An occurrence of ardennite in quartz veins in piemontite schist,Western Otago,New Zealand

Summary Ardennite of complex composition: (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916916 Fe³⁺ _0.165 Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 occurs in crack-seal quartz veins in quartz-albite-piemontite-spessartine-phengitehematite-chlorite-rutile-tourmaline ± calcite schist of the Haast Schist Group near Arrow Junction, western Otago, New Zealand. The Mn²⁺/Mn³⁺-ratio is sensitive to calculations and to accuracy of analyses. Boron is detected in ardennite for the first time. Other properties include = 1.734(3), = 1.735(3), = 1.751(3), 2V_Z = 30(2)°;a = 8.721(1),b = 5.816(1),c = 18.545(3) Å,V = 940.7(2) ų. Associated mineral phases are spessartine, hematite, piemontite containing 0.7% SrO and 0.06% PbO, and phengite. Later-stage vein minerals comprise chlorite, albite, and manganoan calcite which were deposited under less highly oxidizing conditions. Digenite with minor intergrown covellite occurs in small amount with manganoan calcite and quartz in a cross-cutting late-stage veina chalcopyrite and native copper occur in other late-stage veins. Arsenic and other components of the ardennite and associated minerals are derived from highly oxidized ferromanganese oxide- and hydroxide-bearing siliceous pelagic sediments that formed the protolith for the piemontite schist. The veins formed at a relatively early stage after metamorphism peaked in the chlorite zone of the greenschist facies under conditions that have been estimated at about 4.5 kbar, 390 °C.

---

Vorkommen von Ardennit in Quarzgängen aus Piemontit-Schiefern, West-Otago, Neuseeland

Zusammenfassung Ardennit mit der Zusammensetzung (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916Fe³⁺ _0.165Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 tritt in Crack-seal-Quarzgängen in Quarz-Albit-Piemontit-Spessartin-Phengit-Hämatit-Chlorit-Rutil-Turmalin ± Calcit-Schiefern der Haast Schiefer-Gruppe nahe der Arrow Junction, West-Otago, Neuseeland, auf. Die Proportionen von Mn²⁺/Mn³⁺ hängen von der Kalkulation und der Genauigkeit der Analyse ab. Bor wird zum ersten Mal im Ardennit bestimmt. Andere Eigenschaften sind: = 1.734(3), = 1.735(3), = 1.751(3), 2Vz = 30(2)°; a = 8.721(1), b = 5.816(1), c = 18.545(3) Å, V = 940.7(2) Å3. Assoziierte Mineralphasen sind Spessartin, Hämatit, Piemontit, der 0.7% SrO und 0.06% PbO enthält und Phengit. Spät gebildete Gangmineralien, wie Chlorit, Albit und Mn-Calcit, sind unter geringer oxidierenden Bedingungen entstanden. Digenit mit etwas Covellin tritt in kleinen Mengen zusammen mit Mn-Calcit und Quartz in einem querschlägigen Gang auf, Chalcopyrit und gediegenes Kupfer kommen in anderen späten Gängen vor. Arsen und andere Komponenten des Ardennites and der assoziierten Minerale können von hochoxidierten, Fe-Mn-Oxid- und Hydroxyd-führenden, Sireichen, pelagischen Sedimenten hergeleitet werden, die das Ausgangsgestein für den Piemontit darstellen. Die Gänge wurden in einem relativ frühen Stadium, nach dem Metamorphosehöhepunkt, innerhalb der Chloritzone der Grünschiefer-Fazies, unter ungefähr 4.5 kbar und 390°C, gebildet.

---

---

With 4 Figures     

Petrogenesis of the Greenhills Complex,Southland, New Zealand: magmatic differentiation and cumulate formation at the roots of a Permian island-arc volcano

A Permian (~265 Ma) intrusive complex which formed as a magmatic feeder reservoir to an immature island-arc volcano is fortuitously exposed in southern New Zealand. Known as the Greenhills Complex, this intrusion was emplaced at shallow crustal levels and consists of two layered bodies which were later intruded by a variety of dykes. Cumulates, which include dunite, olivine clinopyroxenite, olivine gabbro, and hornblende gabbro-norite, are related products of parent-magma fractionation. Both primary (magmatic) and secondary platinum-group minerals occur within dunite at one locality. Using the composition of cumulus minerals, mafic dykes and melt inclusions, we have determined that the parent magmas of the complex were hydrous, low-K island-arc tholeiites of ankaramitic affinities. Progressive magmatic differentiation of this parent magma generated fractionated melt of high-alumina basalt composition which is now preserved only as dykes which cut the Complex. Field evidence and cumulus mineral profiles reveal that the magma chambers experienced turbulent magmatic conditions during cumulate-rock formation. Recharge of the chambers by primitive magma is likely to have coincided with eruption of residual melt at the surface. Similar processes are inferred to account for volcanic-rock compositions in other parts of this arc terrane and in modern island-arc systems.     

Platinum mineralisation potential of the Longwood Igneous Complex,New Zealand

Summary The Longwood Igneous Complex is situated at the southern tip of the South Island of New Zealand. The Complex is 32 km long and up to 12 km wide and is part of a more extensive north-trending belt of late Paleozoic volcanic, volcaniclastic and intrusive rocks.The complex is comprised of an extensive series of layered gabbros (Pahia Layered Series) together with diorites, trondjhemite and granitoids.Exploration by Sigma Resources has located significant platinum-in-drainage anomalies which are derived from a 10 km x 1 km area of largely plagioclase-rich, olivinebearing cumulate rocks within the Pahia Layered series. Grains of platinum and palladium sulphide, arsenide and alloy minerals have been identified in placer deposits derived from this area. A total of 1,500 ounces of platinum was reported to have been recovered as a by-product of historic placer gold mining of these deposits. Platinumgroup element mineralisation in float rocks (up to 3.0 ppm Pt and 3.3 ppm Pd) and significant platinum-in-soil anomalies (peak value 0.47 ppm Pt) have been found within this area.The mineralised troctolite and olivine-gabbro float and adjacent exposures are broadly similar to the anorthosite-troctolite-olivine gabbro zones within the Banded Series of the Stillwater Complex. The mineralised rocks are leucocratic plagioclaseolivine adcumulates with minor clinopyroxene oikocrysts, primary amphibole and sparse (<0.5%) sulphide. Sulphide minerals are pyrrhotite, chalcopyrite, pyrite and secondary copper sulphides. The similarity of this mineralisation style and its host rocks to the JM Reef of the Stillwater Complex and AP and PV mineralisation of the Penikat Intrusion highlights the excellent potential for discovery of a large stratiform platinumgroup element deposit in the Pahia Layered Series.

---

Das Platin Mineralisations Potential des Longwood Komplexes, Neuseeland

Zusammenfassung Der Longwood Igneous Complex liegt au der Südküste der der Südinsel Neuseelands. Er ist 32 km lang und 12 km breit und ist Teil eines Nord-Süd verlaufenden Gesteinsgürtels paläozoischer vulkanischer, vulkano-klastischer und intrusiver Gesteine. Der Komplex beinhaltet geschichtete Gabbros (Pahia Layered Series) gemeinsam mit Dioriten, Trondjhemiten und Granitoiden.Bedeutende Platinanomalien in Bachsedimenten, die aus einem ca. 10 x 1 km großen Gebiet mit Plagioklas-reichen, Olivin-führenden Kumulat-Gesteinen stammen, wurden von Sigma Resources lokalisiert. Platin- und Palladiumsulfide, -arsenide und -Legierungen wurden in Seifenlager-stätten, in diesem Gebiet nachgewiesen. Insgesamt wurden 1500 Unzen Platin während der historischen Bergbautätigkeit auf Gold in diesen Lagerstätten als Nebenprodukt gewonnen. PGE-Mineralisation (bis 3.0 ppm Pt und 3.3 ppm Pd) in Geschieben und bedeutende Pt-Bodenanomalien (max. 0.47 ppm Pt) wurden in diesem Gebiet entdeckt.Die mineralisierten Troktolit- und Olivin-Gabbro-Gerölle und benachbarte Aufschlüsse zeigen weitgehende Ähnlichkeit mit der Anorthosit-Troktolit-Olivin-GabbroAbfolge der Banded Series des Stillwater Komplexes.Die mineralisierten leukokraten Gesteine führen Plagioklas und Olivin als Kumulusphasen sowie untergeordnet Klinopyroxene, primäre Amphibole und geringe Mengen (< 0.5 %) an Sulfiden. Als Sulfide kommen Magnetkies, Kupferkies, Pyrit und sekundäre Kupfersulfide vor. Die Ähnlichkeit dieser Mineralisation und ihrer Nebengesteine mit dem JM Reef des Stillwater Komplexes und der AP und PV Mineralisation in der Penikat Intrusion läßt die Pahia Layered Series als geeignetes Gebiet für die Entdeckung großer stratiformer PGE-Lagerstätten erscheinen.

---

---

With 5 Figures     

Ground water flow analysis of a mid-Atlantic outer coastal plain watershed, Virginia, U.S.A

Models for ground water flow (MODFLOW) and particle tracking (MODPATH) were used to determine ground water flow patterns, principal ground water discharge and recharge zones, and estimates of ground water travel times in an unconfined ground water system of an outer coastal plain watershed on the Delmarva Peninsula, Virginia. By coupling recharge and discharge zones within the watershed, flowpath analysis can provide a method to locate and implement specific management strategies within a watershed to reduce ground water nitrogen loading to surface water. A monitoring well network was installed in Eyreville Creek watershed, a first-order creek, to determine hydraulic conductivities and spatial and temporal variations in hydraulic heads for use in model calibration. Ground water flow patterns indicated the convergence of flow along the four surface water features of the watershed; primary discharge areas were in the nontidal portions of the watershed. Ground water recharge zones corresponded to the surface water features with minimal development of a regional ground water system. Predicted ground water velocities varied between < 0.01 to 0.24 m/day, with elevated values associated with discharge areas and areas of convergence along surface water features. Some ground water residence times exceeded 100 years, although average residence times ranged between 16 and 21 years; approximately 95% of the ground water resource would reflect land use activities within the last 50 years.     

Scientific field training for human planetary exploration

Forthcoming human planetary exploration will require increased scientific return (both in real time and post-mission), longer surface stays, greater geographical coverage, longer and more frequent EVAs, and more operational complexities than during the Apollo missions. As such, there is a need to shift the nature of astronauts’ scientific capabilities to something akin to an experienced terrestrial field scientist. To achieve this aim, the authors present a case that astronaut training should include an Apollo-style curriculum based on traditional field school experiences, as well as full immersion in field science programs. Herein we propose four Learning Design Principles (LDPs) focused on optimizing astronaut learning in field science settings. The LDPs are as follows:

(1)

LDP#1: Provide multiple experiences: varied field science activities will hone astronauts’ abilities to adapt to novel scientific opportunities

(2)

LDP#2: Focus on the learner: fostering intrinsic motivation will orient astronauts towards continuous informal learning and a quest for mastery

(3)

LDP#3: Provide a relevant experience—the field site: field sites that share features with future planetary missions will increase the likelihood that astronauts will successfully transfer learning

(4)

LDP#4: Provide a social learning experience—the field science team and their activities: ensuring the field team includes members of varying levels of experience engaged in opportunities for discourse and joint problem solving will facilitate astronauts’ abilities to think and perform like a field scientist.

The proposed training program focuses on the intellectual and technical aspects of field science, as well as the cognitive manner in which field scientists experience, observe and synthesize their environment. The goal of the latter is to help astronauts develop the thought patterns and mechanics of an effective field scientist, thereby providing a broader base of experience and expertise than could be achieved from field school alone. This will enhance their ability to execute, explore and adapt as in-field situations require.     

Delivering the two degree global climate change target using a flexible ratchet framework

Global climate negotiations have been characterized by a divide between developed and developing nations – a split which has served as a persistent barrier to international agreement within the United Nations Framework Convention on Climate Change process. Notable progress in bridging this division was achieved at the 21st Conference of the Parties meeting in Paris through the introduction of Intended Nationally Determined Contributions (INDCs). However, the collective ambition of submitted INDCs falls short of a global 2°C target, requiring an effective ratchet mechanism to review and increase national commitments. Inequitable distribution of additional responsibilities risks re-opening historic divisions between parties. This article presents a flexible ratchet framework which shares mitigation commitments on the basis of per capita equity in line with emerging requirements for a 2°C target. The framework has been designed through convergence between developed and developing nations; developed nation targets are based on an agreed standardized percentage reduction wherever emissions are above per capita equity; developing nations are required to peak emissions at or below per capita equity levels by an agreed convergence date. The proposed framework has the flexibility to be integrated with current INDCs and to evolve in line with shifting estimates of climate sensitivity.

Policy relevance

The outcome of the 21st Conference of the Parties (COP21) negotiations in Paris offered mixed results in terms of level of ambition and submitted national commitments. A global agreement to keep average global temperature rise below two degrees was maintained; however, current pledged Intended Nationally Determined Contributions (INDCs) are projected to result in an average warming of close to three degrees. The implementation of a global ratchet mechanism to scale-up national commitments will remain key to closing this ambition gap to reach this two degree target. How this upscaling of responsibility is shared between parties will be a defining discussion point within future negotiations. This study presents a standardized, equity-based framework for how this ratchet mechanism can be implemented – a framework designed to be flexible for evolution in line with better understanding of climate sensitivity, and adaptable for integrations with current INDC proposals.     

The hydrodynamic response of the York River estuary to Tropical Cyclone Isabel, 2003

Hurricane Isabel made landfall along the North Carolina coast on September 18, 2003 (UTC 17:00) and the storm surge exceeded 2.0 m in many areas of the Chesapeake Bay and in the York River estuary. River flooding occurred subsequently, and the peak river discharge reached 317 and 104 m³ s⁻¹ in the Pamunkey and Mattaponi rivers, respectively. The York River estuary experienced both storm surge and river flooding during the event and the estuary dynamics changed dramatically. This study investigates the hydrodynamics of the York River estuary in response to the storm surge and high river inflows. A three-dimensional model was used to investigate the changes of estuarine stratification, longitudinal circulation, salt flux mechanisms, and the recovery time required for the estuary to return to its naturally evolved condition without the storm. Results show that the salt flux was mainly caused by advection, which was induced by the barotropic gradient during the storm event. The net salt flux increased by a factor of 30 during the rise of the storm surge. However, the large amount of salt transported into the estuary was quickly transported out of the estuary as the barotropic gradient reversed during the descent of the storm surge. Subsequent high freshwater inflow influenced the estuarine circulation substantially. The estuary changed from a partially mixed estuary to a very stratified estuary for a prolonged period. The model results show that it will take about 4 months for the estuary to recover to its naturally evolved salinity distribution after the impacts of the storm surge and freshwater pulse.     

冲绳海槽浮岩的高温高压纵波速度

对采自冲绳海槽中部海底的浮岩样品和邻近陆地樱岛火山的安山岩样品进行了温度 (常温 - 15 0 0℃ )与压力 (常压 - 2 .4 GPa)实验 ,测得在较低温度 -压力条件下 (<1GPa,<80 0℃ )浮岩样品的纵波速度小于安山岩样品的纵波速度 ,在较高温度 -压力条件下 (>1GPa,>80 0℃ )二者的纵波速度接近一致 (5 .9km /s)。 1GPa/80 0℃是浮岩样品和安山岩样品的热动力相变点 ,推测该点的深度大于 18km。     

Compositional variations and morphological evolution in platinum beach placers, southern New Zealand

Morphologies of placer platinum group minerals (PGM) are more variable and resistant to modification during transport than placer gold grains. This study documents morphological evolution of PGM placer grains during up to 120 km of transport in beach placers after river transport from inferred sources up to 200 km inland. PGM morphological changes are calibrated with changes in morphology of associated placer gold. Most of the PGM are Pt-Fe alloy and have been fed into the beach placer system from a large river at the western end of the beaches on the south coast of New Zealand. The incoming fluvial PGM suite includes Os, Ir and Ru alloys which may have been derived from distal ophiolitic sources. More proximal sources have Ural-Alaskan affinities and these contributed cooperite and braggite, or sperrylite, locally, as well as Pt-Fe alloy grains. Some PGM may have been recycled through Cretaceous-Quaternary fluvial sediments before entering the modern placer system. Recycled placer PGM grains have also been derived from elevated Quaternary beaches near the coastline. PGM grains entering beach placers have rough surfaces, with remnants of crystal faces, and these evolve to smooth flakes with progressive long-shore transport. PGM flakes have slightly thickened rims caused by impacts by saltating sand on windy beaches, and the most distal beach placers contain flakes with incipient toroidal shapes. These PGM incipient toroids are poorly developed compared to accompanying well-formed toroidal gold that has developed in nearly all beach placers, including those on elevated Quaternary beaches. Typical PGM and gold placer grain size decreases with increasing distance of transport, from fluvial grain size of 400–1,000 to ～200 microns on the most distal beaches, accompanied by eastward loss of equant PGM grains and associated increase in proportion of flakes. Although net transport distance is ～120 km in the beach placer complex, frequent aeolian transport of grains from beach to dunes and subsequent recycling by storm surges substantially increased total transport distance in a dynamic windy tectonic environment.