Characteristics of photosynthetic pigment composition ofGymnodinium mikimotoi Miyake etKominami exOda

Gymnodinium mikimotoi, a senior synonym ofGymnodinium nagasakiense often causes red tides in coastal waters of the western part of Japan. The photosynthetic pigment composition of two strains ofG. mikimotoi were analyzed by HPLC. They contain chlorophyllc ₃ which has not been reported from dinoflagellates. They also contain fucoxanthin, 19'-hexanoyloxyfucoxanthin and 19'-butanoyloxyfucoxanthin as major carotenoides, which are anomalous in dinoflagellates. The pigment composition ofG. mikimotoi is compared with that ofGyrodinium aureolum which occur in European waters and is thought as a conspecific species withG. mikimotoi by several authors.     

日本(虫寻)和底栖短桨蟹线粒体DNA 12SrRNA基因序列的初步研究

以相应引物对日本和底栖短桨蟹的线粒体 DNA1 2 S r RNA基因片段进行了 PCR扩增和序列测定 ,分析比较了 2种间序列差异。结果表明 :日本 1 2 S r RNA基因片段长度为 41 4 bp,底栖短桨蟹为 41 5bp,2种的 A,T,G,C含量分别为 1 51 bp(36.47% ) ,1 53bp(36.96% ) ,43bp(1 0 .39% ) ,67bp(1 6.1 8% )和 1 50 bp(36.1 4 % ) ,1 55bp(37.35% ) ,44bp(1 0 .60 % ) ,66bp(1 5.90 % )。 2种间共出现了 3个碱基的缺失 /插入和 38bp的序列差异 ,其碱基转换与碱基颠换比约为 2 .1 7。     

Sr and Nd isotope compositions of atmospheric mineral dust at the summit of Mt. Sefuri, north Kyushu, southwest Japan: A marker of the dust provenance and seasonal variability

We analyzed Rb-Sr-Nd isotope ratios of mineral dust in total aerosol load collected with rainwater continuously from 1998 to 2006 at the summit of Mt. Sefuri, northern Kyushu, southwestern Japan. During this period, the total mass of the dust generally increased in late winter, peaked in early spring, and then decreased.⁸⁷Sr/⁸⁶Sr in atmospheric mineral dust varied from 0.7096 to 0.7180, and εNd(0)_CHUR from −19.9 to −3.5. During heavy deposition periods, the dust had high ⁸⁷Sr/⁸⁶Sr isotope ratios and low to middle εNd(0)_CHUR values, respectively. These compositions are comparable to those of sand and loess in arid areas of Northeast China, Takla Makan and Western Beijing. Such particles were transported by westerlies from those areas to northern Kyushu in winter and spring. In summer and autumn, the isotopic compositions of the dust varied greatly; however, during light deposition periods, the Sr isotope composition was low. In these seasons, the contributions to the dust from Japanese soils and volcanic ash, transported by southern winds, were relatively larger than in winter and spring because of decreased mineral dust particle transport from the continent. Nevertheless, fine sandy desert particles and loess in general accounted for most mineral dust deposition in northern Kyushu year-round, even in summer. Local soils derived from weathered granite and volcanic ash were minor components only.The net mass of water-insoluble inorganic matter in the collected mineral dust fluctuated from year-to-year; deposition on Mt. Sefuri was relatively large before 2001, decreased from 2002 to 2005, and increased greatly in spring 2006. These year-to-year differences probably reflected changes in the strength of the westerlies and in climate conditions in the arid source areas.     

Adjustment processes of mountainous rivers affected by tilting uplift: Laboratory experiments and a case study of Yakushima Island,Japan

Mountainous river basins are one of the main sources of sediment. Over long time scales, sediment production is sustained by the persistent dissection of river basins, which is promoted by tectonic activity. The response or adjustment of rivers to forcing factors such as uplift is based on the concept of the graded river and a feedback mechanism between the incision and uplift. Although the development of graded rivers under natural circumstances has been discussed for a long time, knowledge about the transition of river basins under heterogeneous uplift is not enough. To understand the development of a river basin with a non‐uniform uplift rate, two simple cases are examined: landward and seaward tilting uplift, where the uplift rate varies linearly in space. For our study, laboratory experiments were conducted and the results were compared with those of natural river basins; two river basins in Yakushima Island were selected for this purpose. In both the laboratory and Yakushima, the longitudinal profile of the river basin under landward‐tilting uplift has a convex‐up zone and a specific knickpoint is formed at the upstream end of this zone. This knickpoint is inactive with respect to migration and incision owing to the insufficient cumulative uplift to the equilibrium state. It was also observed in both the experimental and natural cases that the profile of the river basin under seaward tilting is unlikely to have such a convex‐up zone in the long term, and will instead have a smooth concave profile. Therefore, the spatiotemporal pattern of dissection differs depending on the type of tilting uplift, which suggests that sediment production also varies in time and space according to the type of uplift.     

Study on a failed dip slope with a thin sandy layer in 2004 Niigata-ken Chuetsu Earthquake

Among the extensive failed slopes in the 2004 Niigata-ken Chuetsu Earthquake, Japan, a dip slope at Yokowatashi, Ojiya, was investigated intensively. The sliding plane was along a weak thin tuff sandy layer which had been deeply weathered. Triaxial compression tests and plane strain compression tests were performed on undisturbed specimens obtained by block sampling and boring sampling to evaluate the strength that was mobilized on the sliding plane. Stability analysis based on the test results reveals that, at normal time, without earthquake and without an extremely high groundwater level, the slope is stable. Furthermore, the calculation of earthquake-induced displacement provides a reasonable simulation of the failure of this slope.     

Simplified technique for the rapid determination of phytoplankton pigments by reverse-phase high-performance liquid chromatography

A simplified technique for the rapid analysis of photosynthetic pigments in marine phytoplankton is described. The pigments extracted in N,N-dimethylformamide (DMF) are injected directly into the reverse-phase high-performance liquid chromatograph fitted with a photodiode array detector. We developed a new stepwise program; that is methanol-water (7525 v/v), methanol, methanol-acetone (8020) and methanol-acetone (6535). This program gives a good separation of at least 13 carotenoids, and 10 chlorophylls and their derivatives, completed within 20 min. The quantitative precision is high; the maximum standard error was less than 6%. The stability of pigments in DMF were also considered for application of this technique to the lab work on board the ship.     

Spin Temperature of Ammonia Determined from NH2 in Comet C/2001 A2 (LINEAR)

The ortho-to-para ratio (OPR) of a cometary molecule is one of primordial character in comets. The OPR which is characterized by a spin temperature, is thought to reflect the formation conditions of the molecule. In this paper we show the high-dispersion spectrum of cometary NH₂ in Comet C/2001 A2 (LINEAR), from which the OPR of NH₂ is determined based on the fluorescence excitation model. Since the NH₂ is a photodissociation product of cometary ammonia, we applied the permutation group theory to the whole reaction system (i.e. the photodissociation reaction of ammonia to NH₂ and H) in order to derive the OPR of ammonia from that of NH₂. The derived OPR of ammonia is 1.12 ± 0.03 in Comet C/2001 A2 (LINEAR). This value corresponds to a spin temperature of 30⁺³ _-2 K. If this reflects the temperature where the comet formed in the protosolar nebula, our result indicates that thiscomet was formed in the region of the giant planets between Jupiter and Neptune.     

Growth of twinned magnetic crystals in talc and talc-magnesite rock at Torika,Nagasaki Prefecture,Japan

Spinel-type twins of magnetite in a talc rock and a talk-magnesite rock at Torika, Nagasaki Prefecture, Japan have been studied by means of optical microscopy, differential interference microscopy, microprobe analysis and size distribution analysis. The growth processes are discussed in detail. The number of magnetite twins in the talc-magnesite rock is larger than in the talc rock, and the percentage of the frequency number increases rapidly with increase in grain size. It is suggested that magnetite crystals in the talc-magnesite rock have grown by rapid crystallization in the earlier stage and by a layer-growth mechanism in the later stage in the carbonation-dehydration reaction that occurred within the rock. As large number of twin nuclei formed by rapid crystallization in the earlier stage of magnetite formation. As the dehydration reaction proceeded, the number of twin nuclei gradually decreased with the lowering of supersaturation by addition of some water. Magnetite crystals in the talc rock formed after talc crystallization by silicification and dehydration reactions in the process of steatitization. The twin nuclei here must have formed with difficulty, governed by the distribution of talc which crystallized before the magnetite and at relatively low supersaturation.     

Diffuse bifurcations engraving diverse shear bands in granular materials

Shear bands with characteristic spatial patterns observed in an experiment for a cubic or parallelepiped specimen of dry dense sand were simulated by numerical bifurcation analysis using the Cam‐clay plasticity model. By incorporating the subloading surface concept into the plasticity model, the model became capable of reproducing hardening/softening and contractive/dilative behavior observed in the experiment. The model was reformulated to be compatible with the multiplicative hyperelasto‐plasticity for finite strains. This enhanced constitutive model was implemented into a finite‐element code reinforced by a stress updating algorithm based on the return‐mapping scheme, and by an efficient numerical procedure to compute critical eigenvectors of elastoplastic tangent stiffness matrix at bifurcation points. The emergence of diamond‐ and column‐like diffuse bifurcation modes breaking uniformity of the materials, followed by the evolution of shear bands through strain localization, was observed in the analysis. In the bifurcation analysis of plane strain compression test, unexpected bifurcation modes, which broke out‐of‐plane uniformity and led to 3‐dimensional diamond‐like patterns, were detected. Diffuse bifurcations, which were difficult to observe by experiments, have thus been found as a catalyst creating diverse shear band patterns.