Porphyroblast inclusion-trail orientation data: eppure non son girate*!

Extensive examination of large numbers of spatially orientated thin sections of orientated samples from orogens of all ages around the world has demonstrated that porphyroblasts do not rotate relative to geographical coordinates during highly non-coaxial ductile deformation of the matrix subsequent to their growth. This has been demonstrated for all tectonic environments so far investigated. The work also has provided new insights and data on metamorphic, structural and tectonic processes including: (1) the intimate control of deformation partitioning on metamorphic reactions; (2) solutions to the lack of correlation between lineations that indicate the direction of movement within thrusts and shear zones, and relative plate motion; and (3) a possible technique for determining the direction of relative plate motion that caused orogenesis in ancient orogens.     

Chronology and evolution of the northern Iceland Plateau

New aeromagnetic data, K-Ar age determinations of dredged marine igneous rocks, as well as other geophysical evidence have shed light on the chronology, nature and evolution of the northern Iceland Plateau. Correspondence between seismic refraction profiles taken on the Jan Mayen Ridge and westward through Jan Mayen Island, suppressed aeromagnetic anomalies, earthquake surface wave studies, and ages of dredged igneous rocks suggest these strata may form an extended region of thickened crust, possibly of Caledonian age, extending westward toward the Kolbeinsey Ridge and northwest to the south wall of the Jan Mayen Fracture Zone.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Controls on low-pressure anatexis

Low-pressure anatexis, whereby rocks melt in place after passing through the andalusite stability field, develops under more restricted conditions than does low-pressure metamorphism. Our thermal modelling and review of published work indicate that the following mechanisms, operating alone, may induce anatexis in typical pelitic rocks without inducing wholesale melting in the lower crust: (i) magmatic advection by pervasive flow; (ii) crustal-scale detachment faulting; and (iii) the presence of a high heat-producing layer. Of these, only magmatic advection by pervasive flow and crustal-scale detachment faulting have been shown quantitatively to provide sufficient heat to cause widespread melting. Combinations of the above mechanisms with pluton-scale magmatic advection, shear heating, removal of the lithospheric mantle, or with each other provide additional means of developing suitable high temperatures at shallow crustal levels to generate low-pressure anatexis.     

Quantitative Constraints on Metamorphism in the Variscides of Southern Brittany--a Complementary Pseudosection Approach

Previous studies of metapelitic rocks from the core of the southernBrittany metamorphic belt suggest a complex clockwise P–Tevolution. We use pseudosections calculated for an average subaluminousmetapelite composition in the MnNCKFMASH system and averageP–T calculations to investigate in more detail the metamorphicevolution of these rocks. For migmatites, sequential occurrenceof kyanite, kyanite + staurolite and sillimanite suggests thata prograde evolution to P > 8 kbar at T     

Petrogenetic modelling of strongly residual metapelitic xenoliths within the southern Platreef,Bushveld Complex,South Africa

Xenoliths of quartz‐absent Fe‐rich aluminous metapelite are common within the platinum group element‐rich mafic/ultramafic magmatic rocks of the Platreef. Relative to well‐characterized protoliths, the xenoliths are strongly depleted in K₂O and H₂O, and have lost a substantial amount of melt (>50 vol.%). Mineral equilibria calculations in the NCKFMASHTO system yield results that are consistent with observations in natural samples. Lower‐grade rocks that lack staurolite constrain peak pressures to ～2.5 kbar in the southern Platreef. Smaller xenoliths and the margins of larger xenoliths comprise micro‐diatexite rich in coarse acicular corundum and spinel, which record evidence for the metastable persistence of lower‐grade hydrous phases and rapid melting consequent on a temperature overstep of several hundred degrees following their incorporation in the mafic/ultramafic magmas. In the cores of larger xenoliths, temperatures increased more slowly enabling progressive metamorphism by continuous prograde equilibration and the loss of H₂O by subsolidus dehydration; the H₂O migrated to xenolith margins where it may have promoted increased melting. According to variations in the original compositional layering, layers became aluminosilicate‐ and/or cordierite‐rich, commonly with spinel but only rarely with corundum. The differing mineralogical and microstructural evolution of the xenoliths depends on heating rates (governed by their size and, therefore, proximity to the Platreef magmas) and the pre‐intrusive metamorphic grade of the protoliths. The presence or absence of certain phases, particularly corundum, is strongly influenced by the degree of metastable retention of lower‐grade hydrates in otherwise identical protolith bulk compositions. The preservation of fine‐scale compositional layering that is inferred to be relict bedding in xenolith cores implies that melt loss by compaction was extremely efficient.     

Sea level control of stacked late Quaternary coastal sequences, central Great Barrier Reef

Lithofacies analysis, pollen assemblages and radiocarbon age dates of 20 stratigraphic drill holes are used to develop an evolutionary history for late Quaternary sedimentation in two coastal embayments landward of the central Great Barrier Reef. Different physiographic settings of the embayments result in two contrasting styles of sedimentary sequence: (a) an exposed, moderate energy, beach barrier-lagoon system (Wyvuri Embayment) and (b) a protected, low energy, muddy inlet fill sequence (Mutchero Inlet). Despite sharp contrast in sequence style, similar depositional cycles occur in both embayments in response to late Quaternary sea level fluctuations including: (1) a last interglacial highstand (+2 m; c. 125 000 yr bp ) beach barrier (Wyvuri); (2) an early to mid-Holocene (8000–6100 yr bp ) transgressive beach barrier-lagoon (Wyvuri) and estuarine infill (Mutchero); and (3) mid-Holocene to present highstand beach barrier (Wyvuri) and estuarine (Mutchero) progradation. Preservation of such cycles in the stratigraphic record would produce a series of vertically stacked and offset linear barrier sands surrounded by lagoonal mud and fine grained shoreface sediment juxtaposed to muddy, estuarine infills. Sea level elevations are well recorded by the upward transition from Rhizophora-dominated intertidal mangrove mud to freshwater swamp (clearly identified by pollen analysis) and by the basal contacts of beach barrier sediments which sharply overlie the upper shoreface. Transgressive sedimentation is interrupted in both embayments by a constructional beach barrier (Wyvuri) and abbreviated progradation (Mutchero) corresponding to a — 5 m pause in relative sea level rise at c. 6800 yr bp . Sea level control of fine scale coastal sedimentation patterns is beginning to be widely recognized and provides an accurate analogue for stacked ancient sequences.     

Coarse-grained sediment gravity flow facies in a large supraglacial lake

Near Williams Lake, in the central interior of British Columbia, the Fraser River exposes long sections of late Pleistocene glaciolacustrine sediments selectively preserved within a bedrock trough. The dominant facies types are thick, normally graded gravels and sands that occupy steeply dipping multistorey channels up to 300 m wide and several tens of metres deep. Channels appear to have been simultaneously cut and filled by high density turbidity currents in a glacial lake floored by stagnant ice. Fining upward sediment gravity flow sequences up to 50 m thick may be the product of quasi-continuous ‘surging’ turbidity flows triggered by catastrophic meltwater discharges into the trough or retrogressive failure of ice-cored sediments. Large-scale post-depositional deformation structures, such as synclinal folds, normal faults, sedimentary dyke swarms and dewatering structures, record gravitational foundering of sediment and pore-water expulsion caused by the melt of underlying glacier ice. Melting of buried ice masses along the floor of the trough appears to have controlled the flow paths of turbidity currents by producing sub-basins within the overlying sediment pile. An idealized model of ‘supraglacial’ lacustrine sedimentation is developed that may be applicable to other glaciated areas with similar bedrock topography.