Sedimentation of terrigenous red soils in coastal area adjacent to an estuary and coral reefs,the Okkubi River estuary,Okinawa Island,Japan

Sedimentation process of fine-grained terrigenous red soils was observed on the seafloor by coral reefs near an estuary using a paired mooring of turbidity meter and sediment trap or a mooring of sediment trap and current meter. Silty clays contained in the bottom calcareous sands were mainly resuspended and trapped in both surface and bottom layer traps, at noncatastrophic normal sedimentation periods. In addition, silty clays were supplied to this mooring site by inflowing river. Turbidity and the flux rate determined by sediment traps show certain relationship accompanied with the coefficient, which is changed by precipitation, current, and other conditions. Resuspension process caused by a typhoon was recorded as both core sequence of sediment trap and time-series data of bottom current. Maximum velocity of 49.5 cm/s was recorded from bottom currents resulting from the passing of attyphoon at the mooring site. A graded sand layer is interbedded in dark-gray, silty clay and considered to be a resuspended sediment resulting from the passing of the typhoon. Flux of the resuspended sediments by the typhoon was estimated from this core sequence and compared to the flux observed at the normal sedimentation.     

The effects of the reed,Phragmites australis (Trin.), on substratum grain-size distribution in a salt marsh

The effects of the reed,Phragmites australis (Trin.), growing in a brackish water lagoon, were studied in relation to the grain-size distribution of the substratum. At the salt marshes near the lagoon, the upper soils from the surface to a depth of 20 cm contained much silt-clay. These fine particles were found to be transferred from the river and fish ponds near the lagoon, and to be deposited when the tidal rhythm changed, that is, when the water current stopped. In addition, the fine particles, which were deposited on the bottom of the lagoon adjacent to the marshes, became resuspended as a result of wind-caused wave action, and then were transported and redeposited in the salt marshes at the flood tide. Since the reeds further reduced the water current caused by the waves and tide, the reeds were thought to promote redeposition of the resuspended matter. In other words, the reeds were considered to protect deposited and redeposited particles such as silt and clay from resuspension as a result of wave action by reducing the effects of waves and wind. These processes suggested that silt-clay will become abundant in the substratum of the salt marsh adjacent to the lagoon.     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.     

Field observations of debris-flow initiation processes on sediment deposits in a previous deep-seated landslide site

Although information regarding the initiation processes of debris flows is important for the development of mitigation measures,field data regarding these processes are scarce.We conducted field observations of debris-flow initiation processes in the upper Ichinosawa catchment of the Ohya landslide,central Japan.On 19 June 2012,our videocamera monitoring systems recorded the moment of debris-flow initiation on channel deposits(nine surges) and talus slopes(eight surges).The initiation mechanisms of these surges were classified into three types by analyzing the video images: erosion by the surface flow,movement of deposits as a mass,and upward development of the fluid area.The first type was associated with the progress of surface flow from the upper stream on unsaturated channel deposits.The second type was likely caused by an increase in the pore water pressure associated with the rising in the groundwater level in channel deposits;a continuous water supply from the upper stream by the surface flow might have induced this saturation.The third type was associated with changes in the downstream topography caused by erosion.The flow velocity of most surges was less than 3 m s~(-1) and they usually stopped within 100 m from the initiation point.Surges with abundant pore fluid had a higher flow velocity(about 3- 5 m s~(-1)) and could travel for alonger duration.Our observations indicate that the surface flow plays an important role in the initiation of debris flows on channel deposits and talus slopes.     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

Effect of open gap in coastal forest on tsunami run-up—investigations by experiment and numerical simulation

The objective of this study is to investigate the effects of an open gap, such as a road, in a coastal forest on tsunami run-up. A numerical model based on two-dimensional nonlinear long-wave equations was developed to account for the effects of drag and turbulence induced shear forces due to the presence of vegetation. Experiments were conducted on a forest simulated with vertical cylinders by changing the gap width. The numerical model was validated in good agreement with the experimental results. The numerical model was then applied to a wide forest of Pandanus odoratissimus, a tree species that is a dominant coastal vegetation on a sand dune in South and Southeast Asia. The effect of vertical stand characteristics of P. odoratissimus with aerial roots was considered on the drag resistance. A straight open gap perpendicular to the shoreline was used to investigate the effect of gap width. As the gap width increases, the flow velocity at the end of the open gap first increases, reaches a maximum, and then decreases, while the run-up height increases monotonously. The maximum velocity in the present condition is 1.7 times the maximum velocity without a coastal forest. The effects of different gap arrangements in the forest on tsunami run-up were also investigated in this paper. The flow velocity at the end of an open gap can be reduced by a staggered arrangement.     

Fluorine contents of some hydrous minerals derived from upper mantle and lower crust

Fluorine contents have been determined in about forty samples of amphibole, mica and apatite in alkali basalt and kimberlite and their incorporated xenoliths. They show a wide variation ranging from 15,000 to 100 ppm, corresponding to about 40 to 0.2 per cent substitution of F for OH in hydroxyl site of hydrous minerals. Fluorine abundances in these minerals reflect those of their host magmas or rocks; Itinome-gata xenoliths are the lowest and South African kimberlites and their xenoliths are the highest. F/OH and also. D/H (Kuroda et al. 1975) ratios in coexisting phlogopite-potassic richterite from peridotite and mica nodules are thoughts to have formed under no simple equlibrium conditions.     

Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.     

Geochemical and isotopic characteristics of the Cretaceous Orikabe Plutonic Complex,Kitakami Mountains,Japan: magmatic evolution in a zoned pluton and significance of a subduction-related mafic parental magma

The Orikabe Plutonic Complex, northeast Japan, is a zoned pluton and one of the Cretaceous intrusions in the Circum-Pacific area. In the Main body, K-rich calc-alkaline rocks composed of marginal gabbro and a large amount of monzodiorite–quartz monzonite–monzogranite are intruded successively by innermost calc-alkaline rocks of granodiorite. The gabbro and monzodiorite–monzogranite have a continuous chemical variation, while the granodiorite has lower concentrations of K, Rb, Y, Zr, Nb and F at the same SiO₂ content. The gabbro and monzodiorite–quartz monzonite have a Rb-Sr whole-rock age of 119±12 Ma with an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70392±0.00007. The initial ⁸⁷Sr/⁸⁶Sr ratio of the innermost granodiorite is estimated to be about 0.7042. The ¹⁸O values of fresh rocks range from +6.7 to +8.3, indicating a positive correlation with SiO₂ contents. The K-rich calc-alkaline rocks were derived through fractional crystallization from a mafic parental magma with a slightly high ¹⁸O value, implying a major contribution of a sub-arc mantle at a continental margin. Trace element modeling indicates that the source could have been a fertile lherzolite enriched in LILE and depleted in HFSE. The innermost granodiorite was the differentiation product of a distinct parental magma, suggesting the involvement of a small amount of crustal component in the source and partial melting under a more hydrous condition.Editorial responsibility: J. Hoefs