OSIRIS: AO-assisted integral-field spectroscopy at the Keck Observatory

OSIRIS (OH-Suppressing Infra-Red Integral-field Spectrograph) is a new facility instrument for the Keck Observatory. After seeing first light in February 2005, OSIRIS is currently undergoing commissioning. OSIRIS provides the capability of performing three-dimensional spectroscopy in the near-infrared z, J, H, and K bands at the resolution limit of the Keck II telescope, which is equipped with adaptive optics and a laser guide star. The science case for OSIRIS is summarized, and the instrument and associated data reduction software are described.     

Optical properties of solid and liquid sulfur at visible and infrared wavelengths

Knowledge of the optical constants of elemental sulfur has potential applications to Venus, Jupiter, Io, Amalthea, and the Earth. The real part, n, of the index of refraction of liquid sulfur (at 133°C) and of solid orthorhombic sulfur (at 25°C) for the wavelength range 0.4–2.0 μm were measured ellipsometrically. The imaginary part, k, of the refractive index of liquid sulfur was obtained by transmittance measurements at the same temperature and wavelength range. The reflectance of semi-infinite slabs of solid and liquid sulfur is calculated using the measured n and k values. We confirm that sulfur melts on Io would be classified as “black” by the Voyager imaging system.     

A high resolution,multiproxy Late‐glacial record of climate change and intrasystem responses in northwest England

A lacustrine carbonate sequence from Hawes Water, Lancashire, UK, has been studied using stable isotopic, lithological, pollen and mineral magnetic analysis. The data reveal four abrupt climatic oscillations in the Late‐glacial Interstadial leading up to the onset of the Loch Lomond Stadial. The data also point to climatic warming relatively early within the stadial, ca. 12 500 GRIP yr, prior to the onset of the Holocene. The oxygen isotope record is taken as a signature of climate forcing against which the response of the lake‐system can be monitored. By adopting this approach it is revealed that the response of the biological system to the rapid climatic oscillations is non‐linear and primarily a function of the antecedent conditions. A significant end‐Devensian isotopic excursion (A) is matched by only minor changes in the cold‐adapted floras and faunas. During the warmer interstadial, the response of the biological ecosystem (events B–D) is clearly influenced by thresholds: major changes in the catchment vegetation associated with relatively minor oscillations in the isotopic signature. The stratigraphical patterns reveal significant lag effects between the onset of climate deterioration and resulting changes in vegetation. Copyright © 2002 John Wiley & Sons, Ltd.     

Confirmation of a meteoritic component in impact‐melt rocks of the Chesapeake Bay impact structure,Virginia, USA—Evidence from osmium isotopic and PGE systematics

Abstract— The osmium isotope ratios and platinum‐group element (PGE) concentrations of impact‐melt rocks in the Chesapeake Bay impact structure were determined. The impact‐melt rocks come from the cored part of a lower‐crater section of suevitic crystalline‐clast breccia in an 823 m scientific test hole over the central uplift at Cape Charles, Virginia. The ¹⁸⁷Os/¹⁸⁸Os ratios of impact‐melt rocks range from 0.151 to 0.518. The rhenium and platinum‐group element (PGE) concentrations of these rocks are 30–270x higher than concentrations in basement gneiss, and together with the osmium isotopes indicate a substantial meteoritic component in some impact‐melt rocks. Because the PGE abundances in the impact‐melt rocks are dominated by the target materials, interelemental ratios of the impact‐melt rocks are highly variable and nonchondritic. The chemical nature of the projectile for the Chesapeake Bay impact structure cannot be constrained at this time. Model mixing calculations between chondritic and crustal components suggest that most impact‐melt rocks include a bulk meteoritic component of 0.01–0.1% by mass. Several impact‐melt rocks with lowest initial ¹⁸⁷Os/¹⁸⁸Os ratios and the highest osmium concentrations could have been produced by additions of 0.1%–0.2% of a meteoritic component. In these samples, as much as 70% of the total Os may be of meteoritic origin. At the calculated proportions of a meteoritic component (0.01–0.1% by mass), no mixtures of the investigated target rocks and sediments can reproduce the observed PGE abundances of the impact‐melt rocks, suggesting that other PGE enrichment processes operated along with the meteoritic contamination. Possible explanations are 1) participation of unsampled target materials with high PGE abundances in the impact‐melt rocks, and 2) variable fractionations of PGE during syn‐ to post‐impact events.     

Stationary distribution function for non-adiabatic particle motion in a one dimensional current sheet

The problem of pitch angle scattering in field configurations similar to those found in the geomagnetic tail has been studied previously by Tsyganenko (1982). Tsyganenko used a scattering matrix to map pitch angle distributions through the current sheet. By using numerical solutions of the resulting integral equations he showed for weakly non-adiabatic particles the Stationary Distribution Function (SDF) was isotropic. Using his procedure the SDF was found to develop anisotropies with increasing non-adiabaticity. The work presented here shows analytically that for any degree of scattering the SDF must be isotropic for a general planar field reversal. Computations of particle trajectories have been used to verify some aspects of the analytic work.     

Subaqueous pyroclastic flows and ignimbrites: an assessment

An assessment of the literature on subaqueous pyroclastic flows and their deposits shows that the term pyroclastic flow is frequently used loosely to describe primary, hot gas-rich pyroclastic flows, mass-flows which resulted from the transformation of gassupported flows into water-supported ones, and secondary mass-flows carrying redeposited pyroclastic debris. Based on subaerial pyroclastic flows, the term pyroclastic flow should be restricted to demonstrably hot, gas-rich mass-flows of pyroclastic debris. Using this definition, very few examples of subaqueous pyroclastic deposits with evidence for hot emplacement and of having been wholly submerged have been described. In the majority of these cases, the evidence for a hot state of emplacement and for the subaqueous nature of the host depositional environment is inadequate. The only unequivocal cases of hot pyroclastic flow deposits with adequate supporting evidence are the Ordovician nearshore, shallow marine ignimbrites of Ireland and Wales, and Miocene ignimbrites of southwest Japan, resulting from the passage of subaerially erupted pyroclastic flows into shallow water. Other possible examples are near-vent dense clast deposits in the Donzurobo Formation of Japan, possible submarine intra-caldera ponded ignimbrite successions in California and Wales, and near-vent pumiceous deposits of Ramsay Island, Wales. All other purported cases are either clearly the result of water-supported mass-flow transportation and deposition (debris avalanches, debris flows, turbidity currents), or lack adequate supporting evidence regarding the heat state or the palaeoenvironment. Only the shallow marine ignimbrites of Ireland and Wales show adequate evidence of welding, but even these could have been nearly wholly exposed above sea-level when welding occurred. We conclude that when pyroclastic flows enter water they are generally disrupted explosively and/or ingest water and transform into water-supported mass-flows, and we suggest the various scenarios in which this occurs. There is no evidence to suggest that welding in wholly subaqueous environments is common.     

Inhomogeneous substrate analysis using EM300 backscatter imagery

Backscatter reflectivity from multibeam echo-sounders provides a powerful tool to efficiently characterize seafloor substrates. A comprehensive EM300 bathymetric and backscatter survey has been completed of Cook Strait, in central New Zealand. This paper presents a detailed analysis of the realtime corrections applied to the raw EM300 multibeam data and additional corrections required to compute angular variations of the backscatter strength. The corrections, including the local absorption coefficient, the influence of seafloor topography and sound refraction in the water column, are determined for different Cook Strait seafloor substrates. Modifying MB-System software code, we extracted the backscatter signal parameters in order to quantify the raw backscatter strength and apply additional processing. Profiles of backscatter strength versus incidence angle were computed for a variety of sites characterized by flat seafloor and homogeneous substrates, and for which ground-truth data were available. For each homogeneous site, different but characteristic backscatter profiles are observed that can be interpreted in terms of sediment facies. To analyze heterogeneous substrates, we present a statistical technique, based on a 3-dimensional distribution of (incidence angle, backscatter strength) couples that preserves geological information of the substrate components. This analysis, using backscatter data acquired on a submarine volcano, north of New Zealand, clearly differentiates soft sediments and lava flows within a heterogeneous substrate.     

Morphodynamics of a bar-trough surf zone

A field study was made of the distinguishing morphodynamic processes operating in a surf zone which perennially exhibits accentuated bar-trough topography (the “longshore-bar-trough” and “rhytmic-bar-and-beach” states as described by Wright and Short, 1984). Characteristic features of the morphology include a shallow bar with a steep shoreward face, a deep trough, and a steep beach face. This morphology, which is favored by moderate breaker heights and small tidal ranges, strongly controls the coupled suite of hydrodynamic processes. In contrast to fully dissipative surf zones, the bar-trough surf zone is not at all saturated and oscillations at incident wave frequency remain dominant from the break point to the subaerial beach. The degree of incident wave groupiness does not change appreciably across the surf zone. Infragravity standing waves which, in dissipative surf zones, dominate the inshore energy, remain energetically secondary and occur at higher frequencies in the bar trough surf zone. Analyses of the field data combined with numerical simulations of leaky mode and edge wave nodal—antinodal positions over observed surf-zone profiles, indicate that the frequencies which prevail are favored by the resonant condition of antinodes over the bar and nodes in the trough. Standing waves which would have nodes over the bar are suppressed. Sediment resuspension in the surf zone appears to be largely attributable to the incident waves which are the main source of bed shear stress. In addition, the extra near-bottom eddy viscosity provided by the reformed, non-breaking waves traversing the trough significantly affects the vertical velocity profile of the longshore current. Whereas the bar is highly mobile in terms of onshore—offshore migration rates, the beach face and inner regions of the trough are remarkably stable over time.     

Wave enhancement due to blockage in semi-submersible and TLP structures

An exact analytical method is described to solve the diffraction problem of a group of truncated vertical cylinders. In order to account for the interaction between the cylinders, Kagemoto and Yue's exact algebraic method is utilised (Kagemoto, H., Yue, D.K.P., 1986. Interactions among multiple three-dimensional bodies in water waves: an exact algebraic method. J Fluid Mech, 46, 129–139). The isolated cylinder diffraction potential is obtained using Garret's solution and evanescent mode solutions are derived in a similar manner (Garret, C.J.R., 1971. Wave forces on a circular dock. J Fluid Mech, 46, 129–139).Free surface elevations are calculated for an array of four cylinders and compared with experiments. Comparisons show good agreement.