Thermal metamorphism of the Arunachal Himalaya, India: Raman thermometry and thermochronological constraints on the tectono-thermal evolution

Determination of the peak thermal condition is vital in order to understand tectono-thermal evolution of the Himalayan belt. The Lesser Himalayan Sequence (LHS) in the Western Arunachal Pradesh, being rich in carbonaceous material (CM), facilitates the determination of peak metamorphic temperature based on Raman spectroscopy of carbonaceous material (RSCM). In this study, we have used RSCM method of Beyssac et al. (J Metamorph Geol 20:859–871, 2002a) and Rahl et al. (Earth Planet Sci Lett 240:339–354, 2005) to estimate the thermal history of LHS and Siwalik foreland from the western Arunachal Pradesh. The study indicates that the temperature of 700–800 °C in the Greater Himalayan Sequence (GHS) decreases to 650–700 °C in the main central thrust zone (MCTZ) and decreases further to <200 °C in the Mio-Pliocene sequence of Siwaliks. The work demonstrates greater reliability of Rahl et al.’s (Earth Planet Sci Lett 240:339–354, 2005) RSCM method for temperatures >600 and <340 °C. We show that the higher and lower zones of Bomdila Gneiss (BG) experienced temperature of ~600 °C and exhumed at different stages along the Bomdila Thrust (BT) and Upper Main Boundary Thrust (U.MBT). Pyrolysis analysis of the CM together with the Fission Track ages from upper Siwaliks corroborates the RSCM thermometry estimate of ~240 °C. The results indicate that the Permian sequence north of Lower MBT was deposited at greater depths (>12 km) than the upper Siwalik sediments to its south at depths <8 km before they were exhumed. The ⁴⁰Ar/³⁹Ar ages suggest that the upper zones of Se La evolved ~13–15 Ma. The middle zone exhumed at ~11 Ma and lower zone close to ~8 Ma indicating erosional unroofing of the MCT sheet. The footwall of MCTZ cooled between 6 and 8 Ma. Analyses of P–T path imply that LHS between MCT and U.MBT zone falls within the kyanite stability field with near isobaric condition. At higher structural level, the temperatures increase gradually with P–T conditions in the sillimanite stability field. The near isothermal (700–800 °C) condition in the GHS, isobaric condition in the MCTZ together with T–t path evidence of GHS that experienced relatively longer duration of near peak temperatures and rapid cooling towards MCTZ, compares the evolution of GHS and inverted metamorphic gradient closely to channel flow predictions.     

Evaluation of gridded precipitation data in the Hindu Kush–Karakoram–Himalaya mountainous area

The accurate measurement of precipitation is crucial for hydrological studies. This is especially true for the Hindu Kush–Karakoram–Himalaya (HKKH) mountain region, which is characterized by high spatiotemporal precipitation variability. The paucity of raingauges makes it difficult to measure precipitation in this region precisely. We conducted evaluation of TMPA 3B42V7 and APHRO 1101 in the HKKH area on a daily basis at a spatial resolution of 0.25°?×?0.25°, using 27 raingauges. Statistically, the largest error in the gridded data arose mainly from elevation, followed by volumetric error and Nash–Sutcliffe efficiency. Overall, the TMPA data have a poor correlation with ground observations in the HKKH area, especially for higher altitudes. The western areas are relatively more underestimated and the Karakoram shows higher frequency of bias in the TMPA retrievals. This method could help improve the satellite precipitation estimation algorithm as it considers local physiography and climatic factors.     

The study of indoor radon in the urban dwellings using plastic track detectors

Radon and its progeny have been recognized as one of the major contributors to the natural radiation and health hazards in the human dwellings. Even lung cancer is expected if it is present in enhanced levels beyond maximum permissible limit. This paper reports the measurements of indoor radon and its progeny in the urban dwellings of the Etah district of Uttar Pradesh province in Northern India using the cellulose nitrate (LR-115 type-II) plastic track detectors. It is found that the values of radon concentration vary from 3.52 to 248.64 Bq m⁻³ with a standard deviation of 69.19. The values of radon progeny concentration vary from 0.38 to 26.88 mWL with a standard deviation of 7.48. The effective dose has been calculated and found to vary from 0.05 to 3.76 mSv year⁻¹ with a standard deviation of 1.05. The lifetime fatality risk is found to vary from 0.04 × 10⁻⁴ to 2.90 × 10⁻⁴. The results have been compared with the results reported in the rural areas of the same district.     

Measurements of indoor radon, thoron, and their progeny using twin cup dosimeters in rural areas of Northern India

Radon, thoron, and their progeny are largest contributors to the radiation dose received by human beings present in the natural environment. The indoor radon depends upon many factors such as building materials, meteorology, ventilation, and occupant’s behavior. This paper presents the measurements of indoor radon, thoron, and their progeny in four villages in rural area of district Kanshiram Nagar (Kasganj) in the state of Uttar Pradesh in Northern India. The concentration of indoor radon and thoron varies from 10.32 to 72.24 and 11.61 to 84.49 Bq m^?3 with a geometric mean (GM) of 29.49 and 31.20 Bq m^?3, respectively. The concentration of radon and thoron daughters was found to vary from 1.11 to 7.80 and 0.31 to 2.28 mWL, respectively. The annual exposure due to radon and thoron mainly vary from 0.05 to 0.30 WLM. The preliminary results (i.e., bare mode exposure of the LR-115 detectors fixed on cards) of this study have been separately published and compared this recent data with those results.     

Faulted anticlines (desert roses) and linear slope deposits in Northwest Iraq: analysis of some morphotectonic features

Distinctive landform of juxtaposition of relatively straight exposures of slope and Quaternary deposits against older rock units in addition to the omission of younger ones are recognized in the Zagros low-folded zone of Mosul area. This phenomenon is attributed to the kinetics and the geometry of basin inversion. Positively inverted faults and their associated folds developed up-growing structures with reverse fault scarps. Those growing structures are passively uplifted above lower blind thrust fault. The up-moving faults were subjected to erosion. The interaction between the rates of erosion and uplift controls the formation of slope and other Quaternary deposits and their distribution. Fast uplift of the reverse faults resulted into formation of cliffs representing the fault scarps and the formation of slope deposits directly next to them. The linear traces of the reverse faults control the straight linear map view distribution of the associated slope deposits. Slower rates of uplift give considerable time to erosion and in consequence the fault scarps are deeply eroded and disappear. This process also resulted into deposition of the other types of Quaternary deposits but still the linear contact between the geological rock units and the Quaternary deposits is existing and easily noticed. The analysis of these features and their interpretation has resulted in a new interpretation of the geological maps of Mosul area and the recognition of many reverse faults that bound the exposed structures. This fault system is used to restore the configuration of the original Late Cretaceous extensional basin.     

Fluid–rock interactions associated with regional tectonics and basin evolution

An integrated approach consisting of fracture analysis, petrography, carbon, oxygen and strontium‐isotope analyses, as well as fluid‐inclusion micro‐thermometry, led to a better understanding of the evolution of fluid–rock interactions and diagenesis of the Upper Permian to Upper Triassic carbonates of the United Arab Emirates. The deposited carbonates were first marked by extensive early dolomitization. During progressive burial, the carbonates were affected by dolomite recrystallization as well as precipitation of vug and fracture‐filling dolomite, quartz and calcite cements. After considerable burial during the Middle Cretaceous, sub‐vertical north–south oriented fractures (F1) were cemented by dolomite derived from mesosaline to hypersaline fluids. Upon the Late Cretaceous maximum burial and ophiolite obduction, sub‐vertical east–west fractures (F2) were cemented by dolomite (Dc2) and saddle dolomite (Ds) derived from hot, highly saline fluids. Then, minor quartz cement has precipitated in fractures from hydrothermal brines. Fluid‐inclusion analyses of the various diagenetic phases imply the involvement of increasingly hot (200°C) saline brines (20 to 23% NaCl eq.). Through one‐dimensional burial history numerical modelling, the maximum temperatures reached by the studied rocks are estimated to be in the range of 160 to 200°C. Tectonically‐driven flux of hot fluids and associated diagenetic products are interpreted to have initiated during the Late Cretaceous maximum burial and lasted until the Oligocene–Miocene compressional tectonics and related uplift. The circulation of such hydrothermal brines led to partial dissolution of dolomites (Dc2 and Ds) and to precipitation of hydrothermal calcite C1 in new (mainly oriented north–south; F3) and pre‐existing, reactivated fractures. The integration of the obtained data confirms that the diagenetic evolution was controlled primarily by the interplay of the burial thermal evolution of the basin and the regional tectonic history. Hence, this contribution highlights the impacts of regional tectonics and basin history on diagenetic processes, which may subsequently affect reservoir properties.     

Study of radium content and radon exhalation rates in soil samples of northern India

Radon is a radioactive hazardous and ubiquitous gas. It has been recognized to be one of the major contributors to natural radiation even causing lung cancer if present at enhanced levels. There are large variations in data available in the literature for radium content and radon exhalation rates of various materials. It is a well-documented fact that radon exhalation from the ground surface depends upon a number of parameters such as soil grain size, soil porosity and radium content. For this purpose, in this study the so-called can technique has been used to measure radium content and exhalation rates of radon in soil samples collected from different places of Aligarh, Etah and Mathura districts of Uttar Pradesh??a province in northern India. These districts lie within the subtropical region of the Indo-Gangetic plains. The values of effective radium content are found to vary from 8.11 to 112.83?Bq?kg^?1 with a mean value of 33.21?Bq?kg^?1 and a standard deviation of 28.15. The values of mass exhalation rates of radon vary from 0.76?×?10^?6 to 15.80?×?10^?6?Bq?kg^?1?day^?1 with a mean value of 4.21?×?10^?6?Bq?kg^?1?day^?1, while the surface exhalation rates vary from 1.97?×?10^?5 to 41.03?×?10^?5?Bq?m^?2?day^?1 with a mean value of 10.93?×?10^?5?Bq?m^?2?day^?1.     

Prediction of river bank erosion and protection works in a reach of Chenab River,Pakistan

The impacts of floods on river bank erosion are generally significant in the alluvial river reaches. This paper presents the prediction of the river bank erosion along the right bank in the reach of Chenab River (starting from downstream of Marala Barrage) where excessive erosion had been reported. The bank erosion is predicted due to flow/flood events of 2010 by coupling the output from the two-dimensional numerical model to the excess shear stress approach. The predicted bank erosion was compared with the one estimated from Landsat images. The Landsat ETM+ images were processed in the ArcGIS software to assess the external bank erosion. The results show that the excess shear stress approach underpredicts the bank erosion. Therefore, the erodibility coefficient was modified by forcing the best agreement between predicted and estimated (i.e., from Landsat images) bank erosion which was used for further analysis. The results reveal that coupling the output from the numerical model to the excess shear stress approach (by modifying the erodibility coefficient) predicts the river bank erosion with a reasonable level of accuracy, thus helpful to identify the locations for the protection works. The predicted river bank erosion presents good coefficient of determination (R²) of 0.82 when compared with the estimated bank erosion from Landsat images. The findings of the present study will help to implement the river protection works at the identified locations in the selected reach of River Chenab and will also act as a guideline for similar river reaches.     

Re-evaluations of seismic hazard of Iraq

In recent years, Iraq has experienced an increase in seismic activity, especially, near the east boundary with Iran. Previous studies present their results in terms of PGA and for return periods of 500 years and less, and other studies not continued to include the whole PSHA process whereas some recent studies continued to include the whole PSHA process using earthquakes data till 2009 including dependent events. This study includes two main stages, the first is collecting the earthquakes records including the recent events till the end of March 2016 and applying data processing to get the net catalog to independent events. The second stage is applying the steps of PSHA method. Matlab programs have been built to execute these two stages and to convert the results of PSHA computations into contours of 5% damping PGA and spectral accelerations at 0.2 and 1.0 s for a return period of 2475 years, and for rock sites. Also, spectral acceleration against period has been presented for main cities. Also, the PGA map, for a return period of 475 years, has been plotted and then prepared together with similar maps of neighbor countries in one map for comparison. In general, this comparison indicates the similarity in behavior but, the values reveal a relative agreement and they are between Turkish and Iranian values.     

Evaluating best evaporation estimate model for water surface evaporation in semi‐arid region,India

Evaluating performances of four commonly used evaporation estimate methods, namely; Bowen ratio energy balance (BREB), mass transfer (MT), Priestley–Taylor (PT) and pan evaporation (PE), based on 4 years experimental data, the most effective and the reliable evaporation estimates model for the semi‐arid region of India has been derived. The various goodness‐of‐fit measures, such as; coefficient of determination (R²), index of agreement (D), root mean square error (RMSE), and relative bias (RB) have been chosen for the performance evaluation. Of these models, the PT model has been found most promising when the Bowen ratio, β is known a priori, and based on its limited data requirement. The responses of the BREB, the PT, and the PE models were found comparable to each other, while the response of the MT model differed to match with the responses of the other three models. The coefficients, β of the BREB, µ of the MT, α of the PT and K_P of the PE model were estimated as 0·07, 2·35, 1·31 and 0·65, respectively. The PT model can successfully be extended for free water surface evaporation estimates in semi‐arid India. A linear regression model depicting relationship between daily air and water temperature has been developed using the observed water temperatures and the corresponding air temperatures. The model helped to generate unrecorded water temperatures for the corresponding ambient air temperatures. Copyright © 2007 John Wiley & Sons, Ltd.