2060 Chiron back to a minimum of brightness

The results of photometric observations of comet/asteroid 2060 Chiron at the Observatório do Pico dos Dias (Brazil-OPD) and the Observatoire de Haute-Provence (France-OHP) during 1994 and 1995 are presented. The analysis of the data shows a decrease of 2060 Chiron brightness from its peak values of 1988–1991. The absolute magnitude, H_v, varies from a maximum of 6.6 in February 1994 up to a minimum of 6.8 in June 1995. Therefore 2060 Chiron is back to a minimum of activity close to that of 1983–1985. The slope parameter G is found to be G = 0.71 ± 0.15. It is suggested that the H-G magnitude system, generally adopted to present 2060 Chiron brightness, is not the most appropriate due to the cometary activity of this object.     

Age and depositional environment of the Draa Sfar massive sulfide deposit, Morocco

The Draa Sfar mineralization consists of two main stratabound orebodies, Sidi M’Barek and Tazacourt, located north and south of the Tensift River (“Oued Tessift”), respectively. Each orebody is comprised by at least two massive sulfide lenses. The hosting rocks are predominantly black shales, although minor rhyolitic rocks are also present in the footwall to the southern orebody. Shales, rhyolitic volcanic rocks, and massive sulfides are all included into the Sarhlef Series, which is recognized as one of the main stratigraphic units of the Moroccan Variscan Meseta. Hydrothermal activity related with an anomalous thermal gradient, together with a high sedimentation rate in a tectonically driven pull-apart marine basin, favored the accumulation of organic-rich mud in the deepest parts of the basin and the sedimentary environment suitable for massive sulfide deposition and preservation. This took place by replacement of the hosting unlithified wet mud below the sediment–water interface. Geochemical data suggest a sedimentary environment characterized by oxic water column and anoxic sediment pile with the redox boundary below the sediment–water interface. The low oxygen availability within the sediment pile inhibited oxidation and pyritization of pyrrhotite. Biostratigraphic analysis, based on the palynological content of the hosting black shales, restricts the age of the sulfides to the Asbian substage (mid-Mississippian). This age is consistent with earlier geochronological constraints.     

Impact evaluation on groundwater of the infiltration of an urban wastewater geopurification system placed over a detrital aquifer in a semiarid region (Spain)

Over a period of 4 years and 4 months, the geopurification installations at Dehesas de Guadix (Granada, Spain) were monitored to determine the impact on soil and groundwater of the controlled discharge of urban wastewater, and also to identify the best indicators of the entry of the recharged water into the aquifer. The installations are located in an area where the climate is Mediterranean sub-arid, with an average precipitation of less than 287 mm/year, and a rate of evapotranspiration that is almost three times greater. The system was controlled by determining the balance of majority nutrients and boron in the soil and in the groundwater, both at the points affected directly by the wastewater discharge and at others. The quantity of mass discharged was relatively large (COD 14,656 g/m², NO₃ 85 g/m², NO₂ 4 g/m², NH₄ 2,425 g/m², PO₄ 1,143 g/m², K 1,531 g/m², B 63 g/m²). It was observed that the elimination of nutrients within the soil (COD 97.5%, PO₄ 94.4%, K 59.17%, N _total 18.8%, B 12.69%) was very efficient except for the nitrogen, which nevertheless did not reach the groundwater, as it was eliminated at deep levels of the unsaturated zone. Only 12.69% of the boron was removed, and appreciable, increasing amounts of this element did reach the groundwater. Unexpectedly, none of the majority nutrients behaved as a reliable indicator of the impact on groundwater; despite this, the boron and the bicarbonate did clearly reflect the arrival of the recharged water, and are proposed as the best indicators.     

Intercomparison of coastal area morphodynamic models

Five different coastal area morphodynamic models have been set up to run on the same offshore breakwater layout and an intercomparison carried out on the hydrodynamic and morphodynamic output produced by each scheme. In addition, the predicted morphodynamics was checked against available laboratory and field data.It is concluded that the models are capable of producing realistic estimates for the dominant morphodynamic features associated with offshore breakwaters. Coupling of the wave, current and sediment transport components of each scheme is shown to yield bathymetry which attains a state of equilibrium, unlike models which are based on the initial transport field only.     

Spatially resolved spectroscopic observations of Jupiter during the 1987 opposition

Spectroscopic observations in the spectral region 6000–6600 » of major belts and zones of Jupiter have been carried out at Calar Alto Observatory (Spain) during the 1987 opposition, in support to the International Jupiter Watch Program. More than a hundred long-slit, medium resolution spectra have been taken at the coudé focus of the 1.52 m telescope. The longitudinal and latitudinal distribution of the equivalent widths of the methane and ammonia absorption bands at 6190 » and 6450 » have been investigated. Unlike the CH₄-6190 » band, the longitudinal distribution in the NH₃-6450 » band shows asymmetries in some of the Jovian regions analyzed, being the absorption greater at West than at East limbs. These results are interpreted in terms of inhomogeneous scattering models by the simultaneous variation of the NH₃ cloud optical thickness and its altitude level. The north-south scans show little latitudinal dependence on absorption in both methane and ammonia bands, although some relationship could be established between the absorption and relative continuum reflectivity variation.

---

Resumen Se presentan los resultados obtenidos de las observaciones espectroscópicas de las principales zonas y cinturones de Júpiter realizadas durante la oposición de 1987 como una contribución al International Jupiter Watch Program. Las observaciones fueron llevadas a cabo haciendo uso del foco coudé del telescopio de 1.52 m del observatorio hispanoalemán de Calar Alto (España), habiéndose obtenido algo más de cien espectros, de resolución media, en la región espectral de 6000–6600 ». Se exponen los resultados de las anchuras equivalentes de las bandas de absorción del metano en 6190 » y del amoniaco en 6450 », estudiándose, al mismo tiempo, la distribución tanto longitudinal como latitudinal de las mismas. Mientras que los resultados para la banda del metano presentan un comportamiento simétrico en todas las regiones analizadas, las anchuras equivalentes para la banda NH₃-6450 » presentan un comportamiento asimétrico en algunas regiones del planeta, con una mayor absorción hacia el limbo del oeste que hacia el del este. Los resultados son interpretados en base a un modelo de scattering no homogéneo, variando, simultáneamente, el espesor óptico y la altitud de la nube de amoniaco. Los espectros tomados en la dirección norte-sur, aunque presentan una dependencia latitudinal pequeña en la absorción de las bandas mencionadas, sugieren una relación entre la absorción y las variaciones de reflectividad en el continuo.

---

---

Also at Departamento de Física Aplicada, Facultad de Ciencias, Universidad de Granada, Campus Universitario Fuentenueva, Granada, Spain.     

X-ray imaging of three flares during the impulsive phase

The impulsive phases of three flares that occurred on April 10, May 21, and November 5, 1980 are discussed. Observations were obtained with the Hard X-ray Imaging Spectrometer (HXIS) and other instruments aboard SMM, and have been supplemented with Hα data and magnetograms. The flares show hard X-ray brightenings (16–30 keV) at widely separated locations that spatially coincide with bright Hα patches. The bulk of the soft X-ray emission (3.5–5.5 keV) originates from in between the hard X-ray brightenings. The latter are located at different sides of the neutral line and start to brighten simultaneously to within the time resolution of HXIS. Concluded is that:

1. The bright hard X-ray patches coincide with the footpoints of loops.
2. The hard X-ray emission from the footpoints is most likely thick target emission from fast electrons moving downward into the dense chromosphere.
3. The density of the loops along which the beam electrons propagate to the footpoints is restricted to a narrow range (10⁹ < n < 2 × 10¹⁰ cm^-3), determined by the instability threshold of the return current and the condition that the mean free path of the fast electrons should be larger than the length of the loop.
4. For the November 5 flare it seems likely that the acceleration source is located at the merging point of two loops near one of the footpoints.

It is found that the total flare energy is always larger than the total energy residing in the beam electrons. However, it is also estimated that at the time of the peak of the impulsive hard X-ray emission a large fraction (at least 20%) of the dissipated flare power has to go into electron acceleration. The explanation of such a high acceleration efficiency remains a major theoretical problem.     

Spatial and temporal evolution of soft and hard X-ray emission in a solar flare

We study the spatial and temporal characteristics of the 3.5 to 30.0 keV emission in a solar flare on April 10, 1980. The data were obtained by the Hard X-ray Imaging Spectrometer aboard the Solar Maximum Mission Satellite. It is complemented in our analysis with data from other instruments on the same spacecraft, in particular that of the Hard X-ray Burst Spectrometer.Key results of our investigation are: (a) Continuous energy release is needed to substain the increase of the emission through the rising phase of the flare, before and after the impulsive phase in hard X-rays. The energy release is characterized by the production of hot (5 × 10⁷ T 1.5 × 10⁸ K) thermal regions within the flare loop structures. (b) The observational parameters characterizing the impulsive burst show that it is most likely associated with non-thermal processes (particle acceleration). (c) The continuous energy release is associated with strong chromospheric evaporation, as evidenced in the spectral line behavior determined from the Bent Crystal Spectrometer data. Both processes seem to stop just before flare maximum, and the subsequent evolution is most likely governed by the radiative cooling of the flare plasma.     

Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses.