions of the source areas, and the tectonic setting of the depositional basin[1―6]. The traditionallypetrological study commonly utilizes the major com-ponents (Quartz, Feldspar and Lithics) of the silici-clastic sedimentary rocks to investigate the source rock composition and tectonic setting[7]. However, thepetrological method is somewhat limited, because many of the mafic components f…