The Anarak, Jandaq and Posht-e-Badam metamorphic complexes in central Iran: New geological data, relationships and tectonic implications

The Anarak, Jandaq and Posht-e-Badam metamorphic complexes occupy the NW part of the Central-East Iranian Microcontinent and are juxtaposed with the Great Kavir block and Sanandaj-Sirjan zone. Our recent findings redefine the origin of these complexes, so far attributed to the Precambrian–Early Paleozoic orogenic episodes, and now directly related to the tectonic evolution of the Paleo-Tethys Ocean. This tectonic evolution was initiated by Late Ordovician–Early Devonian rifting events and terminated in the Triassic by the Eocimmerian collision event due to the docking of the Cimmerian blocks with the Asiatic Turan block.

The “Variscan accretionary complex” is a new name we proposed for the most widely distributed metamorphic rocks connected to the Anarak and Jandaq complexes. This accretionary complex exposed from SW of Jandaq to the Anarak and Kabudan areas is a thick and fine grain siliciclastic sequence accompanied by marginal-sea ophiolitic remnants, including gabbro-basalts with a supra-subduction-geochemical signature. New ⁴⁰Ar/³⁹Ar ages are obtained as 333–320 Ma for the metamorphism of this sequence under greenschist to amphibolite facies. Moreover, the limy intercalations in the volcano-sedimentary part of this complex in Godar-e-Siah yielded Upper Devonian–Tournaisian conodonts. The northeastern part of this complex in the Jandaq area was intruded by 215 ± 15 Ma arc to collisional granite and pegmatites dated by ID-TIMS and its metamorphic rocks are characterized by some ⁴⁰Ar/³⁹Ar radiometric ages of 163–156 Ma.

The “Variscan” accretionary complex was northwardly accreted to the Airekan granitic terrane dated at 549 ± 15 Ma. Later, from the Late Carboniferous to Triassic, huge amounts of oceanic material were accreted to its southern side and penetrated by several seamounts such as the Anarak and Kabudan. This new period of accretion is supported by the 280–230 Ma ⁴⁰Ar/³⁹Ar ages for the Anarak mild high-pressure metamorphic rocks and a 262 Ma U–Pb age for the trondhjemite–rhyolite association of that area. The Triassic Bayazeh flysch filled the foreland basin during the final closure of the Paleo-Tethys Ocean and was partly deposited and/or thrusted onto the Cimmerian Yazd block.

The Paleo-Tethys magmatic arc products have been well-preserved in the Late Devonian–Carboniferous Godar-e-Siah intra-arc deposits and the Triassic Nakhlak fore-arc succession. On the passive margin of the Cimmerian block, in the Yazd region, the nearly continuous Upper Paleozoic platform-type deposition was totally interrupted during the Middle to Late Triassic. Local erosion, down to Lower Paleozoic levels, may be related to flexural bulge erosion. The platform was finally unconformably covered by Liassic continental molassic deposits of the Shemshak.

One of the extensional periods related to Neo-Tethyan back-arc rifting in Late Cretaceous time finally separated parts of the Eocimmerian collisional domain from the Eurasian Turan domain. The opening and closing of this new ocean, characterized by the Nain and Sabzevar ophiolitic mélanges, finally transported the Anarak–Jandaq composite terrane to Central Iran, accompanied by large scale rotation of the Central-East Iranian Microcontinent (CEIM). Due to many similarities between the Posht-e-Badam metamorphic complex and the Anarak–Jandaq composite terrane, the former could be part of the latter, if it was transported further south during Tertiary time.     

Natural oligotrophy vs. pollution-induced eutrophy on the SE Mediterranean shallow shelf (Israel): Environmental parameters and benthic foraminifera

The eastern Mediterranean is naturally highly oligotrophic, but urbanization along the Levant coast has led to raised organic and nutrient loads. This study tracks living foraminiferal assemblages at two sites near an activated sewage sludge outfall from 11/2003 to 5/2004. Oligotrophic site PL29 shows seasonal variations in O_2, chlorophyll a, and organic carbon, and has an abundant, diverse benthic foraminiferal assemblage living at various in-sediment depths. At eutrophic site PL3, ∼16 years of sludge injection favor a depleted assemblage primarily of opportunist foraminifera. This site shows less seasonality, is subjected to organic matter overload, O₂-stress, and periodic anoxia, foraminifera are less abundant and diverse, and live at shallower depths. The assemblages at both sites represent a common pool of species, with Ammonia tepida highly dominant. Benthic foraminifera were therefore found to be sensitive to trophic trajectories, respond on sub-seasonal time-scales, and track injection and dispersal of organic loads on the shelf.     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Adsorption of dissolved phosphate onto loess particles in surface and deep Eastern Mediterranean water

The objective of this study was to examine whether dissolved inorganic phosphate (DIP) is removed from the Eastern Mediterranean Sea by adhering to atmospherically deposited loess particles sinking through the water column. In a series of radiolable experiments, loess from the Negev Desert, treated in various ways, was added to surface (SSW) and deep (DSW) seawater spiked with ³²PO₄⁻³. It was shown that when fresh loess reaches the Mediterranean SSW approximately 1.3 μmol P/g are released (11% of the total P concentration). Biological activity and inorganic particles removed similar amounts of the tracer (30–40%) from SSW. It was estimated that about 0.2 μmol P/g of ‘aged loess' (proxy of particles sinking into DSW), were removed from poisoned SSW and DSW, while there was minor adsorption when either nothing or quartz powder was added. The adsorbed DIP accounts for approximately 15% of the released P and is equivalent to about 2% of the remaining P (11.17 μmol P/g loess). Therefore, the process of DIP removal by atmospherically derived particles exists, but due to the higher release of P, the result is a net addition of dissolved atmospheric phosphorus in seawater. It is postulated that in actual SSW where dust concentrations are much lower, biological uptake out-competes inorganic adsorption, although it was demonstrated that the decrease in loess particle concentrations tends to increase their adsorption capacity. As the loess descends into the DSW it continues to remove DIP and thus transports phosphate from the water column to the sediments. A preliminary quantitative estimate suggests that the process of DIP removal by loess particles cannot explain the phosphate ‘deficit' in the Eastern Mediterranean DSW characterized by unusually high DIN/DIP ratios (27) reported by others.     

A chemical investigation of the transport and fate of petroleum hydrocarbons in littoral and benthic environments: The TSESIS oil spill

The fate of saturated and aromatic hydrocarbons discharged into the coastal Baltic Sea environment from the TSESIS oil spill has been studied in the acute and postacute (one year) phases of the spill. Periodic samples of Mytilus edulis (mussels) from eight littoral zone stations and Macoma balthica from nine soft bottom stations were obtained as well as sediment trap samples and surface sediment samples. Glass capillary gas chromatography and gas chromatographic mass spectrometry were used as the analytical tools to determine saturated and aromatic hydrocarbon composition and concentrations in these samples.Sediment trap samples indicated that sizable quantities of chemically and microbially weathered oil were sedimented, and available for benthic uptake shortly after the spill. After initial uptake of sedimented oil (500 to 1000 μ/g dry weight), Macoma populations appear to have begun slow depuration through the first winter after the spill, but TSESIS oil was again introduced to the benthic stations studied during the following summer. Mytilus populations in the region were severely impacted by the oil. Initial depuration of spilled oil during the first month was rapid and nearly complete at all but the most heavily impacted stations one year after the spill. The post-spill depuration of assimilated hydrocarbons was characterised by a relative retention of alkylated dibenzothiophenes and alkylated phenanthrenes compared to their unsubstituted parent compounds and compared with the entire homologous naphthalene series.These data suggest that petroleum hydrocarbons from the TSESIS spill have become a chronic source of degraded saturated and aromatic hydrocarbons to the soft bottom benthic communities. Petroleum hydrocarbons in the benthic environment from this spill appear to reside in the difficulty sampled and mobile flucculent layer at the sediment/water interface and may affect epifaunal communities for an extended period of time.     

A SENSITIVE AUTOMATED METHOD FOR DETERMINATION OF MERCURY IN GEOLOGICAL MATERIALS BY COLD VAPOR ATOMIC ABSORPTION

An improved sensitive automated method for the determination of mercury in geological materials by cold vapor atomic absorption has been developed. Sample is digested with nitric and hydrochloric acids at low heat. Mercuric ions in the digested sample solution are reduced to elemental mercury by stannous chloride. The gaseous mercury separated from the solution is swept by a stream of argon into the absorption cell of an LDC/Milton Roy Mercury Monitor where the atomic absorption at 253.7 nm is measured. The precision of the method is 2.7% r.s.d., and the detection limit is 1 ppb. The results on 53 international geochemical reference samples are presented.     

Land use and land cover classification over a large area in Iran based on single date analysis of satellite imagery

Accelerated soil erosion, high sediment yields, floods and debris flow are serious problems in many areas of Iran, and in particular in the Golestan dam watershed, which is the area that was investigated in this study. Accurate land use and land cover (LULC) maps can be effective tools to help soil erosion control efforts. The principal objective of this research was to propose a new protocol for LULC classification for large areas based on readily available ancillary information and analysis of three single date Landsat ETM+ images, and to demonstrate that successful mapping depends on more than just analysis of reflectance values. In this research, it was found that incorporating climatic and topographic conditions helped delineate what was otherwise overlapping information. This study determined that a late summer Landsat ETM+ image yields the best results with an overall accuracy of 95%, while a spring image yields the poorest accuracy (82%). A summer image yields an intermediate accuracy of 92%. In future studies where funding is limited to obtaining one image, late summer images would be most suitable for LULC mapping. The analysis as presented in this paper could also be done with satellite images taken at different times of the season. It may be, particularly for other climatic zones, that there is a better time of season for image acquisition that would present more information.     

Energy and GHG emissions management of agricultural systems using multi objective particle swarm optimization algorithm: a case study

In the recent centuries, one of the most important ongoing challenges is energy consumption and its environmental impacts. As far as agriculture is concerned, it has a key role in the world economics and a great amount of energy from different sources is used in this sector. Since researchers have reported a high degree of inefficiency in developing countries, it is necessary for the modern management of cropping systems to have all factors (economics, energy and environment) in the decision-making process simultaneously. Therefore, the aim of this study is to apply Multi-Objective Particle Swarm Optimization (MOPSO) to analyze management system of an agricultural production. As well as MOPSO, two other optimization algorithm were used for comparing the results. Eventually, Taguchi method with metrics analysis was used to tune the algorithms’ parameters and choose the best algorithms. Watermelon production in Kerman province was considered as a case study. On average, the three multi-objective evolutionary algorithms could reduce about 30 % of the average Greenhouse Gas (GHG) emissions in watermelon production although as well as this reduction, output energy and benefit cost ratio were increased about 20 and 30 %, respectively. Also, the metrics comparison analysis determined that MOPSO provided better modeling and optimization results.