A Reconstruction of Observed Profiles in the Sea East of Japan Using Vertical Coupled Temperature-Salinity EOF Modes

It is important to estimate hard-to-observe parameters in the ocean interior from easy-to-observe parameters. This study therefore demostrates a reconstruction of observed temperature and salinity profiles of the sea east of Japan (30°≈40°N, 140°≈150°E). The reconstruction was done by estimating suboptimal state from several values of the observed profiles and/or sea surface dynamic height (SDH) calculated from the profiles. The estimation used a variational method with vertical coupled temperature-salinity empirical orthogonal function (EOF) modes. Profiles of temperature and salinity in the subtropical region are effectively reconstructed from in situ temperature profile data, or sea surface temperature (SST) and SDH. For example, the analyzed temperature field from SST and SDH has an accuracy to within 1°C in the subtropical region. Salinity in the sea north of Kuroshio, however, is difficult to estimate because of its complex variability which is less correlated with temperature than in the subtropical region. Sea surface salinity is useful to estimate the subsurface structure. We also show the possibility that the estimation is improved by considering nonlinearity in the equation calculating SDH from temperature and salinity analysis values in order to examine the misfit between analysis and observation. Analysis using TOPEX/POSEIDON altimetry data instead of SDH was also performed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Distribution of vertical crustal movement rates in the Tohoku district, Japan, predicted by least-squares collocation

Least-squares prediction using an empirically deduced local covariance function was performed to investigate the temporal change in the rates of vertical crustal movements in the Tohoku district, Japan. Levelling data covering an area of approximately 450 × 275 km² observed between 1966 and 1995 were used and the results shown in the form of contour maps. Firstly we derived a covariance function of the rates of vertical crustal movement with a Gaussian form function. We used this function to estimate the spatial distribution of the rates of vertical crustal movements. By the present method, a steady tilt of the Tohoku district to the east, toward the Japan Trench and an areal uplift in the southwestern part were well reproduced. Moreover, a significant temporal change in vertical movement rates is clearly seen. Received: 15 July 1996      

Decadal-scale variation in COD and DIN dynamics during the summer in the inner area of the Ariake Sea,Japan

More than 30 years of chemical oxygen demand (COD) and dissolved inorganic nitrogen (DIN) data for the inner area of the Ariake Sea were analyzed with a box model to show the changes in the average seasonal budget and the decadal-scale variation during the summer. The COD peaked in August and March on average. This summertime peak can be explained by an enhanced riverine load and increased primary production. The peak in March suggested additional organic matter production. There were also two peaks in DIN concentration on average: a summertime peak that could be explained by an enhanced riverine load, and a peak in December that was more complicated to explain. From the 1970s to the early 1990s, the bottom water in this area became increasingly hypoxic due to increased COD during the summer, even though there were minimal increases in terrestrial COD and nutrient loads and there were tidal flats covering a widespread area during this period. The increase in COD was caused by increased net ecosystem production, which was due to enhanced primary production induced by an increased freshwater residence time and decreased bivalve grazing. There was a negative feedback control in which hypoxia progressively increased, leading to declines in bivalve biomass, which in turn decreased the grazing pressure limiting primary production, meaning that primary production increased and the area became even more hypoxic. The net DIN production decreased during the 1980s and the 1990s. This was consistent with the change in net ecosystem production according to the COD.     

Seasonal and interannual variability of oceanic carbon cycling in the western and central tropical-subtropical pacific: A physical-biogeochemical modeling study

The oceanic carbon cycle in the tropical-subtropical Pacific is strongly affected by various physical processes with different temporal and spatial scales, yet the mechanisms that regulate air-sea CO₂ flux are not fully understood due to the paucity of both measurement and modeling. Using a 3-D physical-biogeochemical model, we simulate the partial pressure of CO₂ in surface water (pCO_2sea) and air-sea CO₂ flux in the tropical and subtropical regions from 1990 to 2004. The model reproduces well the observed spatial differences in physical and biogeochemical processes, such as: (1) relatively higher sea surface temperature (SST), and lower dissolved inorganic carbon (DIC) and pCO_2sea in the western than in the central tropical-subtropical Pacific, and (2) predominantly seasonal and interannual variations in the subtropical and tropical Pacific, respectively. Our model results suggest a non-negligible contribution of the wind variability to that of the air-sea CO₂ flux in the central tropical Pacific, but the modeled contribution of 7% is much less than that from a previous modeling study (30%; McKinley et al., 2004). While DIC increases in the entire region SST increases in the subtropical and western tropical Pacific but decreases in the central tropical Pacific from 1990 to 2004. As a result, the interannual pCO_2sea variability is different in different regions. The pCO_2sea temporal variation is found to be primarily controlled by SST and DIC, although the role of salinity and total alkalinity, both of which also control pCO_2sea, need to be elucidated by long-term observations and eddy-permitting models for better estimation of the interannual variability of air-sea CO₂ flux.     

Instabilities in the consumption and production for cobalt

Cobalt is obtained mainly as a byproduct of the mining and metallurgical processing of copper and nickel. The amount of minable cobalt has a characteristic supply limit, which is dependent upon demand for copper and nickel. It is considered that cobalt consumption will be affected by the amount mined in the near future, because world demand has been gradually increasing, while the production from copper sulfide ores in Zaire and Zambia, major producing countries, has decreased for political, economical and technological reasons. The world demand for cobalt has surpassed the world mine production, and cobalt sales from the National Defense Stockpile of the United States and exports from Russia and cobalt recovered from stockpiled intermediates contributed to the supply in 1994. It is concluded, from a statistical point of view, that this trend of shortage and high prices for cobalt will continue in the near future.     

Ab initio calculations of the Fe(II) and Fe(III) isotopic effects in citrates,nicotianamine, and phytosiderophore,and new Fe isotopic measurements in higher plants

Iron is one of the most abundant transition metal in higher plants and variations in its isotopic compositions can be used to trace its utilization. In order to better understand the effect of plant-induced isotopic fractionation on the global Fe cycling, we have estimated by quantum chemical calculations the magnitude of the isotopic fractionation between different Fe species relevant to the transport and storage of Fe in higher plants: Fe(II)-citrate, Fe(III)-citrate, Fe(II)-nicotianamine, and Fe(III)-phytosiderophore. The ab initio calculations show firstly, that Fe(II)-nicotianamine is ～3‰ (⁵⁶Fe/⁵⁴Fe) isotopically lighter than Fe(III)-phytosiderophore; secondly, even in the absence of redox changes of Fe, change in the speciation alone can create up to ～1.5‰ isotopic fractionation. For example, Fe(III)-phytosiderophore is up to 1.5‰ heavier than Fe(III)-citrate₂ and Fe(II)-nicotianamine is up to 1‰ heavier than Fe(II)-citrate. In addition, in order to better understand the Fe isotopic fractionation between different plant components, we have analyzed the iron isotopic composition of different organs (roots, seeds, germinated seeds, leaves and stems) from six species of higher plants: the dicot lentil (Lens culinaris), and the graminaceous monocots Virginia wild rye (Elymus virginicus), Johnsongrass (Sorghum halepense), Kentucky bluegrass (Poa pratensis), river oat (Uniola latifolia), and Indian goosegrass (Eleusine indica). The calculations may explain that the roots of strategy-II plants (Fe(III)-phytosiderophore) are isotopically heavier (by about 1‰ for the δ⁵⁶Fe) than the upper parts of the plants (Fe transported as Fe(III)-citrate in the xylem or Fe(II)-nicotianamine in the phloem). In addition, we suggest that the isotopic variations observed between younger and older leaves could be explained by mixing of Fe received from the xylem and the phloem.     

Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

Design and Long-Term Monitoring of Tokyo International Airport Extension Project Constructed on Super-Soft Ground

To meet the increasing demand for air transportation, Ministry of Land, Infrastructure and Transport had carried out the offshore extension project at Tokyo International Airport (Haneda Airport). The airport should be constructed to be perfectly level, but the ground conditions with very thick layers of super soft dredged soils and need for reclamation made the task very difficult. Because of large amount of consolidation settlement, ground improvement by combined vertical drain method was applied to decrease residual and differential settlement after opening of new airport. This paper is aimed to introduce the design concept and method of ground improvement for this project. In addition the result of ground improvement is keeping satisfactory performance for operating airport confirmed by long-term monitoring for airport facilities.     

Thermal diffusivity of lunar rocks under atmospheric and vacuum conditions

Thermal diffusivity, k, of three lunar rocks (10049 and 10069; Type A, Apollo 11 and 14311; Apollo 14) and a terrestrial basalt (alkaline olivine basalt, Oki-do?go, Japan) was measured under one atmosphere and in vacuum conditions (10^?3 ～ 10^?5 mmHg) in the temperature range from 85 to 850°K. The semi-empirical curve of k =A + B/T +CT³ is fitted to the data in each condition. The porosity of rocks strongly affects the thermal diffusivity at low temperature ( T ? 500°K) in vacuum condition. At 150°K, thermal diffusivity of lunar rocks with porosity of 5.5% (10049) and 11% (10069) at one atmosphere is about 1.7 and 3.2 times of that in vacuum, respectively. The difference between the values at one atmosphere and those in vacuum decreases as the temperature increases. Measurements of k should be made at gas pressures at least lower than 10^?3 mmHg to estimate the value under lunar surface conditions.     

Dike intrusion associated with the 2000 eruption of Miyakejima Volcano, Japan

The model for the 2000 dike intrusion event between Kozushima and Miyakejima volcano, Japan, was reinvestigated. After the sudden earthquake swarm in Miyakejima volcano, a dike intrusion of large volume was detected by the nationwide GPS network (Geonet). The displacements detected with GPS stations over an area with a radius of about 200 km shows a distribution that is consistent with the dike source being located near Miyakejima volcano.The dike was intruded northwestwards between Miyakejima and the neighboring Kozushima volcano. We searched for the parameters in the models that reproduce the regional displacements due to dike intrusion between Miyakejima and Kozushiima islands. We tested three models, (1) the model with a single dike, (2) the model with a dike and a point dislocation source which represents a creep dislocation source and (3) the model with a dike and a deflation source which represents a magma reservoir. Though all three models can match the horizontal displacements near the source area, model 1 fails to reproduce the regional displacements in the central part of Japan. Both models 2 and 3 can reproduce the regional displacement for horizontal components. Model 3 produces slightly better results than model 2 for vertical components. The balance in the volume budget for models 2 and 3 is also consistent with the observations. These results show that we cannot distinguish between the two models using only GPS observation. As there is no direct evidence for such a large creep or ductile source (corresponds to M7 or more) as proposed in model 2 and the active seismic region migrated back and forth within the linear swarm region, the model with a dike and a deep magma source is preferable. For the deflation point source, we obtained a deflation volume of 1.5 km³ at the depth of 20 km below the dike. An additional ~0.95 km³ of volume loss through caldera collapse and edifice deflation took place at Miyakejima. We conclude that the magma that intruded the dike came in part from below Miyakejima and in part from below the sea floor between Miyakejima and Kozushima, perhaps from reservoirs at the Moho.Editorial responsibility: S Nakada, T Druitt