Argon isotopic analysis of breccia veins from the Roter Kamm crater,Namibia, and implications for their thermal history

Abstract— The rocks exposed in the rim of the 2.5‐km‐wide and 3.7‐Ma‐old Roter Kamm crater in southwest Namibia are cut by breccia veins that macroscopically resemble, and were originally described as, pseudotachylytes. The veins were later shown to be cataclasites with no evidence for melting. ⁴⁰Ar/³⁹Ar data for vein and host rock samples indicate a low‐grade metamorphic event at around 300 Ma, but provide no evidence for an impact age. The samples have suffered 5–7% Ar loss, which we associate with the impact event. All the samples record similar ranges of possible time‐temperature conditions and there are no resolvable differences between the results for the vein and the host rock samples, as would be expected if frictional heating played an important role in breccia formation. Modeling the ⁴⁰Ar/³⁹Ar data, assuming instantaneous impact heating followed by extended cooling, and coupling these results to published data on fluid inclusions, quartz precipitation, shock effects, and crater degradation, suggest that the veins reached maximum temperatures of 230–290 °C during impact and never approached melting temperatures of the precursor rocks.     

Basalts from Leg 6 of the Deep-Sea Drilling Project

Basalt was successfully cored at Site 54 in the Parace VelaBasin of the Philippine Sea, and at Site 57 on the CarolineRidge as part of Leg 6 of the Deep Sea Drilling Project. Site54 basalts are altered, but selected major and trace elements,particularly REE allow their characterization as high-aluminaolivine tholeiites, with flat REE patterns, no Eu anomalies,and low dispersed trace-element contents. Basalt from Site 57is distinctly different, with higher TiO₂, P₂O₅, Fe/Mg ratio,and dispersed trace elements, low Ni, Mg, and a strongly fractionatedREE pattern. Derivation by fractionation of transitional basaltis suggested. Varying degrees of alteration of Site 54 basalts has causeddepletion in MgO and addition of Rb, Sr, Ba, Ka₂O, and Na₂O.Mineralogically these changes have resulted in alteration ofolivine and pyroxene, but plagioclase and iron-titanium oxidesremain unaffected. Microprobe data are presented for olivine, clinopyroxene, plagioclase,Fe-Ti oxides, and chrome-spinel in all three basalts. In 54–4,54–8 pyroxenes are zoned from salite to ferroaugite, andshow erratic decrease in A1₂O₃ and TiO₂ with increasing ironcontent. In 57–2, pyroxenes are more magnesian than thosein site 54 basalts, and show an increase in A1₂O₃ and TiO₂ withiron-enrichment. The anomalous behaviour of Al₂O₃ and TiO₂ insome clinopyroxenes, and the close textural relationship ofpyroxene and magnesian olivine in 57–2 basalt, suggestthese minerals are xenocrystic, and were incorporated duringmagma ascent. Spinels of picotite composition in early-formed,and possibly xenocrystic, olivine, and plagioclase crystallizedprior to magma eruption, and may have begun crystallizationwithin the mantle. Site 54 basalts add further confirmation that inter-are basaltsclosely resemble ocean ridge tholeiites, although there is apaucity of data from inter-are environments. Site 57 basaltis chemically and mineralogically distinct from ocean ridgebasalts and may be related to similar volcanics erupted on theCaroline Islands.     

Geochemistry, Petrogenesis and Metallogenesis of the Panzhihua Gabbroic Layered Intrusion and Associated Fe-Ti-V Oxide Deposits, Sichuan Province, SW China

The Panzhihua gabbroic layered intrusion is associated withthe 260 Ma Emeishan Large Igneous Province in SW China. Thissill-like body hosts a giant Fe–Ti–V oxide depositwith 1333 million ton ore reserves, which makes China a majorproducer of these metals. The intrusion has a Marginal zoneof fine-grained hornblende-bearing gabbro and olivine gabbro,followed upward by Lower, Middle, and Upper zones. The Lowerand Middle zones consist of layered melanogabbro and gabbrocomposed of cumulate clinopyroxene, plagioclase, and olivine.These zones also contain magnetite layers. The Upper zone consistschiefly of leucogabbro composed of plagioclase and clinopyroxenewith minor olivine. Most rocks in the body show variable-scalerhythmic modal layering in which dark minerals, primarily clinopyroxene,dominate in the lower parts of each layer, and lighter minerals,primarily plagioclase, dominate in the upper parts. The oxideores occur as layers and lenses within the gabbros and are concentratedin the lower parts of the intrusion. Ore textures and associatedmineral assemblages indicate that the ore bodies formed by verylate-stage crystallization of V-rich titanomagnetite from animmiscible oxide liquid in a fluid-rich environment. The rocksof the Panzhihua intrusion become more evolved in chemistryupward and follow a tholeiitic differentiation trend with enrichmentin Fe, Ti, and V. They are enriched in light rare earth elementsrelative to heavy rare earth elements, and exhibit positiveNb, Ta, and Ti anomalies and negative Zr and Hf anomalies. Thesilicate rocks and oxide ores of the Panzhihua intrusion formedfrom highly evolved Fe–Ti–V-rich ferrobasaltic orferropicritic magmas. The textures of the ores and the abundanceof minor hydrous phases indicate that addition of fluids fromupper crustal wall-rocks induced the separation of the immiscibleoxide melts from which the Fe–Ti–V oxide ore bodiesin the lower part of the intrusion crystallized. KEY WORDS: magnetite; Fe–Ti-rich gabbro; layered intrusion; Panzhihua; SW China     

Impact into unconsolidated,water-rich sediments at the Marquez Dome,Texas

Abstract— The Marquez Dome, Leon County, Texas represents a 13 km diameter Paleocene/Eocene impact structure formed in largely unconsolidated sediments in a near-shore environment. The present study is an analysis of samples from cores taken from boreholes drilled separately on the edge of the central uplift and in the surrounding annular basin. The borehole drilled in the annular basin of the structure penetrated a sequence of interbedded sands, silts, and shales that is typical of the stratigraphy of the surrounding area. In contrast, the borehole drilled on the edge of the central uplift penetrated material that is relatively homogeneous in chemical composition and texture and may represent a mixture of sand, silt, clay, and minor carbonate derived from deeper levels in the preimpact stratigraphy. Veins containing pseudotachylitic breccias are not found and are not expected in this environment because low-strength target materials are not conducive to frictional melting. Similarly, the low strength and unconsolidated nature of these target materials are not conducive to the formation of other types of typical impact breccias (e.g., melt rocks or suevites). The absence of such lithologies results either from explosive ejection of these materials caused by the water-rich character of the target sediments or, more probably, from removal of these materials by deeper postimpact erosion than has been suggested previously. Planar deformation features (PDFs) were not found in quartz grains from any of these samples. The scarcity of quartz grains with PDFs, which have only been reported in rare impact breccias from the central uplift, and the large amount of vertical displacement indicated for the central uplift of this structure may also be a consequence of the low strength of target materials.     

SALTATING PARTICLES,PLAYA CRUSTS AND DUST AEROSOLS AT OWENS (DRY) LAKE,CALIFORNIA

As part of the multinational Lake Owens Dust Experiment (LODE), we have studied the generation of dust storms on the south sand sheet of Owens (dry) Lake, California, an anthropogenically desiccated playa reported to be the single greatest source of particulate matter in North America. During March 1993, we performed an intensive field study including eight significant dust storms, building on our prior work (1978–1984) and preliminary studies (1991–1992). We studied sources and magnitude of coarse saltating particles, the meteorological conditions that allow them to become mobile across the flat playa of Owens (dry) Lake, and how the motion of saltating particles across different types of playa surfaces results in the generation of PM₁₀ dusts (aerosol particles smaller than 10 μm aerodynamic diameter). Saltating grains of lacustrine sand and broken crust abrade and disaggregate the playa surface into fine aerosols, and the resulting PM₁₀ concentrations recorded during major dust storms are among the highest ever recorded in North America. On 23 March 1993, we measured a 2 h concentration on the playa of 40 620 μg m⁻³, as far as we can determine the highest ambient PM₁₀ value ever recorded in the U.S.A. Abrasion of salt-silt-clay crusts by saltation is shown to be responsible for all but a small part of one dust storm. The quantity ‘sand run’, saltating particle transport multiplied by wind run, is shown to be very closely correlated with dust aerosol concentration. Finally, we have established that on-lake bed studies are essential for quantitative prediction of dust events on the Owens (dry) Lake bed, despite the difficult conditions encountered.     

A new look at rifts

Rift valleys have always enthralled geologists. They are the rents in the Earth's crust produced when continental plates pull apart. Besides telling us something about the evolution of our planet, they also act as topographic sumps in which parts of the sedimentary record of Earth history are often best preserved. Yet our understanding of how, where, and why rifts form has only recently come of age with new models of structure and sedimentation.     

The role of landscape setting in minimizing hydrogeomorphic impacts of flow regulation

The Tongariro Power Development Scheme (TPDS) is used to regulate flow in the headwaters of the largest catchment on the North Island of New Zealand (the Waikato). Two small dams, the Rangipo Dam and the Poutu Intake Dam, were constructed in 1973 and 1983. The flow regime of the river is managed to divert freshes into the power scheme, but allows flows larger than 100 m³ s^?1 to be released, to rework and transport sediment through the catchment. Analysis of aerial photos and maps spanning 1928 to 2007, alongside field measurements, show that there have been few hydrogeomorphic adjustments since dam construction. This includes limited changes to channel geometry, channel planform and bed material organization immediately downstream of the dams. In addition, offsite effects are minimal, both 500 m downstream of each dam, and in the more sensitive, less confined reaches in the lower catchment (11 km downstream of the Poutu Intake dam). The limited changes can be attributed to the locations of the dams within reaches characterised by bedrock gorges and confined within terraces. These locations act to flush sediments and impose margins that allow minimal adjustment of the channel. Bed material within this reach is characterised by the presence of a boulder lag. This is sourced from long-term incision into lahar deposits, and acts to limit the rate of incision, creating a steep and stable base upon which active fractions are transported. Just as importantly, significant storage in the low-relief volcanic plateau located in the upper catchment acts to disconnect and store the high sediment yields generated by active volcanic cones in the western sub-catchment upstream of the dams. This limits the rate of sediment supply to regulated reaches. Findings from this study show that analysis of reach-scale controls is essential in framing dam site locations in relation to the distribution of reaches and landscape units across the catchment. In this instance, tributary inputs downstream of the dams do not replenish the sediment and flow removed at the dam locations, as has been observed in other regulated systems. Rather, the river itself is resilient to change and flow variability is well managed allowing geomorphically effective floods to occur. Landscape setting is a key consideration in determining the hydrogeomorphic impact of flow regulation.     

The origin of horizontal laminae in ephemeral stream channel-fill

The number of paired horizontal laminae in an ephemeral channel-fill increases systematically down-catchment from stream headwaters, and is shown to be functionally related to tributary confluence. Under moving storm conditions, each tributary sub-catchment delivers a sediment-laden discharge pulse that finds sedimentary expression in paired laminae of light and heavy minerals. Lamina differentiation is attributed to a congregational sorting mechanism. The direct relationship (r, = 0.903) between paired laminae and confluencing tributaries permits palaeoenvironmental inference of drainage-net character, and palaeoclimatic variability.