Geochemistry and Intrusive History of the Ashland Pluton, Klamath Mountains, California and Oregon

The Ashland pluton is a calc-alkaline plutonic complex thatintruded the western Paleozoic and Triassic belt of the KlamathMountains in late Middle Jurassic time. The pluton comprisesa series of compositionally distinct magma pulses. The oldestrocks are hornblende gabbro and two-pyroxene quartz gabbro withinitial ⁸⁷Sr/⁸⁶Sr = 0{dot}7044, ¹⁸O = 8{dot}7%, and REE patternswith chondrite normalized La/Lu = 7. These units were followedby a suite of tonalitic rocks (La_N/Lu_N = 7) and then by a suiteof K₂O- and P₂O₅ rocks of quartz monzodioritic affinity (La_N/Lu_N= 13–21; La_N/Sm_N = 2{dot}4–3{dot}) The quartz monzodioriticrocks were then intruded by biotite granodiorite and granitewith lower REE abundances but more fractionated LREE(La_N/Lu_N= 13–19; La_N/Sm_N = 4{dot}3–6 and they, in turn,were host to dikes and bosses of hornblende diorite. The latestintrusive activity consisted of aplitic and granitic dikes.Combined phase equilibria and mineral composition data, indicateemplacement conditions of approximately P_total = 2{dot}3kb,P_H2O between 1{dot}5 and 2{dot}2 kb, and f_O2 between the nickel-nickeloxide and hematite-magnetite buffers. Successive pulses of magma display increasing SiO₂ togetherwith increasing ¹⁸O and decreasing initial ⁸⁷Sr/⁸⁶Sr. The isotopicdata are consistent with either (1) combined fractional crystallizationof andesitic magma and concurrent assimilation of crustal materialcharacterized by low Sr₁ and high (¹⁸O or, more probably, (2)a series of partial melting events in which sources were successivelyless radiogenic but richer in ¹⁸O Each intrusive stage displaysevidence for some degree of crystal accumulation and/or fractionalcrystallization but neither process adequately accounts fortheir compositional differences. Consequently, each stage appearsto represent a distinct partial melting or assimilation event. The P₂O₅-rich nature of the quartz monzodiorite suite suggestsaccumulation of apatite. However, the suite contains abundantmafic microgranitoid enclaves and most apatite in the suiteis acicular. These observations suggest that magma mixing affectedthe compositional variation of the quartz monzodiorite suite.Mass balance calculations are consistent with a simple mixingprocess in which P₂O₅-rich alkalic basalt magma (representedby the mafic microgranitoid enclaves) was combined with a crystal-poorfelsic magma (represented by the tonalite suite), yielding aquartz monzodioritic magma that then underwent differentiationby crystal fractionation and accumulation.     

EFFECT OF SNOW FENCE HEIGHT ON WIND SPEED

Abstract

Accumulations of snow behind fences may increase the water yield in windswept areas. The efficiency of snow collection depends on the reduction in wind speed in the lee of the fence. Wind speeds have been measured to windward and to leeward of vertical slat fences from 6 to 16 ft. high. The down-wind measurements were made at distances of 2.5H, 5H and 10H from the fence where H is the height of the fence. Speed measurements at various levels were integrated up to the height of the fence and the percentage reduction in wind speed was calculated. Expressions are given for the velocity reduction factor at distances down-wind of fences having a bottom gap, and for the cross-sectional area of a fully developed drift.     

Erg deposits in the Lower Jurassic Wingate Sandstone, northeastern Arizona: oblique dune sedimentation

The Lower Jurassic erg (aeolian sand sea) deposits of the Wingate Sandstone on the Colorado Plateau are beautifully exposed near Many Farms, Arizona. These 3-D outcrops allow a detailed study of structures and sequenses in the erg body. The erg sequence comprises chiefly oblique dune deposits. The dune facies are in most cases characterized by a well-developed tripartite upbuilding. Each dune coset contains unusually thick and intricate bottomsets, medial low-angle dipping toesets, and upper steeply dipping foresets. The foresets reveal significant across-crest transport of sand and dip within a narrow range of directions towards the ESE. The bottomset beds are composed of compound cross-bedding that documents strong along-crest transport towards the SSW, whereas the toeset beds reveal upslope, downslope, and along-crest transport of sand. The ancient dunes apparently formed in a directionally varying wind flow with prevailing winds (early summer) from the NW and periodic strong winds (late summer) from the SW. The dunes were oblique not only to seasonal transport directions, but also to the resultant annual transport direction and dune migration direction. This was caused by the interaction of the dune system with the primary winds which resulted in secondary airflow and significant along-crest transport of sand. The erg deposits at Many Farms are separated by a number of super bounding surfaces suggesting several episodes of erg formation and destruction. The initial erg system was dominated by transverse dunes, but overlying ergs only contained oblique dunes. All erg systems were bounded to the SW by wide regions of erg margin environments in which aeolian sand sheet, fluvial, and lacustrine facies were deposited. Even though fluvial deposits are absent from the main part of the sequence at the study area, the effects of this system are reflected within the erg deposits at Many Farms.     

Peridotite Melting at 1 GPa: Reversal Experiments on Partial Melt Compositions Produced by Peridotite-Basalt Sandwich Experiments

One of the goals of igneous petrology is to use the subtle andmore obvious differences in the geochemistry of primitive basaltsto place constraints on mantle composition, melting conditionsand dynamics of mantle upwelling and melt extraction. For thisgoal to be achieved, our first-order understanding of mantlemelting must be refined by high-quality, systematic data oncorrelated melt and residual phase compositions under knownpressures and temperatures. Discrepancies in earlier data onmelt compositions from a fertile mantle composition [MORB (mid-oceanridge basalt) Pyrolite mg-number 87] and refractory lherzolite(Tinaquillo Lherzolite mg-number 90) are resolved here. Errorsin earlier data resulted from drift of W/Re thermocouples at1 GPa and access of water, lowering liquidus temperatures by30–80°C. We demonstrate the suitability of the ‘sandwich’technique for determining the compositions of multiphase-saturatedliquids in lherzolite, provided fine-grained sintered oxidemixes are used as the peridotite starting materials, and thechanges in bulk composition are considered. Compositions ofliquids in equilibrium with lherzolitic to harzburgitic residueat 1 GPa, 1300–1450°C in the two lherzolite compositionsare reported. Melt compositions are olivine + hypersthene-normative(olivine tholeiites) with the more refractory composition producinga lower melt fraction (7–8% at 1300°C) compared withthe model MORB source (18–20% at 1300°C). KEY WORDS: mantle melting; sandwich experiments; reversal experiments; anhydrous peridotite melting; thermocouple oxidation; olivine geothermometry     

Effect of Silica Activity on OH- IR Spectra of Olivine: Implications for Low-aSiO2 Mantle Metasomatism

Hydrogen solubility and hydroxyl substitution mechanism in olivineat upper-mantle conditions are not only a function of pressure,temperature, water fugacity and hydrogen fugacity, but are alsoinfluenced by silica activity. Olivine synthesized in equilibriumwith magnesiowüstite displays hydroxyl stretching bandsin the wavenumber range from 3640 to 3430 cm^–1. In contrast,olivine in equilibrium with orthopyroxene shows absorption bandsin a narrower wavenumber range from 3380 to 3285 cm^–1.The two fundamentally different spectra are assigned to hydroxylin tetrahedral and octahedral sublattices, respectively. Olivinein equilibrium with orthopyroxene is also less capable of incorporatinghydroxyl, relative to olivines in equilibrium with magnesiowüstite,by about a factor of ten. A comparison of spectra obtained aspart of this study with hydroxyl spectra of natural mantle olivinesshows that the latter display hydroxyl stretching patterns reminiscentof equilibrium with magnesiowüstite, although undoubtedlyolivine in the Earth’s mantle coexists with orthopyroxene.This may be attributed to a metasomatic overprint by a low-silicafluid and/or melt that was in reaction relationship with orthopyroxene.A likely metasomatic agent is a carbonatitic melt. When carbonatiticmelts decompose to oxides and CO₂, they may temporarily imposea low-aSiO₂ environment inherited by the olivine structure.If this suggestion proves true, Fourier transform IR spectroscopymay be used to fingerprint metasomatic episodes in the lithosphericmantle. KEY WORDS: FTIR spectrometry; olivine; mantle; metasomatism; water     

THE EAEG'S CHOICE OF UNITS*

The use of MKS system units in preference to the cgs system facilitates accurate numerical calculation in magnetostatic problems in geophysics and the practice of stating the precise dimensions of every unit guards against confusion. Suggestions are made for the unique definition of quantities such as magnetic potential, etc. for which the undesirable circumstance of arbitrary alternatives still persists.     

Experimental Investigation of Eclogite Rheology and Its Fabrics at High Temperature and Pressure

Eclogite plays an important role in mantle convection and geodynamics in subduction zones. An improved understanding of processes in the deeper levels of subduction zones and collision belts requires information on eclogite rheology. However, the deformation processes and associated fabrics in eclogite are not well understood. Incompatible views of deformation mechanism have been proposed for both garnet and omphacite. We present here deformation behaviour of eclogite at temperatures of 1027–1427 °C, confining pressures of 2.5–3.5 GPa, and strain rates of 1 × 10^?5 s^?1 to 5 × 10^?4 s^?1. We obtained a power‐law creep for the high temperature and pressure deformation of a ‘dry’ eclogite (50 vol.% garnet, 40% omphacite and 10% quartz) with A = 10^{3.3 ± 1.0}, n = 3.5 ± 0.4, ΔE =403 ± 30 KJ mol^?1 and ΔV = 27.2 cm³ mol^?1. The two principal minerals of eclogite have greatly different strengths. Progressive increase of garnet results in a smooth increase in strength. Analysis by electron back‐scattered diffraction shows that: (1) garnet displays pole figures with near random distributions of misorientation angle under both dry and wet conditions; (2) omphacite shows pronounced lattice preferred orientations (LPOs), suggesting a dominant dislocation creep mechanism. Further investigation into the water effects on eclogite show: (3) water content does not influence the style of omphacite fabric but increases slightly the fabric strength; (4) grain boundary processes dominate the deformation of garnet under high water fugacity or high shear‐strain conditions, yielding a random LPO similar to that of non‐deforming garnet, despite the strong shape preferred orientation (SPO) observed. {110} [001] slip may dominate the deformation of rutile. Quartz displays complicated and inconsistent LPOs in eclogite. These results are remarkably similar to observations from deformed eclogites in nature.     

Contact Metamorphism of Serpentinite, Chloritic Blackwall and Rodingite at Paddy-Go-Easy Pass, Central Cascades, Washington

The 2 km wide contact aureole produced from serpentinite bythe intrusion of the Mount Stuart Batholith into the IngallsComplex at Paddy-Go-Easy Pass contains the following ultramaficassemblages, in order of increasing grade: serpentine-forsterite-diopside,serpentine-forsterite-tremolite, forsterite-talc, forsterite-anthophyllite,forsterite-enstatite-anthophyllite, forsterite-enstatite-chlorite,forsterite-enstatite-spinel. Associated metarodingites displayfive metamorphic zones, the diagnostic assemblages of whichare, in increasing grade: grossular-idocrase-chlorite, grossular-diopside-chlorite,epidote-diopside-chlorite, epidote-diopside-spinel, plagioclase-grossular-diopside.Mafic hornfels in the aureole contains no orthopyroxene, indicatingthat the conditions of pyroxene hornfels facies were not reached. The breakdown of chlorite is best displayed in aluminous blackwallreaction zones around mafic inclusions in the peridotite. Attemperatures above those of the anthophyllite-out isograd, butwithin the field of forsterite+tremolite, these chlorite-richrocks react to form the assemblage: forsterite-enstatite-spinel.Calculations show that cordierite did not form as a result ofchlorite breakdown in the natural system because impurities,such as iron and chromium, displaced the equilibrium: forsterite+cordierite=enstatite+spinelto much lower pressures than the three kilobars found in thepure system. The primary chromite of the peridotite has been altered to chrome-magnetitein the serpentinite. This alteration seems to be isochemicalover the whole rock, as true chromite, formed by metamorphism,occurs at grades above that of the forsterite-enstatite-anthophylliteassemblage. Calcic amphibole in high-grade metaperidotite is tremolite,even in the presence of aluminous chromite, whereas that inmetamorphosed blackwall rock grades from tremolite into hornblende.The pattern of substitution appears to be: Mg₂Si₃(Na,K)(Al^VI)₂(Al^IV)₃.     

APPLICATION OF A HILBERT TRANSFORM METHOD TO THE INTERPRETATION OF SURFACE-VEHICLE MAGNETIC DATA*

The development of an alkali vapour vehicle borne magnetometer providing very high resolution and a high sampling rate has called for reconsideration of interpretation procedures. With continuous profiling at ground level, the close proximity to near surface structures requires that the precise interpretation of geological boundaries be of paramount importance. Rapid digital recording also demands efficient data processing. Both these requirements can be met by the method described. Essentially the method reduces to a simple Hilbert transform of the magnetic profile. The calculation provides an extremely well defined position of the contact and accurate specification of the dip, strike, depth of overburden, and magnetic susceptibility parameters. Particular advantages are tolerance to high frequency noise, independence from a predetermined origin and baseline, and freedom from subjective judgements.     

FIELD PROCESSING OF MAGNETIC DATA*

This paper deals with the practical problem of processing magnetic data in the field, and it shows how the parameters describing a geological contact can be obtained quickly and conveniently on the basis of five measurements. The complete interpretation can be performed in the field using a programmable calculator. For a small ground-party the method greatly improves the quality of the field-work and the interpretation of the magnetic data. The method has been applied to the data from a magnetic survey over the Mooki Fault (Gunnedah-Manilla, N.S.W.), and the results are discussed as an illustration of the efficacity of the method as a field procedure.