Color removal from industrial wastewater with a novel coagulant flocculant formulation

Chemically enhanced wastewater treatment is attracting substantial interest among the currently employed chemical unit processes in wastewater treatment. Coagulation-flocculation has received considerable attention for yielding high pollutant removal, especially color removal. This investigation presents a novel formulation of coagulation-flocculation for color removal from industrial wastewater and illustrates its efficiency, with aid of measurement of solid sludge content, suspended solid content, percentage of solid recovery, UV absorption in wastewater effluent from two automotive factories. The results show that the novel formulation can remove color content from wastewater efficiently. The treated wastewater had UV absorption close to distillated water and color was removed up to 96% by flocculation / coagulation treatment.     

The structure and dynamics of 2-dimensional fluids in swelling clays

The interlayer pores of swelling 2:1 clays provide an ideal 2-dimensional environment in which to study confined fluids. In this paper we discuss our understanding of the structure and dynamics of interlayer fluid species in expanded clays, based primarily on the outcome of recent molecular modelling and neutron scattering studies. Counterion solvation is compared with that measured in bulk solutions, and at a local level the cation-oxygen coordination is found to be remarkably similar in these two environments. However, for the monovalent ions the contribution to the first coordination shell from the clay surfaces increases with counterion radius. This gives rise to inner-sphere (surface) complexes in the case of potassium and caesium. In this context, the location of the negative clay surface charge (i.e. arising from octahedral or tetrahedral substitution) is also found to be of major importance. Divalent cations, such as calcium, eagerly solvate to form outer-sphere complexes. These complexes are able to pin adjacent clay layers together, and thereby prevent colloidal swelling. Confined water molecules form hydrogen bonds to each other and to the clays' surfaces. In this way their local environment relaxes to close to the bulk water structure within two molecular layers of the clay surface. Finally, we discuss the way in which the simple organic molecules methane, methanol and ethylene glycol behave in the interlayer region of hydrated clays. Quasi-elastic neutron scattering of isotopically labelled interlayer CH₃OD and (CH₂OD)₂ in deuterated clay allows us to measure the diffusion of the CH₃- and CH₂-groups in both clay and liquid environments. We find that in both the one-layer methanol solvates and the two-layer glycol solvates the diffusion of the most mobile organic molecules is close to that in the bulk solution.     

Potential Salinity and Temperature Futures for the Chesapeake Bay Using a Statistical Downscaling Spatial Disaggregation Framework

Estuaries are productive and ecologically important ecosystems, incorporating environmental drivers from watersheds, rivers, and the coastal ocean. Climate change has potential to modify the physical properties of estuaries, with impacts on resident organisms. However, projections from general circulation models (GCMs) are generally too coarse to resolve important estuarine processes. Here, we statistically downscaled near-surface air temperature and precipitation projections to the scale of the Chesapeake Bay watershed and estuary. These variables were linked to Susquehanna River streamflow using a water balance model and finally to spatially resolved Chesapeake Bay surface temperature and salinity using statistical model trees. The low computational cost of this approach allowed rapid assessment of projected changes from four GCMs spanning a range of potential futures under a high CO₂ emission scenario, for four different downscaling methods. Choice of GCM contributed strongly to the spread in projections, but choice of downscaling method was also influential in the warmest models. Models projected a ~2–5.5 °C increase in surface water temperatures in the Chesapeake Bay by the end of the century. Projections of salinity were more uncertain and spatially complex. Models showing increases in winter-spring streamflow generated freshening in the Upper Bay and tributaries, while models with decreased streamflow produced salinity increases. Changes to the Chesapeake Bay environment have implications for fish and invertebrate habitats, as well as migration, spawning phenology, recruitment, and occurrence of pathogens. Our results underline a potentially expanded role of statistical downscaling to complement dynamical approaches in assessing climate change impacts in dynamically challenging estuaries.     

Comparison of two alluvial aquifers shows the probable role of river sediments on the release of arsenic in the groundwater of district Vehari,Punjab, Pakistan

The study was done to assess the effect of the river Sutlej on arsenic (As) contamination. Sampling was done from the alluvial plain with increasing distance from the river Sutlej in district Vehari and compared with the study done in the proximity of River Sutlej. Sixty (60) groundwater samples mostly from shallow depths were collected and analyzed for As concentrations. Multivariate statistical tools (PCA and CA), saturation index, piper plots and Gibbs diagrams were used to detect evidence about the interrelationship and sources of As and other water quality variables responsible for groundwater contamination. Results revealed that As concentration ranged from below detection limit to 156 µg/L indicating that 50% samples exceeding the WHO guidelines (10 µg/L) and 17% exceeding the Pakistan National Environmental Quality Standards (NEQS) limits (50 µg/L) Sutlej. The piper plot revealed that water chemistry of the study area was Ca–HCO₃^?, Ca–Mg–Cl, type. Correlations between As and HCO₃^? (r²?=?0.433) was positive, while negative correlations were observed between As–Mn²⁺ and As–Fe²⁺ (r²?=???0.102), (r²?=?0.107) respectively. Geochemical signatures of the groundwater in the study area showed that the As could be released by oxidative dissolution to some extent and elevated evaporation in the arid environment of the study area under the stimulus of alkaline water and high pH (range 7.1–8.4). Although the concentrations are exceeding the WHO limit in 50% of the water samples but, are less than the previous study done in Mailsi near River Sutlej. Further, the concentrations decreased as the distance from the River increased which shows the probable role of sediments deposited by the River Sutlej.     

Mineralogy,Fluid inclusions and stable isotopes study constraints on genesis of sulfide ore mineral,Qaladiza area Qandil Series,Iraqi Kurdistan Region

The metalized quartz veins is located 5 km west of the Iraqi-Iran border in the Qandil range. The quartz veins included sulfide and oxide ore minerals which mostly occur in the form of open-space filling texture. The polymetallic mesothermal quartz veins are hosted by marble and phyllite rocks. Within these veins, multiphase, open-space filling and crustiform, bedding to massive textures with pyrite, sphalerite, galena, chalcopyrite,galena, sphalerite, tenorite, azurite, and malachite are observed. Selected samples were analyzed by using ore microscopy and electron probe micro analyzer (EPMA) and scanning electron microscope (SEM). Ore minerals show replacement textures. The paragenesis diagram was made from a careful study of polished sections and three stages have been identified including pre-stage mineralization, mineralization, and post-mineralization stages.Fluid inclusion microthermometric analysis of 15 primary inclusions of quartz veins indicated that ore mineralization at the studied area were formed by a mesothermal, low to medium density, and dilute NaCl-type fluid system. The source of the fluid is mostly metamorphic which became mixed with other fluids later. Hydrothermal fluids of the selected studied area were classified into two groups based on microthermometry study; the first group had a higher homogenization temperature (335.5 to 386.8 °C) than the second group (194.1 to 298.5 °C), with a small difference in salinity between them. Nearly each group has different complexes including chloride and sulfide complexes respectively. The results of stable sulfur isotope of the ore minerals (chalcopyrite and sphalerite) confirmed the sedimentary and/or metamorphic origin of the ore mineralization.     

Structure and stratigraphy of Rumbli and Panjar areas of Kashmir and Pakistan with the aid of GIS

The project area lies in the southern part of the Hazara Kashmir syntaxis. The Hazara Kashmir syntaxis is an antiformal structure. The project area includes Rumbli, Namb, Chatrora, Chachan, Panjar, Barathian and Utrinna areas of Rawalpindi and Sudhnoti districts. The southeastern limb of the Hazara Kashmir syntaxis is imbricated along Punjal thrust, Main Boundary thrust and Riasi fault. The Jhelum fault truncates the western limb of Hazara Kashmir syntaxis. The core of syntaxis comprises of Himalayan molasse deposits. These molasse deposits represent the part of cover sequence of Indian plate. These Himalayan molasse deposits include the Early to Middle Miocene Kamlial Formation, Middle to Late Miocene Chinji Formation, Late Miocene Nagri Formation and Late Miocene Dhok Pathan Formation. The area is highly deformed resulting folds and faults. The major folds in the project area are the Panjar anticline, Barathian syncline, Barathian anticline, Rumbli anticline, Chatrora antiformal syncline and Namb syncline. The folds are either northwest-southeast trending or southwestnortheast trending. The folds are asymmetric, open, and gentle and close in nature. The folds are southwest, northeast or southeast vergent. The Jhelum fault truncates the northeast and northwest trending structures. The folds and faults are the result of northeastsouthwest or northwest-southeast Himalayan compression.     

Valuation of socio-economic indicators for progressing urban sustainability under distinctive rubrics

The key objective of the study is to collect the factors which play an important role in the city's sustainability and implementation advantages for the development of cities in future. This article develops an urban sustainability assessment framework by giving GIS-based decision support tools to guide cities toward sustainability. Multicriteria analysis was used as the decision support system and provides an analytical framework for assessing differences in the level of criteria and ranking decision options. It has the capability for assessment of urban sustainability because it brings sustainability criteria from three pillars of sustainability, environmental, social, and economic, which provide an integrated approach for assessment of urban sustainability. The GIS-based multicriteria analysis serves as a sustainability support system that maps urban sustainability and the underlying environmental, social, and economic conditions. The results from the study show that the four cities - Faisalabad, Lahore, Gujranwala, and Multan - have better economic conditions while only Lahore and Faisalabad showed social progress and the remaining cities showed less suitability. For the environmental index, none of the cities attained high suitability. Lahore, Faisalabad, and Rawalpindi showed better conditions than Gujranwala and Multan. It is demonstrated that Punjab cities have made progress in economic condition and improvement in social condition but have poor environmental condition. In the study, the environmental dimension has indicators which have more impact on the urban sustainability. Environmental degradation is observed in all selected regions and not a single region showed suitability toward its environmental condition and due to this none of the cities gained suitable scores for urban sustainability. Consequently, urban sustainability is a multidimensional and dynamic process that needs regular evaluation and monitoring. Thus, this article contends that the tools help to highlight and emphasize those areas that need guidance in achieving urban sustainability.     

Shear flow driven counter rotating vortices in an inhomogeneous dusty magnetoplasma

The coupling of Shukla-Varma (SV) and convective cell modes is discussed in the presence of non-Boltzmannian electron response and parallel equilibrium shear flow. In the linear case, a new dispersion relation is derived and analyzed. It is found that the coupled SV and convective cell modes destabilize in the presence of electron shear flow. On the other hand, in the nonlinear regime, it is shown that Shukla-Varma mode driven counter rotating vortices can be formed for the system under consideration. It is found that these vortices move slowly by comparison with the ion acoustic or electron drift-wave driven counter rotating vortices. The relevance of the present investigation with regard to space plasmas is also pointed out.     

Relationships between the AE, ap and Dst indices near solar minimum (1974) and at solar maximum (1979)

Three-hourly average values of the Dst, AE and ap geomagnetic activity indices have been studied for 1 years duration near the solar minimum (1974) and also at the solar maximum (1979). In 1979 seven intense geomagnetic storms (Dst < –100 nT) occurred, whereas in 1974 only three were reported. This study reveals: (1) the yearly average of AE is greater in 1974 than in 1979, whereas the inverse seems to be true for the yearly average of Dst, when a higher number of intense storms is present. These averages indicate the kind of activity occurring on the sun as shown in earlier work. (2) The seasonal variation of Dst is higher than that of ap and is almost negligible in AE. (3) The correlation coefficient of ap × AE is in general the highest, as the magnetometers that monitor both indices are close, and is surpassed only by the ap × Dst correlation during geomagnetic storms, when the influence of the ring current is dominant. The correlation of ap × Dst also shows a seasonal variability. (4) For the first time a study of correlation between ap and a linear combination of AE and Dst has also been made. We found higher correlation coefficients in this case as compared to those between ap × Dst and ap ×xs AE.