GhostNet marine debris survey in the Gulf of Alaska--satellite guidance and aircraft observations

Marine debris, particularly debris that is composed of lost or abandoned fishing gear, is recognized as a serious threat to marine life, vessels, and coral reefs. The goal of the GhostNet project is the detection of derelict nets at sea through the use of weather and ocean models, drifting buoys and satellite imagery to locate convergent areas where nets are likely to collect, followed by airborne surveys with trained observers and remote sensing instruments to spot individual derelict nets. These components of GhostNet were first tested together in the field during a 14-day marine debris survey of the Gulf of Alaska in July and August 2003. Model, buoy, and satellite data were used in flight planning. A manned aircraft survey with visible and IR cameras and a LIDAR instrument located debris in the targeted locations, including 102 individual pieces of debris of anthropogenic or terrestrial origin.     

Marine debris collects within the North Pacific Subtropical Convergence Zone

Floating marine debris, particularly derelict fishing gear, is a hazard to fish, marine mammals, turtles, sea birds, coral reefs, and even human activities. To ameliorate the economic and environmental impact of marine debris, we need to efficiently locate and retrieve dangerous debris at sea. Guided by satellite-derived information, we made four flights north of Hawaii in March and April 2005. During these aerial surveys, we observed over 1800 individual pieces of debris, including 122 derelict fishing nets. The largest debris concentrations were found just north of the North Pacific Transition Zone Chlorophyll Front (TZCF) within the North Pacific Subtropical Convergence Zone (STCZ). Debris densities were significantly correlated with sea-surface temperature (SST), chlorophyll-a concentration (Chla), and the gradient of Chla. A Debris Estimated Likelihood Index (DELI) was developed to predict where high concentrations of debris would be most likely in the North Pacific during spring and early summer.     

冲绳海槽浮岩的高温高压纵波速度

对采自冲绳海槽中部海底的浮岩样品和邻近陆地樱岛火山的安山岩样品进行了温度 (常温 - 15 0 0℃ )与压力 (常压 - 2 .4 GPa)实验 ,测得在较低温度 -压力条件下 (<1GPa,<80 0℃ )浮岩样品的纵波速度小于安山岩样品的纵波速度 ,在较高温度 -压力条件下 (>1GPa,>80 0℃ )二者的纵波速度接近一致 (5 .9km /s)。 1GPa/80 0℃是浮岩样品和安山岩样品的热动力相变点 ,推测该点的深度大于 18km。     

Oil spill detection with fully polarimetric UAVSAR data

In this study, two ocean oil spill detection approaches based on four scattering matrices measured by fully polarimetric synthetic aperture radar (SAR) are presented and compared. The first algorithm is based on the co-polar correlation coefficient, ρ, and the scattering matrix decomposition parameters, Cloud entropy (H), mean scattering angle (α) and anisotropy (A). While each of these parameters has oil spill signature in it, we find that combining these parameters into a new parameter, F, is a more effective way for oil slick detection. The second algorithm uses the total power of four polarimetric channels image (SPAN) to find the optimal representation of the oil spill signature. Otsu image segmentation method can then be applied to the F and SPAN images to extract the oil slick features. Using the L-band fully polarimetric Uninhabited Aerial Vehicle – synthetic aperture radar (UAVSAR) data acquired during the 2010 Deepwater Horizon oil spill disaster event in the Gulf of Mexico, we are able to successfully extract the oil slick information in the contaminated ocean area. Our result shows that both algorithms perform well in identifying oil slicks in this case.     

The interplay between basement fabric,rifting, syn-rift folding,and inversion in the Rio do Peixe Basin,NE Brazil

The Rio do Peixe Basin is part of a series of aborted Cretaceous rifts formed within the Proterozoic Borborema Province, onshore NE Brazil in response to rifting between Africa and South America. The basin is remarkably well-imaged and comprises fault-bounded depocentres, the main ones being the NE-oriented Brejo das Freiras and the E–W-oriented Sousa half-grabens. These grabens and their bounding faults are influenced by Neoproterozoic basement shear zones and present a complex framework of secondary normal faults and folds. Recent workers also interpret large reverse faults and regional post-rift shortening driven by far-field stresses from the Andes. For those reasons, the basin represents an ideal setting to investigate the multiphase history of rift basins. We thus combine borehole-calibrated 2D and 3D seismic and magnetic data with section restoration and numerical modelling to investigate the architecture and evolution of this basin. We aim to understand: (i) the controls of the basement fabric in 3D fault architecture and kinematics and (ii) how syn-rift faults controlled the geometry and development of fault-related folds. By doing this, we also investigate the timing, kinematics, and magnitude of inversion in the basin to explore its multiphase history. We demonstrate that (i) the basement fabric controlled not only the strike of faults but also their geometry and polarity at depth, (ii) folds in the syn-rift sequence are attributed simply to syn-rift extension along stepped and/or curved faults, and (iii) inverted and/or reverse faults occur within the basin, but these are minor and appear to have formed during rifting. We explain this minor inversion by a change in plate kinematics related to the onset of the nearby transform margin to the north. These results have implications for understanding the 3D evolution of oblique grabens, the role of structural inheritance, and the recognition of inversion- versus extension-related folds in rift basins worldwide.     

Better models are more effectively connected models

Water‐ and sediment‐transfer models are commonly used to explain or predict patterns in the landscape at scales different from those at which observations are available. These patterns are often the result of emergent properties that occur because processes of water and sediment transfer are connected in different ways. Recent advances in geomorphology suggest that it is important to consider, at a specific spatio‐temporal scale, the structural connectivity of system properties that control processes, and the functional connectivity resulting from the way those processes operate and evolve through time. We argue that a more careful consideration of how structural and functional connectivity are represented in models should lead to more robust models that are appropriate for the scale of application and provide results that can be upscaled. This approach is necessary because, notwithstanding the significant advances in computer power in recent years, many geomorphic models are still unable to represent the landscape in sufficient detail to allow all connectivity to emerge. It is important to go beyond the simple representation of structural connectivity elements and allow the dynamics of processes to be represented, for example by using a connectivity function. This commentary aims to show how a better representation of connectivity in models can be achieved, by considering the sorts of landscape features present, and whether these features can be represented explicitly in the model spatial structure, or must be represented implicitly at the subgrid scale. Copyright © 2017 John Wiley & Sons, Ltd.     

Syn-depositional halokinesis in the Zechstein Supergroup (Lopingian) controls Triassic minibasin genesis and location

Salt tectonics is typically caused by the flow of mobile evaporites in response to post-depositional gravity gliding and/or differential loading by overburden sediments. This situation is considerably more complex near the margins of salt basins, where carbonate and clastic rocks may be deposited at the same time as and be interbedded with more mobile, evaporitic strata. In these cases, syn-depositional salt flow may occur due to density differences in the deposited lithologies, although our understanding of this and related processes is relatively poor. We here use 3D seismic reflection and borehole data from the Devil's Hole Horst, West Central Shelf, offshore UK to understand the genesis, geometry, and kinematic evolution of intra-Zechstein Supergroup (Lopingian) minibasins and their effect on post-depositional salt deformation. We show that immobile, pinnacle-to-barrier-like, carbonate build-ups and anhydrite are largely restricted to intra-basin highs, whereas mobile halite, which flowed to form large diapirs, dominates in the deep basin. At the transition between the intra-basin highs and the deep basin, a belt of intra-Zechstein minibasins occurs, forming due to the subsidence of relatively dense anhydrite into underlying halite. Depending on primary halite thickness, these intra-Zechstein minibasins created topographic lows, dictating where Triassic minibasins subsequently nucleated and down-built. Our study refines the original depositional model for the Zechstein Supergroup in the Central North Sea, with the results also helping us better understand the style and distribution of syn-depositional salt flow within other layered evaporitic sequences and the role intra-salt heterogeneity and related deformation may have in the associated petroleum plays.     

Four-dimensional Variability of Composite Halokinetic Sequences

The architecture of salt diapir-flank strata (i.e. halokinetic sequences) is controlled by the interplay between volumetric diapiric flux and sediment accumulation. Halokinetic sequences consist of unconformity-bounded packages of thinned and folded strata formed by drape folding around passive diapirs. They are described by two end-members: (a) hooks, which are characterized by narrow zones of folding (<200 m) and high taper angles (>70°); and (b) wedges, typified by broad zones of folding (300–1000 m) and low taper angles (<30°). Hooks and wedges stack to form tabular and tapered composite halokinetic sequences (CHS) respectively. CHSs were most thoroughly described from outcrop-based studies that, although able to capture their high-resolution facies variations, are limited in describing their 4D variability. This study integrates 3D seismic data from the Precaspian Basin and restorations to examine variations in CHS architecture through time and space along diapirs with variable plan-form and cross-sectional geometries. The diapirs consist of curvilinear walls that vary from upright to inclined and locally display well-developed salt shoulders and/or laterally transition into rollers. CHS are highly variable in both time and space, even along a single diapir or minibasin. A single CHS can transition along a salt wall from tabular to tapered geometries. They can be downturned and exhibit rollover-synclinal geometries with thickening towards the diapir above salt shoulders. Inclined walls present a greater proportion of tapered CHSs implying an overall greater ratio between sediment accumulation and salt-rise relatively to vertical walls. In terms of vertical stacking, CHS can present a typical zonation with lower tapered, intermediate tabular and upper tapered CHSs, but also unique patterns where the lower sequences are tabular and transition upward to tapered CHS. The study demonstrates that CHSs are more variable than previously documented, indicating a complex interplay between volumetric salt rise, diapir-flank geometry, sediment accumulation and roof dimensions.     

SAR observation and model tracking of an oil spill event in coastal waters

Oil spills are a major contributor to marine pollution. The objective of this work is to simulate the oil spill trajectory of oil released from a pipeline leaking in the Gulf of Mexico with the GNOME (General NOAA Operational Modeling Environment) model. The model was developed by NOAA (National Oceanic and Atmospheric Administration) to investigate the effects of different pollutants and environmental conditions on trajectory results. Also, a Texture-Classifying Neural Network Algorithm (TCNNA) was used to delineate ocean oil slicks from synthetic aperture radar (SAR) observations. During the simulation, ocean currents from NCOM (Navy Coastal Ocean Model) outputs and surface wind data measured by an NDBC (National Data Buoy Center) buoy are used to drive the GNOME model. The results show good agreement between the simulated trajectory of the oil spill and synchronous observations from the European ENVISAT ASAR (Advanced Synthetic Aperture Radar) and the Japanese ALOS (Advanced Land Observing Satellite) PALSAR (Phased Array L-band Synthetic Aperture Radar) images. Based on experience with past marine oil spills, about 63.0% of the oil will float and 18.5% of the oil will evaporate and disperse. In addition, the effects from uncertainty of ocean currents and the diffusion coefficient on the trajectory results are also studied.     

Base-salt relief controls salt-tectonic structural style,São Paulo Plateau,Santos Basin,Brazil

Base-salt relief influences salt flow, producing three-dimensionally complex strains and multiphase deformation within the salt and its overburden. Understanding how base-salt relief influences salt-related deformation is important to correctly interpret salt basin kinematics and distribution of structural domains, which have important implications to understand the development of key petroleum system elements. The São Paulo Plateau, Santos Basin, Brazil is characterized by a >2 km thick, mechanically layered Aptian salt layer deposited above prominent base-salt relief. We use 3D seismic reflection data, and physical and conceptual kinematic models to investigate how gravity-driven translation above thick salt, underlain by complex base-salt relief, generated a complex framework of salt structures and minibasins. We show that ramp-syncline basins developed above and downdip of the main pre-salt highs record c. 30 km of Late Cretaceous-Paleocene basinward translation. As salt and overburden translated downdip, salt flux variations caused by the base-salt relief resulted in non-uniform motion of the cover, and the simultaneous development of extensional and contractional structures. Contraction preferentially occurred where salt flow locally decelerated, above landward-dipping base-salt and downdip of basinward-dipping ramps. Extension occurred at the top of basinward-dipping ramps and base-salt plateaus, where salt flow locally accelerated. Where the base of the salt layer was broadly flat, structures evolved primarily by load-driven passive diapirism. At the edge of or around smaller base-salt highs, salt structures were affected by plan-view rotation, shearing and divergent flow. The magnitude of translation (c. 30 km) and the style of salt-related deformation observed on the São Paulo Plateau afford an improved kinematic model for the enigmatic Albian Gap, suggesting this structure formed by a combination of basinward salt expulsion and regional extension. These observations contribute to the long-lived debate regarding the mechanisms of salt tectonics on the São Paulo Plateau, ultimately improving our general understanding of the effects of base-salt relief on salt tectonics in other basins.