Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Geochemical study of the redistribution of elements in soil—I. Evaluation of degree of weathering of transported soil materials by distribution of major elements among the particle size fractions and soil extract

Sixteen alluvial and terrace soils from Japan and Thailand were separated into six fractions ; an amorphous sesquioxide and combined organic matter fraction, crystalline sesquioxides, clay, silt, fine sand and coarse sand. Content of ten major and minor elements in these six fractions was analyzed; SiO₂, A1₂O₃, Fe₂O₃, MgO, CaO, K₂O, TiO₂, Rb₂O and SrO were determined by X-ray fluorescence spectrometry, and Na₂O was determined by neutron activation analysis. The clay, silt, fine sand and coarse sand mineralogy were estimated semi-quantitatively by X-ray diffraction methods.We propose three indices of geochemical maturity for the soils and test their usefulness as measures of the degree of weathering. Three concomitant factors are proposed to measure the relative resistate, hydrolyzate and oxidate nature of the major elements in the soils.     

Phytoplankton dynamics in Lake Biwa during the 20th century: complex responses to climate variation and changes in nutrient status

We examined algal remains and fossil pigments in ²¹⁰Pb-dated sediment cores from Lake Biwa to explore historical changes in the phytoplankton community of the lake over the past 100 years and to identify environmental factors that caused those changes. Fluxes of fossil pigments and algal remains were very low before the 1960s, but increased through the 1960s and 1970s, indicating that the lake had eutrophied in the 20 years since 1960. After 1980, however, fluxes of all fossil pigments and algal remains decreased or stabilized. Redundancy analysis with meteorological and limnological variables explained more than 70% of the variation of these fluxes and showed that the decrease in fluxes of most algal taxa that occurred in the 1980s was related to changes in meteorological variables such as wind velocity, rather than changes in the lake’s trophic state. Sedimentary records of algal remains also revealed that Aulacoseira nipponica, an endemic diatom species that grows in winter, decreased dramatically after 1980, while Fragilaria crotonensis, a cosmopolitan spring diatom species, became dominant. Replacement of one dominant diatom species by another could not be explained simply by changes in the lake trophic state, but was reasonably strongly related with an increase in winter water temperature. These results suggest that the phytoplankton community in Lake Biwa was influenced by changes in local environmental conditions (nutrient loading) through the 1960s and 1970s, but more so by regional (meteorological) and global (climate warming) factors since 1980.     

Analytical study on vulnerability functions for casualty estimation in the collapse of adobe buildings induced by earthquake

Collapse of adobe buildings during an earthquakes with various earthquake intensities is analyzed using the 3-dimensional distinct element method code developed by the first author. Firstly, we evaluate structural damage with damage index, interior-space damage with w score, and human casualties in the collapsing buildings with three casualty criteria. Secondly, we investigate relationships between the earthquake intensity, the structural damage, the interior-space damage, and the casualties. It is found that the casualties have stronger correlation with the interior-space damage than the structural damage, and three vulnerability functions, namely, structural, interior-space and casualty vulnerability functions, are proposed. Effects of reinforcing methods on these functions are also examined. Finally, a series of analytical procedures to develop vulnerability functions and to estimate casualties using the functions are described.     

Full‐scale shaking table test of a base‐isolated medical facility subjected to vertical motions

Base isolation is a well known technology that has been proven to reduce structural response to horizontal ground accelerations. However, vertical response still remains a topic of concern for base‐isolated buildings, perhaps more so than in fixed‐base buildings as isolation is often used when high performance is required. To investigate the effects of vertical response on building contents and nonstructural components, a series of full‐scale shaking table tests were conducted at the E‐Defense facility in Japan. A four‐story base‐isolated reinforced concrete building was outfitted as a medical facility with a wide variety of contents, and the behavior of the contents was observed. The rubber base isolation system was found to significantly amplify vertical accelerations in some cases. However, the damage caused by the vertical ground motions was not detrimental when peak vertical floor accelerations remained below 2 g with three exceptions: (1) small items placed on shelves slid or toppled; (2) objects jumped when placed on nonrigid furniture, which tended to increase the response; and (3) equipment with vertical eccentricities rocked and jumped. In these tests, all equipment and nonstructural components remained functional after shaking. Copyright © 2013 John Wiley & Sons, Ltd.     

Impact-induced phyllosilicate formation from olivine and water

Shock-recovery experiments on mixtures of olivine and water with gas (air) were performed in a previous study to demonstrate water-mineral interactions during impact events (Furukawa et al., 2007). The products of these former experiments were investigated in the present study using transmission electron microscopy, scanning electron microscopy, and X-ray powder diffraction with the aim of finding evidence of aqueous alteration. Serpentine formed on the surface of shocked olivine with well-developed mosaicism. The yield of serpentine depended on the water/olivine ratio in the starting material, indicating progressive serpentinization under water-rich conditions. Comminution and mosaicism were developed in shocked olivine grains. The temperature and pressure changes of the samples during the experiments were estimated by constructing Hugoniots for mixtures of olivine and water, combined with the results of an additional fracturing experiment on a shocked container. Pressures and temperatures reached 4.6-7.2 GPa and at least 230-390 °C, respectively, for 0.7 μs during in-shock compression. Post-shock temperatures reached a maximum of ∼1300 °C, when the shock wave reached the gas in the sample cavity. The serpentine formed after the post-shock temperature maximum, most likely when temperatures dropped to between 200 and 400 °C. This is the first experiment to demonstrate the formation of phyllosilicates using heat supplied by an impact. The present results and estimations suggest that phyllosilicates could form as a result of impacts into oceans as well as by impacts on terrestrial and Martian crustal rocks, and on some asteroidal surfaces, where liquid or solid H₂O is available. A significant amount of phyllosilicates would have formed during the late heavy bombardment of meteorites on the Hadean Earth, and such phyllosilicates might have affected the prebiotic carbon cycle.     

Electron microscopy studies of akermanites (Ca1−xSrx)2CoSi2O7 with modulated structure

Single crystals of akermanite (Ca_1–x Sr _x )₂Co-Si₂O₇ solid solution were grown in nitrogen by the floating zone method using a lamp-image furnace. The grown crystals were 6 mm in diameter by 50 mm in length. Microprobe analyses indicate uniform strontium content x except in the initially crystallized part. Synthetic crystals with x from 0.0 to 0.3 give, at room temperature, satellite reflections and circular diffuse scatterings in the electron diffraction pattern, which are related to an incommensurate phase and microdomains, respectively. With increasing Sr content the wavelength of a modulation increases and the intensity of satellites decreases, but the intensity of circular diffuse scattering increases up to x=0.15 and then decreases until eventually the satellites and the circular diffuse scatterings disappear at x = 0.3. The circular diffuse scattering is explained by the cluster model for the transition state, proposed by De Ridder et al. (1976).     

Sedimentary records of multidecadal-scale variability of diatom productivity in the Bungo Channel, Japan, associated with the Pacific Decadal Oscillation

In order to examine the responses of primary productivity in the southern coastal sea of Japan to the Pacific Decadal Oscillation (PDO) in the 20th century, sedimentary records of diatom productivity (diatom valve fluxes) were reconstructed using core samples from the Bungo Channel (BC) in southwest Japan. The record of the Thalassionema spp. flux—the best index of fall primary productivity in the BC—indicated a multidecadal-scale duration with a low flux (1943–1982) and those with a high flux (1913–1943 and 1982–2001); apparent shifts were recognized in 1943 and 1982. The shift in 1982 was also recognized in the flux records of other early summer to fall predominant genera in the BC and, previously, in the biogenic silica records from a broad region of the southeast BC. This indicates that in our records, this shift reflects a general trend in the primary production in the southeast BC. A comparison among the Thalassionema spp. flux records, meteorological data from an observatory adjacent to the core site, and the PDO index showed that the flux records were more similar to the PDO index than the other meteorological records, which suggests that the multidecadal-scale variability of the BC primary productivity may be associated with some marine-derived forcing. The bottom intrusions of nutrient-rich water that upwelled from the shelf slope into the BC, the axis movement or the transport of the Kuroshio Current off the BC, and a basin-scale wind stress in the North Pacific might play an important role in this forcing and mediate between the BC primary productivity and the PDO.