Variations in turbulent energy dissipation and water column stratification at the entrance of a tidally energetic strait

We observed tidal currents, turbulent energy dissipation and water column stratification at the entrance of a narrow strait (Neko Seto) in the Seto Inland Sea, Japan, using a free-falling turbulent microstructure profiler (TurboMAP) and acoustic Doppler current profiler (ADCP). The variation in turbulent energy dissipation at the entrance of the strait was not at quarter-diurnal frequency but at semi-diurnal frequency; turbulent energy dissipation was enhanced during the ebb tide, although it was moderate during the flood tide. This result is consistent with the results of Takasugi (1993), which showed the asymmetry of tidal energy loss during a semidiurnal tidal cycle using control volume analysis. It is suggested that significant turbulent energy dissipation is generated in the strait, which influences the properties of water outside the strait when tidal currents flow out from the strait.     

Interface wave generated by an electromagnetic induction source

Interface waves such as the Scholte wave are a useful tool to study geoacoustic properties and can be conventionally generated by an explosive or a pneumatic source on/above the seafloor. This type of source, however, generates strong compressional waves in the water and sediment at the same time; these waves then disturb an observation of interface waves and leads to difficulty in processing. These sources are also relatively hard to control at sea from a viewpoint of repeatability and stability of interface waves to be generated. In addition, environmental problems caused by those sources is a concern. In this paper, an electromagnetic induction source whose vibrator plate hits the seafloor directly and excites interface waves is described. The capability of this source was evaluated both in a water tank and at seashore. The pulsed Scholte waves excited both by several types of electromagnetic induction source having a different shape of vibrator plate and by dropping weight were transmitted in sediment and received using geophones. As a result of comparison of measured signals, the pulse signal propagating from the source demonstrates a sharper rise time than that from dropping weight     

Influences of the snow cover on landslide displacement in winter period: a case study in a heavy snowfall area of Japan

The displacement of a relatively small reactivated landslide in a snowy area in Japan was monitored over a long period. The displacement rate of the landslide, which was approximately of 20 mm d^?1 before the formation of snow cover, decelerated drastically during the continuous snow cover period every winter period. Possible causes included reduction in the amount of water that reached the ground surface (MR: meltwater and/or rainwater) and increase in snow load. Given that the actual displacement of the landslide was far below the predicted value based on the relationship between landslide displacement and MR immediately before the continuous snow cover period, the deceleration of landslide displacement was more likely attributable to the increase in snow load than to the reduction in MR. An investigation of the link between snow load and landslide displacement showed a negative logarithmic relationship. A dynamic analysis based on the limit equilibrium method showed that snow load increases the effective normal stress and the stability of a landslide in which the mean inclination angle of the slip surface is smaller than the internal friction angle. The stability of the actual slope was also analyzed by conducting soil tests on samples collected at the site and using the resultant parameters. The analysis also showed that the increase in snow load increases the safety factor and reduces the landslide displacement. The displacement of a relatively small landslide that has a shallow slip surface was found to be greatly influenced by snow cover.     

A study of the morphology of winter sprites in the Hokuriku area of Japan in relation to cloud charge height

Continuous observations of sprites in the Hokuriku area of Japan were performed from two optical sites during the three winter periods. The purpose of this observation is to study the major effect in the appearance of sprites and in determining the morphology of sprites (columns or carrots). Detailed analysis is performed based on the estimation of the height of ?10 °C at the time of sprite occurrence. When the height of ?10 °C is lower than 1800 m, the occurrence of sprites is infrequent, and the dominant shape is column. Then when it is increased (1800–3000 m), a new situation takes place, namely the occurrence of sprites is very enhanced and more spectacular shapes like carrots tend to be frequently observed in addition to column sprites. These sprite characteristics are first compared with those of parent lightning in the Hokuriku area and with our latest computer simulations on sprite initiation.     

Three-dimensional EM computer simulation on sprite initiation above a horizontal lightning discharge

The purpose of this paper is to study the three-dimensional (3D) effects of the source current and the electromagnetic (EM) pulse on the distribution of upper atmospheric electric field and ionization created. A new lightning model has been employed; i.e., we have included a horizontal channel in addition to the conventional vertical channel. The effects of the horizontal lightning channel are summarized as follows: (1) the effect of a vertical channel plays a fundamental role in the whole view of sprite initiation; (2) the position of a sprite is shifted from the position of its parent vertical channel in response to the length of a horizontal channel; and (3) we observe very fine structures with local maxima and minima in the “reduced” electric field (the electric field divided by the neutral gas density). These theoretical inferences are discussed and compared with the observational facts so far reported (such as lateral shift of sprites, morphological difference of sprites, etc.).     

Simulation of near source ground motion and its characteristics

It is fact that the severe ground motions of shear waves have a strong effect on the dynamic behavior of buildings and civil structures. We simulate near source strong motions of a pure shear wave and synthesize small motions, using the parameters based on the recorded accelerograms at the site that is regarded as a base rock in the Osaka basin, Japan. By making use of a stochastic technique, we can easily introduce higher frequency contents in the motions and apply the technique to the synthesis of small waves regarding as a green function. We also introduce to the analysis the useful relationships among the time duration T_d, the seismic moment M₀, the corner frequency f_c and the high cutoff frequency f_max which were regressed by a simple representation scheme. Considering two active faults that may affect severe damage on buildings and civil structures, we try to predict strong ground motions in Osaka basin and show the characteristics of them.     

Collision structure in the upper crust beneath the southwestern foot of the Hidaka Mountains, Hokkaido, Japan as derived from explosion seismic observations

The P-wave velocity structure of the upper crust beneath a profile ranging from Niikappu to Samani in the southwestern foot of the Hidaka Mountains, Hokkaido, Japan was obtained through analysis of refraction and wide-angle reflection data. The mountains are characterized by high seismicity and a large gravity anomaly. The present profile crosses the source region of the 1982 Urakawa-oki earthquake (M_s 6.8). The length of the profile is 66 km striking northwest and southeast. Along the profile, 64 vertical geophones were set up and 5 shot points were chosen. For each shot, a 400–600 kg charge of dynamite was detonated. The studied area is composed of four major geological belts: Neogene sedimentary rocks, the Kamuikotan belt, the Yezo Group, and the Hidaka belt. The measurement line crosses these geological trend at an oblique angle. The structure obtained is characterized by remarkable velocity variations in the lateral direction and reflects the surface geological characteristics. A thin, high-velocity layer (HVL) was found between low-velocity materials in the central part of the profile, beneath the Kamuikotan Metamorphic Belt, at a depth ranging from 0.5 to 6 km, overthrusting toward the west on the low-velocity materials consisting of Neogene sedimentary rocks, and forming gentle folds. Outlines of the velocity structure of the Hidaka Mountains yielded by other studies have shown a large-scale overthrust structure associated with the collision of the Outer Kurile and the Outer Northern Honshu Arcs. The shallow velocity structure inferred by the present study showed a similar (although small scale) overthrust structure. The obtained structure shows that the composite tectonic force, comprising westward movement of the Outer Kurile Arc and northward movement of the Outer Northern Honshu Arc, plays an important role in the evolution of the tectonic features of the crust and upper mantle in a wide depth range beneath the Hidaka Mountains.     

三维散射系数结构揭示的龙滩库区水的渗透特征

使用2006年10月1日至2010年5月14日9个固定台站和2009年4月4日至2010年5月14日15个临时台站记录的地震波形资料,采用尾波包络线反演方法,得到了龙滩库区地壳的三维散射系数结构,结果表明:(1)龙滩水库下方地壳中存在明显的非均匀结构.由大坝附近布柳河与红水河交汇处至三江(红水河、油拉河和牛河)交汇处的河段下方是研究区最明显的高散射系数区,高散射系数延伸深度达10 km,但在8 km以下高散射系数范围明显减小,除此之外,八茂断裂东西两端和八腊断裂周围也存在小范围的高散射系数区.(2)龙滩库区高散射系数主要分布在碳酸盐地层及与之接壤的透水性较好的砂页岩中,并且主要位于主干河流附近,河流和断层交汇处附近及与河流相交的断层附近,高散射系数分布与水的渗透密切相关.库区的水向河流两岸的渗透宽度约为10 km左右,深度不超过10 km.(3)龙滩库区地震主要集中在7~10 km深度的高散射系数区内,在水库地震中震源明显偏深,可能与库区水渗透引起的古岩溶水活化有关.     

Characterization of Stress Drops on Asperities Estimated from the Heterogeneous Kinematic Slip Model for Strong Motion Prediction for Inland Crustal Earthquakes in Japan

Dense strong motion observation networks provided us with valuable data for studying strong motion generation from large earthquakes. From kinematic waveform inversion of seismic data, the slip distribution on the fault surface of large earthquakes is known to be spatially heterogeneous. Because heterogeneities in the slip and stress drop distributions control the generation of near-source ground motion, it is important to characterize these heterogeneities for past earthquakes in constructing a source model for reliable prediction of strong ground motion. The stress changes during large earthquakes on the faults recently occurring in Japan are estimated from the detailed slip models obtained by the kinematic waveform inversion. The stress drops on and off asperities are summarized on the basis of the stress change distributions obtained here. In this paper, we define the asperity to be a rectangular area whose slip is 1.5 or more times larger than the average slip over the fault according to the previous study for inland crustal earthquakes. The average static stress drops on the asperities of the earthquakes studied here are in the range 6?C23?MPa, whereas those off the asperities are below 3?MPa. We compiled the stress drop on the asperities together with a data set from previous studies of other inland earthquakes in Japan and elsewhere. The static stress drop on the asperity depends on its depth, and we obtained an empirical relationship between the static stress drop and the asperity??s depth. Moreover, surface-breaking asperities seemed to have smaller stress drops than buried asperities. Simple ground motion simulations using the characterized asperity source models reveal that deep asperities generate larger ground motion than shallow asperities, because of the different stress drops of the asperities. These characteristics can be used for advanced source modeling in strong ground motion prediction for inland crustal earthquakes.