Microearthquakes along the back-arc spreading system in the eastern Bismarck Sea

OBS’s were deployed for 26 to 29 days in the eastern Bismarck Sea to investigate the back-arc spreading. Hypocenters of 186 shallow earthquakes were determined using P- and S-waves from at least five stations. In the western survey area, a transform fault zone is marked by a linear micro-earthquake activity striking N65°W and less than 5 km wide. The predominant type of their focal mechanisms is strike-slip. In the eastern area, several intermittent zones of micro-earthquakes and their strike-slip type focal mechanisms suggest the location of short-length transform faults separating en-echelon spreading ridges.     

Formation and shortening deformation of a back-arc rift basin revealed by deep seismic profiling, central Japan

The northern Fossa Magna (NFM) basin is a Miocene rift system produced in the final stages of the opening of the Sea of Japan. It divides the major structure of Japan into two regions, with north-trending geological structures to the NE of the basin and EW trending structures to the west of the basin. The Itoigawa-Shizuoka Tectonic Line (ISTL) bounds the western part of the northern Fossa Magna and forms an active fault system that displays one of the largest slip rates (4–9 mm/year) in the Japanese islands. Deep seismic reflection and refraction/wide-angle reflection profiling were undertaken in 2002 across the northern part of ISTL in order to delineate structures in the crust, and the deep geometry of the active fault systems. The seismic images are interpreted based on the pattern of reflectors, the surface geology and velocities derived from refraction analysis. The 68-km-long seismic section suggests that the Miocene NFM basin was formed by an east dipping normal fault with a shallow flat segment to 6 km depth and a deeper ramp penetrating to 15 km depth. This low-angle normal fault originated as a comparatively shallow brittle/ductile detachment in a high thermal regime present in the Miocene. The NFM basin was filled by a thick (>6 km) accumulation of sediments. Shortening since the late Neogene is accommodated along NS to NE–SE trending thrust faults that previously accommodated extension and produce fault-related folds on their hanging wall. Based on our balanced geologic cross-section, the total amount of Miocene extension is ca. 42 km and the total amount of late Neogene to Quaternary shortening is ca. 23 km.     

Characteristics of the Lyman-alpha humidiometer and measurements of turbulent humidity fluctuations over the ocean

The characteristics of a Lyman-alpha humidiometer have been carefully examined in an air-conditioned test chamber. The results confirm that when carefully used, this humidiometer is suitable for measurements of turbulent humidity fluctuations. Measurements with a Lyman-alpha humidiometer were carried out in the surface boundary layer over the ocean. The relation between turbulent intensity ( _a = a ^ov2) and the friction humidity (a _*) can be expressed as _a = l.6a _*. The spectrum of turbulent humidity for wind speeds larger than 3 m s ^–1 conforms to the similarity law in the surface boundary layer. The spectrum has two characteristic normalized frequencies, namely, a higher peak and a secondary peak (or a shoulder).     

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks,Japan, a possible high-pressure dehydration product of antigorite serpentinite

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks (HMR), west-central Kyushu, Japan, may be formed by high-pressure dehydration of antigorite, and may indicate deep subduction of serpentinite reaching a pressure–temperature condition of 1.6 GPa and 740–750 °C. Three rock types have been identified based on mineral assemblage and rock texture: Type I (L) consisting of medium-grained (1–5 cm long) olivine + enstatite + chromite ±tremolite with secondary talc and anthophyllite that occurs in low-grade metamorphic rocks of the biotite zone, Type I (H) of coarse-grained (up to 10 cm long) olivine + enstatite (with clinoenstatite lamella) + chromite ±tremolite with secondary talc that occurs in high-grade metamorphic rocks of the garnet-cordierite zone, and Type II composed of Al-spinel + chlorite + olivine + apatite + ilmenite with minor sodic gedrite in the garnet-cordierite zone together with Type I (H). Olivines in all rock types are mostly serpentinized during exhumation. The chromite-olivine thermometer gives 560–690 °C for Type I (L) rocks, and the spinel-olivine thermometer gives 610–740 °C for Type II rocks. The peak metamorphic pressure will be higher than 1.6 GPa based on the location of the experimentally determined invariant point (P = 1.6 GPa and T = 670 °C) of antigorite + forsterite + enstatite + talc + H₂O. This estimate is consistent with the occurrence of chlorite in Type II rocks, which is stable up to 890 °C at 2.0 GPa. The spinifex-like textured metaperidotites occur as small bodies in the low P/T type gneisses, implying tectonic juxtaposition of them probably during exhumation of the HMR. Recent findings of medium pressure (0.9–1.2 GPa) granulites and gneisses from the HMR may indicate that the HMR has a deep root into the wedge mantle from which the spinifex-like textured metaperidotites have derived.     

Touhuanping Fault, an active wrench fault within fold-and-thrust belt in northwestern Taiwan, documented by spatial analysis of fluvial terraces

This study aims at the recent activity and development of an active wrench fault, the Touhuanping Fault in northwestern Taiwan. Northwestern Taiwan has been proposed in a current situation between the mature to waning collision in terms of tectonic evolution. The main drainage in this area, the Chungkang River, flows close to the trace of the fault mentioned above. We examined various types of deformation of fluvial terraces along the Chungkang River as a key to understanding the nature and rate of the late Quaternary tectonics. The E–W trending Touhuanping Fault has long been mapped as a geological boundary fault, but its recent activity was suspected. Field survey revealed that its late Quaternary activity is recorded in the offset fluvial terraces. Our result shows dextral slip and vertical offset with upthrown side on the south, and activated at least twice since the emergence of terrace 4 (older terrace 3 with OSL date of ca. 80 ka). Total amount of offset recorded in the Touhuanping terrace sequence is 15 m for dextral and 10 m for vertical offset. Estimated recurrence time of earthquake rupture may be a few tens of thousand years. Uplift on the upthrown side of the Touhuanping Fault also resulted in the formation of drowned valleys which were graded to terrace 4. Other deformation features, such as back-tilting, westward warping, and a range-facing straight scarp, were also identified. A second-order anticline roughly parallel to the Touhuanping Fault is suggested to be the origin of the northward tilting on terrace 3; it could have resulted from a flower structure on the Touhuanping Fault at shallow depth. This may demonstrate that the buried segment of the Touhuanping Fault has also been active since 80 ka. In the northern study area, the westward warping at terrace 2 probably represents late Quaternary activity of another NE–SW trending Hsincheng Fault.     

New pop-up type Ocean Bottom Seismometer

We designed a new pop-up type Ocean Bottom Seismometer (OBS) in order to study micro-earthquakes in off-shore areas. With a 57 cm O.D. sphere of high tension aluminium alloy, the OBS system, including one vertical and one horizontal geophone, can safely operate on ocean floors of up to 6000 m depth for seismic observations. The amplified seismic data and the time code are directly recorded on the four-channel cassette deck for periods of up to one month. The frequency response curve throughout the recording and play-back system is flat for the range, 1–15 Hz (–3 dB). The anchor release and the geophone clamp are operated by an acoustic command signal.So far, we have deployed our OBS's 42 times in the ocean. All of the OBS's deployed have been recovered safely. Seismic data has provided seismological evidence for a number of processes associated with tectonism along subduction zones and spreading ridges (e.g., Eguchi et al., 1986).     

Rupture process of the Miyagi-Oki,Japan, earthquake of June 12, 1978

The faulting mechanism and multiple rupture process of the M = 7.4 Miyagi-Oki earthquake are studied using surface and body wave data from local and worldwide stations. The main results are as follows. (1) P-wave first motion data and radiation patterns of long-period surface waves indicate a predominantly thrust mechanism with strike N10° E, dip 20°W, and slip angle 76°. The seismic moment is 3.1 × 10²⁷ dyne-cm. (2) Farfield SH waveforms and local seismograms suggest that the rupture occurred in two stages, being concordant with the two zones of aftershock activity revealed by the microearthquake network of Tohoku University. The upper and lower zones, located along the westward-dipping plate interface, are separated by a gap at a depth of 35 km and have dimensions of 37 × 34 and 24 × 34 km², respectively. Rupture initiated at the southern end of the upper aftershock zone and propagated at N20°W subparallel to the trench axis. About 11 s later, the second shock, which was located 30 km landward (westward) of the first, initiated at the upper corner of the lower aftershock zone and propagated down-dip N80°W. Using Haskell modelling for this rupture process, synthetic seismograms were computed for teleseismic SH waves and nearfield body waves. Other parameters determined are: seismic moment $\text{M}{}_0\text{= 1.7 × 10}{}^{27}\text{dyne-cm, slip dislocation}\text{u}\text{= 1.9}\text{m}\text{, Δσ = 95}\text{bar, rupture velocity}\text{ν = 3.2}\text{km s}{}^{\mathrm{?1}}\text{,}\text{rise time}\text{τ = 2}\text{s}$, for the first event; $\text{M}{}_0\text{= 1.4 × 10}{}^{27}\text{dyne-cm}\text{,}\text{u}\text{= 2.4}\text{m}\text{, Δσ = 145}\text{bar}$, for the second event; and time separation between the two shocks ΔT = 11 s. The above two-segment model does not explain well the sharp onsets of the body waves at near-source stations. An initial break of a small subsegment on the upper zone, which propagated down-dip, was hypothesized to explain the observed near-source seismograms. (3) The multiple rupture of the event and the absence of aftershocks between the two fault zones suggests that the frictional and/or sliding characteristics along the plate interface are not uniform. The rupture of the first event was arrested, presumably by a region of high fracture strength between the two zones. The fracture energy of the barrier was estimated to be 10¹⁰ erg cm^?2. (4) The possible occurrence of a large earthquake has been noted for the region adjacent to and seaward of the area that ruptured during the 1978 event. The 1978 event does not appear to reduce the likelihood of occurrence of this expected earthquake.     

Wellbore‐Wall Compression Effects on Monitored Groundwater Levels and Qualities

The effects of wellbore‐wall compression from rough excavation on monitored groundwater levels and qualities under natural hydraulic gradient conditions were investigated in a shallow clayey Andisol aquifer. Nine wellbores reaching the underlying aquitard at about 2.6‐m depth were constructed by dynamic cone penetrometry to mimic rough wellbore construction. Five of these were constructed under wet aquifer soil conditions and the remaining four under dry conditions. A 15‐month period monitoring showed that the groundwater levels in the wellbores constructed under wet conditions responded significantly in retard of, and in narrower ranges than, those constructed under dry conditions. The wellbore‐wall hydraulic conductivities at the former wellbores were calculated to be more than one to two orders of magnitude lower than those at the latter ones. Furthermore, remarkable nitrate removal attributable to the occurrence of a heterotrophic denitrification was observed in one of the former wellbores. In contrast, the groundwater levels and qualities in the latter wellbores appeared to be generally similar to those monitored in the conventional soil coring and augering‐derived wellbores. Our results suggest that the wellbore‐wall compression induced by rough excavation under wet and soft aquifer soil conditions leads to a substantial decrease in the wellbore‐wall hydraulic conductivity, which in turn can lead to unreliable groundwater levels and qualities. This problem can occur in clayey Andisols whenever the aquifer soil is wet; however, the problem can be largely avoided by constructing the wellbore under dry and hard aquifer soil conditions.     

We have come a long way, yet we still have far to go

Disaster experts around the world have continually warned governments and the public about the possibility of “worst-case” natural hazard scenarios and their overwhelming impacts. Yet, planning for the occurrence of these events has fallen far short of need. The large earthquake that occurred off the coast of Sumatra in 2004, which resulted in one of the deadliest tsunamis ever recorded, was a painful reminder that living in some of the most desirable areas of the world does have its risks. We all have enjoyed the fun of restful visits to coastal resort communities all around the world, and we rarely think about earthquakes or tsunamis interfering with this enjoyment. Yet, they take us by surprise. Before these events do occur, there should be adequate education for everyone on what actions are appropriate as well as an effective warning system to trigger the right actions.     

Seismotectonics and tectonic history of the andaman sea

The Andaman Sea is considered as an actively spreading back-arc basin. Seismicity and newly determined focal-mechanism solutions in the Andaman Sea area support this view. The tectonic history of the region is inferred from magnetic lineations in the northeastern Indian Ocean and the northward motion of Greater India. The mid-oceanic ridge which migrated northward along the east side of the Ninetyeast Ridge collided with the western end of the “old Sunda Trench” in the Middle or Late Miocene (10–20 m.y. B.P.). This ridge—trench collision released much of the compressional stress in the back-arc area and the continued northward movement of India that collided with Eurasia exerted a drag on the back-arc region, causing the opening of the Andaman Sea. In appearance, the subducted ridge jumped to the back-arc area. Thus, the Andaman Sea is not an ordinary subduction-related back-arc basin, but probably a basin formed by oblique extensional rifting associated with both ridge subduction and deformation of the back-arc area caused by a nearby continental collision.