Geochemistry, petrology and ages of the lunar meteorites Kalahari 008 and 009: New constraints on early lunar evolution

Kalahari 008 and 009 are two lunar meteorites that were found close to each other in Botswana. Kalahari 008 is a typical lunar anorthositic breccia; Kalahari 009 a monomict breccia with basaltic composition and mineralogy. Based on minor and trace elements Kalahari 009 is classified as VLT (very-low-Ti) mare basalt with extremely low contents of incompatible elements, including the REE. The Lu-Hf data define an age of 4286 ± 95 Ma indicating that Kalahari 009 is one of the oldest known basalt samples from the Moon. It provides evidence for lunar basalt volcanism prior to 4.1 Ga (pre-Nectarian) and may represent the first sample from a cryptomare. The very radiogenic initial ¹⁷⁶Hf/¹⁷⁷Hf (εHf = +12.9 ± 4.6), the low REE, Th and Ti concentrations indicate that Kalahari 009 formed from re-melting of mantle material that had undergone strong incompatible trace element depletion early in lunar history. This unusually depleted composition points toward a hitherto unsampled basalt source region for the lunar interior that may represent a new depleted endmember source for low-Ti mare basalt volcanism. Apparently, the Moon became chemically very heterogeneous at an early stage in its history and different cumulate sources are responsible for the diverse mare basalt types.Evidence that Kalahari 008 and 009 may be paired includes the similar fayalite content of their olivine, the identical initial Hf isotope composition, the exceptionally low exposure ages of both rocks and the fact that they were found close to each other. Since cryptomaria are covered by highland ejecta, it is possible that these rocks are from the boundary area, where basalt deposits are covered by highland ejecta. The concentrations of cosmogenic radionuclides and trapped noble gases are unusually low in both rocks, although Kalahari 008 contains slightly higher concentrations. A likely reason for this difference is that Kalahari 008 is a polymict breccia containing a briefly exposed regolith, while Kalahari 009 is a monomict brecciated rock that may never have been at the surface of the Moon.Altogether, the compositions of Kalahari 008 and 009 permit new insight into early lunar evolution, as both meteorites sample lunar reservoirs hitherto unsampled by spacecraft missions. The very low Th and REE content of Kalahari 009 as well as the depletion in Sm and the lack of a KREEP-like signature in Kalahari 008 point to a possible source far from the influence of the Procellarum-KREEP Terrane, possibly the lunar farside.     

Book Reviews

Book reviewed in this article:
Westheide, W. & C. O. Hermans (Eds.): The Ultrastructure of Polychaeta. Microfauna Marina, Vol. 4. Ed.: P. Ax, Veröffentl. der Akademie der Wissenschaften u. der Literatur, Mainz. Gustav Fischer Verlag, Stuttgart, New York, 1988. 494 pp., numerous figs. Hard cover; DM 118,—.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Spatial heterogeneity of epibenthos on artificial reefs: fouling communities in the early stages of colonization on an East Australian shipwreck

Artificial reefs are spatially complex habitats and serve as good model systems to study patterns of community succession and the response of epibiota to environmental clines over small spatial scales. Here, we quantified spatial heterogeneity in community composition and diversity of fouling communities across a number of environmental gradients that included water depth, surface orientation of habitats, exposure to currents, and shelter. Assemblage structure was quantified by spatially replicated photo transects on a recently scuttled large navy ship off the East Australian coast, lying in 27 m of water. A rich assemblage of epifauna had colonized the wreck within a year, dominated by barnacles, sponges and bryozoans. Community structure varied significantly over small spatial scales of meters to tens of meters. Depth, surface orientation and exposure were the major environmental drivers. Assemblages were substantially less diverse and abundant on the deepest (23 m near the seafloor) part of the hull with residual antifouling paint, on sheltered surfaces inside the wreck, and on the sediment‐laden horizontal surfaces. Overall, the wrecks’ habitat complexity corresponds with small‐scale heterogeneity in the fouling communities. This study supports the notion that wrecks enhance local diversity and biomass within the habitat mosaic of their location, and habitat complexity may be an important mechanism for this, as demonstrated by the large spatial variability in the assemblages documented here.     

Revising macroseismic data in Switzerland: The December 20, 1720 earthquake in the region of Lake Constance

Upgrading the Earthquake Catalog of Switzerland (ECOS) included revising the earthquake of 1720. This change has major importance for history and seismology.Although that quake has been the subject of several publications, none was based on critical methods. This re-evaluation of the event is built upon a new and more reliable database established after investigating archives and libraries. Using data from such historical sources, we assigned new site intensities, adopting the criteria established by the European macroseismic scale EMS 98 (Grünthal, 1998).We discovered that the event had been assigned an overestimated intensity, due to interpretation errors in former earthquake catalogs and compilations. We recommend reducing the intensity from I₀= VIII to I₀= VI (EMS 98). The moment magnitude is given as M_W= 4.6. Since the event had been considered the largest for its respective area, downgrading it now will influence the seismic hazard assessment for this region.     

Recent insights into the dissolved and particulate fluxes from the Himalayan tributaries to the Ganga River

The Ganga River plays a major role in the transfer of materials from the Indian sub-continent to the Bay of Bengal, both in dissolved and particulate forms. To understand the present elemental dynamics of the Ganga River system, it is important to assess the hydrogeochemical contribution of its tributaries. In this paper, we present an updated database on dissolved and particulate fluxes and denudation rates of the Himalayan tributaries of the Ganga River (Ramganga, Ghaghara, Gandak and Kosi). Dissolved trace element concentrations, their fluxes and suspended sediment-associated elemental fluxes of the Himalayan tributaries have been reported for the first time. Total dissolved flux of the Ramganga, Ghaghara, Gandak and Kosi was estimated as 4, 19.1, 10.3 and 8.8 million tons year^?1 accounting for ~?5.7, ~?27.3, ~?14.7 and ~?12.6%, respectively, of the total annual dissolved load carried by the Ganga River. The total particulate flux of the Ramganga, Ghaghara, Gandak and Kosi was computed as 8.2, 81.6, 30.9 and 19.5 million tons year^?1, respectively. Compared to earlier studies, we have found a significant increase in the total dissolved flux and chemical denudation rate of the studied tributaries. The estimated particulate fluxes were found to be low in comparison to the previous studies. We suggest that a significant increase in the dissolved fluxes and a decrease in the particulate fluxes are an indication of the increasing anthropogenic disturbances in the catchment of these tributaries.     

Classification of CM chondrite breccias—Implications for the evaluation of samples from the OSIRIS‐REx and Hayabusa 2 missions

CM chondrites are complex impact (mostly regolith) breccias, in which lithic clasts show various degrees of aqueous alteration. Here, we investigated the degree of alteration of individual clasts within 19 different CM chondrites and CM‐like clasts in three achondrites by chemical analysis of the tochilinite‐cronstedtite‐intergrowths (TCIs; formerly named “poorly characterized phases”). To identify TCIs in various chondritic lithologies, we used backscattered electron (BSE) overview images of polished thin sections, after which appropriate samples underwent electron microprobe measurements. Thus, 75 lithic clasts were classified. In general, the excellent work and specific criteria of Rubin et al. (2007) were used and considered to classify CM breccias in a similar way as ordinary chondrite breccias (e.g., CM2.2‐2.7). In BSE images, TCIs in strongly altered fragments in CM chondrites (CM2.0‐CM2.2) appear dark grayish and show a low contrast to the surrounding material (typically clastic matrix), and can be distinguished from TCIs in moderately (CM2.4‐CM2.6) or less altered fragments (CM2.7‐CM2.9); the latter are bright and have high contrast to the surroundings. We found that an accurate subclassification can be obtained by considering only the “FeO”/SiO₂ ratio of the TCI chemistry. One could also consider the TCIs’ S/SiO₂ ratio and the metal abundance, but these were not used for classification due to several disadvantages. Most of the CM chondrites are finds that have suffered terrestrial weathering in hot and cold deserts. Thus, the observed abundance of metal is susceptible to weathering and may not be a reliable indicator of subtype classification. This study proposes an extended classification scheme based on Rubin’s scale from subtypes CM2.0‐CM2.9 that takes the brecciation into account and includes the minimum to maximum degree of alteration of individual clasts. The range of aqueous alteration in CM chondrites and small spatial scale of mixing of clasts with different alteration histories will be important for interpreting returned samples from the OSIRIS‐REx and Hayabusa 2 missions in the future.