Observational Support for the Stability Dependence of the Bulk Richardson Number Across the Stable Boundary Layer

The bulk Richardson number ( $Ri_{Bh}$ ; defined over the entire stable boundary layer) is commonly utilized in observational and modelling studies for the estimation of the boundary-layer height. Traditionally, $Ri_{Bh}$ is assumed to be a quasi-universal constant. Recently, based on large-eddy simulation and wind-tunnel data, a stability-dependent relationship has been proposed for $Ri_{Bh}$ . In this study, we analyze extensive observational data from several field campaigns and provide further support for this newly proposed relationship.     

Evaluation of site effects in the Aterno river valley (Central Italy) from aftershocks of the 2009 L��Aquila earthquake

A temporary network of 33 seismic stations was deployed in the area struck by the 6th April 2009, Mw 6.1 (Scognamiglio et?al. in Seism Res Lett 6/81, 2010), L??Aquila earthquake (central Italy), with the aim to investigate the site amplification within the Aterno river Valley. The seismograms of 18 earthquakes recorded by 14 of the 33 stations were used to evaluate the average horizontal to vertical spectral ratio (HVSR) for each site and the standard horizontal spectral ratio (SSR) between a site and a reference station. The obtained results have been compared to the geological and geophysical information in order to explain the resonance frequencies and the amplification levels with respect to surface geology of the valley. The results indicate that there is no uniform pattern of amplification, because of the complex geologic setting, as the thickness and degree of cementation of the deposits is highly variable.     

Relating Mean Radiosounding Profiles to Surface Fluxes for the Very Stable Boundary Layer

A dataset collected during a measurement campaign in the middle of the Po Valley, Italy, is used to investigate the boundary-layer structure in stable conditions. Empirical formulations for temperature and wind profiles derived from Monin–Obukhov similarity theory are used as regression curves to fit radiosounding profiles in the lower half of the boundary-layer. The best fitting parameters of the regression are then compared to the surface turbulent fluxes as measured by a co-located sonic anemometer. This comparison shows significant discrepancies and supports earlier results showing that surface fluxes, in the limit of high stability, are not adequate scalings for mean profiles. The most evident differences are found for cases for which the bulk Richardson number turns out to be quite large. One of the practical consequences is that boundary-layer height diagnostic formulations that mainly rely on surface fluxes are in disagreement with those obtained by inspecting the thermodynamic profiles recorded during the radiosounding ascent. Moreover the incorrect scaling of similarity profiles in stable conditions leads to the erroneous diagnosis of 2-m air temperatures used in numerical weather prediction validation.     

The contribution of seismic data in microzonation studies for downtown L��Aquila

After the 2009 April 6th Mw 6.3 L??Aquila earthquake (Central Italy) the Italian Civil Defense Department promoted the microzoning study in the ten zones in the epicentral area that suffered major damage. In this paper we present the activities and the results concerning a temporary seismic network installed in the historical L??Aquila city center indicated as ??macroarea 1?? in the microzoning project. Seismic data were collected to investigate the amplification effects in the city and to support the microzoning activities in verifying both geological profiles and 1D numerical modeling of the seismic response of the city. The conventional spectral approaches using both microtremor and earthquake data allowed to determine the fundamental resonance frequencies and the amplification factors within the city respectively. The spatial variability of these quantities can be related to the geological and geomorphologic characteristics of the investigated area. A comparison between the network data and the data recorded by the two strong motion instruments installed in the city was also made. This allows verifying the relative response of the accelerometric stations that recorded in the city the major events of the sequence.     

Moment magnitude (Mw) from hydrophone records of low energy volcanic quakes

Earthquake magnitude calibration using hydrophone records has been carried out at Campi Flegrei caldera, an active area close to the highly populated area of Naples city, partly undersea. Definite integrals of the hydrophone records amplitude spectra, between the limits of 1 and 20 Hz, were calculated on a set of small volcano-tectonic earthquakes with moment magnitudes ranging from 1 to 3.3. The coefficients of a linear relationship between the logarithm of these integrals and the magnitude were obtained by linear optimization, thus defining a useful equation to calculate the moment magnitude from the hydrophone record spectra. This method could be easily exported to other volcanic areas, where submerged volcanoes are monitored by networks of hydrophones and seismic sensors on land. The proposed approach allows indeed magnitude measurements of small magnitude earthquakes occurring at sea, thus adding useful information to the seismicity of these volcanoes.

     

Strength and Compressibility Characteristics of a Soft Clay Subjected to Ground Treatment

The compressibility properties, undrained shear strength, and stress history are essential for reliable calculations of settlement and bearing capacity of soft soils. However, it is sometimes a challenge to determine representative parameters for very soft and high plasticity clays, which are often found in Brazilian coastal areas. In this study an extensive site investigation was planned aiming to interpret the behaviour of a trial embankment on stabilized soft ground. The site investigation was carried out in a test area located in the west of city of Rio de Janeiro, consisted of three clusters in which standard penetration tests, vane shear tests, and piezocone tests (CPTu) were performed. A number of correlations was developed and compared with empirical equations in order to verify their reliability. The results of these tests made it possible to define geotechnical parameters of the soft clay to use in the numerical and analytical computations of the embankment on reinforced ground.     

Chemostratigraphy of lava sequences from the Rio Itapicuru Greenstone Belt,Bahia State,Brazil

The Rio Itapicuru greenstone terrain of north-central Bahia State consists of belts of supracrustal rocks surrounding granitic plutons and domes. The basal supracrustal rocks are predominantly massive metabasalts with minor amounts of intercalated chemical sedimentary rocks and mafic tuffs. They are overlain by a middle unit of intermediate to acid pyroclastic rocks, lavas, and volcaniclastic sediments, and an upper unit of greywackes, sandstones and conglomerates.A geochemical study of major and trace elements of the volcanic rocks indicates the existence of a chemical discontinuity between the basaltic and the acid to intermediate members. The basalts are typical tholeiites with Ti, Zr, Sr, Y and Nb contents analogous to those of modern ocean-floor tholeiites or, alternatively, low-K tholeiites of primitive island arcs. In contrast, compositional variations of the hornblende-bearing andesites and dacites fall along indisputably calc-alkaline trends of low FeO and TiO₂ contents which decrease with increasing differentiation. The lithostratigraphic and chemical variations within lavas of the Rio Itapicuru greenstone are comparable to those described from the Western Australian greenstone belts. Only in greenstone belts of the Canadian type do thick calc-alkaline sequences containing abudant basaltic andesites overlie conformably and transitionally the underlying tholeiitic basalts. Elsewhere the calc-alkaline sequences, if present, do not contain basaltic andesites and are chemically unrelated to the underlying basalts.