排序方式: 共有22条查询结果,搜索用时 31 毫秒
1.
Miroslav Krs František Novák Marta Krsová Petr Pruner Jiří Jansa 《Studia Geophysica et Geodaetica》1993,37(4):382-400
Summary This study is a follow up of the investigation of some magnetic properties and metastability of greigite in samples obtained from Miocene claystones in the Kruné hory (Erzgebirge) Piedmont basins (Bohemia). Three different methods of upgrading the smythite were applied; the magnetic properties of the concentrates are compared. The thermal conversion of smythite sets in at 200°C while greigite converts at 250°C. The first intermediate products to be formed are iron sulphides, marcasite clearly dominating over pyrite and pyrrhotite. Apart from a Fe3+ sulphate with a composition of Fe2(SO4)3, oxidation of these sulphides gives rise to -Fe2O3. The result of the subsequent decomposition of the mentioned sulphate is the formation of -Fe2O3, which retains the sulphate structure. The final product of the thermal decomposition at 800°C is -Fe2O3. In the smythite concentrate the conversion to Fe3+ sulphate and -Fe2O3 is about twice as intensive as in greigite. No direct conversion to -Fe2O3 was found. During the thermal process self-reversals of remanence were observed, in various samples as many as four reversals in the temperature interval from 340 to 590°C. The occurrences of self-reversals of remanence were only observed at high degrees of thermal demagnetization, of the order of 10–2 down to 10–3 in the temperature interval of sulphide origin (below 400°C), and of the order of 10–4 down to 10–6 in the temperature interval of Fe-oxides origin (above 400°C).Presented at the 3rd Conference on New Trends in Geomagnetism, Castle of Smolenice, Czechoslovakia, June 22–29, 1992 相似文献
2.
LIU Shugen HUANG Wenming JANSA Luba F. WANG Guozhi SONG Guangyong ZHANG Changjun SUN Wei MA Wenxin 《《地质学报》英文版》2014,88(5):1466-1487
Hydrothermal Dolomite (HTD) is present in the Upper Sinian (Upper Proterozoic) Dengying Formation, east Sichuan Basin, China. The strata are comprised by primary dolomite. The HTD has various textures, including zebra dolomite, subhorizontal sheet-like cavities filled by saddle dolomite and breccias cemented by saddle dolomites as well occur as a fill of veins and fractures. Also co-occur MVT type lead-zinc ores in the study area. The δ13C and δ18O isotopes of HTD in the Upper Sinian Dengying Formation are lighter than those of the host rocks, while STSr/86Sr is higher. The apparent difference in carbon, oxygen and strontium isotopes, especially the large difference in S7Sr/S6Sr isotopes ratio indicate crystallization from hot basinal and/or hydrothermal fluids. Saddle dolomite was precipitated at temperatures of 270-320℃. The diagenetic parasequences of mineral assemblage deposited in the Dengying Formation are: (1) dolomite host rock →sphalerite-galena-barite-fluorite; (2) dolomite host rock →saddle dolomite →quartz; (3) dolomite host rock →saddle dolomite→bitumen; (4) dolomite host rock →saddle dolomite →barite. The mean chemical composition of the host dolomite matrix and HTD didn't change much during hydrothermal process. The fluids forming the HTDs in the Dengying Formation were mixtures of freshwater from the unconformity at the top of Sinian, fluids from diagenetic compaction and hydrocarbon generation & expulsion from the Lower Cambrian Niutitang Formation mudstones or the Doushantuo Formation silty mudstones, and hydrothermal fluids from the basement. The hydrocarbon reservoirs associated with the HTD were mostly controlled by the basement faults and fractures and karsting processes at the unconformity separating Sinian and Cambrian strata. The hydrocarbon storage spaces of HTD included dissolved cavities and intercrystalline pores. Dissolution cavities are extensive at the top of Dengying Formation, up to about 46m below the unconformity between Sinian an 相似文献
3.
Geochemical and mineralogical analyses, in addition to isothermal adsorption experiments on field samples, are used to characterise the sedimentary environments, reservoirs and adsorbed gas of the Upper Ordovician Wufeng–lower Silurian Longmaxi formations in the Sichuan Basin and its peripheral areas. The sedimentary environment of the Wufeng and the lower part of Longmaxi formations is a deep-water shelf with five different lithologies identified: siliceous shale, black shale, siltstone, biolithite limestone and bentonite. The black shale in the Wufeng and the lower part of Longmaxi formations is 50 m thick, with an average organic carbon content (TOC) of 3.81 wt% and a maturity (Ro) of 1.62%. Quartz comprises 54.94 vol% of the shale and positively correlates with the TOC. Micropores in the black shale include intergranular pores, intragranular pores, organic matter pores and microfractures. Among these pores, spaces between clay sheets and organic molecules represent a favourable storage space for the accumulation and preservation of oil and gas. The Langmuir volume parameter ranges between 1.52 and 3.01 cm3/g, with an average value of 2.33 cm3/g. The presence of organic matter pores and pores between clay sheets in the black shale is the main and controlling factor for accumulated gas. 相似文献
4.
西藏南部上白垩统大洋红层岩石类型有碳酸盐岩、泥质岩和硅质岩. 碳酸盐岩又细分为红色有孔虫颗粒灰岩、红色生物碎屑泥晶灰岩、红色含微体生物泥晶灰岩、红色泥晶灰岩、红色-杂色内碎屑砾状灰岩等类型; 泥质岩主要为红色页岩; 硅质岩有红色放射虫岩、红色(含)放射虫硅质岩、红色硅质岩. 红色页岩沉积环境为碳酸钙补偿面(CCD)之下、受浊流影响的下斜坡/盆地相; 而红色灰岩为远洋沉积环境下由先成的较浅水上斜坡红色灰岩层通过滑移、滑塌沉积在下斜坡页岩内. 野外观察、显微镜、扫描电子显微镜、X射线衍射和漫反射数据表明, 细小的、分散状出现的赤铁矿是导致藏南上白垩统大洋红层呈现红色的根本原因, 赤铁矿不是碎屑来源的, 而是同沉积期-成岩早期阶段的产物. 无论是红色页岩还是红色灰岩, 都以出现高含量Fe2O3和低含量FeO为特征, 铁主要以三价形式出现, 指示了一种氧化条件. 藏南大洋红层沉积时期, 在东特提斯洋上斜坡-下斜坡-盆地环境下广泛出现高含量溶解氧的氧化条件, 导致该条件出现的主要因素是气候变冷、洋流活动和海洋-大气氧通量改变. 相似文献
5.
In the equatorial western Pacific, iron-manganese oxyhydroxide crusts(Fe-Mn crusts) and nodules form on basaltic seamounts and on the top of drowned carbonate platform guyots that have been swept free of pelagic sediments. To date, the Fe-Mn crusts have been considered to be almost exclusively of abiotic origin. However, it has recently been suggested that these crusts may be a result of biomineralization. Although the Fe-Mn crust textures in the equatorial western Pacific are similar to those constructed by bacteria and algae, and biomarkers also document the existence of bacteria and algae dispersed within the Fe-Mn crusts, the precipitation, accumulation and distribution of elements, such as Fe, Mn, Ni and Co in Fe-Mn crusts are not controlled by microbial activity. Bacteria and algae are only physically incorporated into the crusts when dead plankton settle on the ocean floor and are trapped on the crust surface. Geochemical evidence suggests a hydrogenous origin of Fe-Mn crusts in the equatorial western Pacific, thus verifying a process for Fe-Mn crusts that involves the precipitation of colloidal phases from seawater followed by extensive scavenging of dissolved trace metals into the mineral phase during crust formation. 相似文献
6.
Xiumian Hu L. Jansa Lei Chen W.L. Griffin S.Y. O'Reilly Jiangang Wang 《Sedimentary Geology》2010,223(3-4):193-205
Lower Cretaceous volcanic lithic arenites, widely distributed in the Tethyan Himalaya, provide insights into the continental breakup of Eastern Gondwana. In southern Tibet they are represented by the Wölong Volcaniclastics. The volcanic rocks that contributed clastic material to the lower parts of this unit were predominantly alkali basalts, whereas rhyolitic/dacitic volcanism becomes the predominant source of the upper strata. Geochemical analyses of basaltic grains and of detrital Cr-spinels from the Wölong Volcaniclastics demonstrate the alkaline character of the volcanism and suggest “within-plate” tectonic setting for the volcanism. Zircon U–Pb ages confirm that this volcanism continued from ~ 140 Ma to ~ 119 Ma. Hf-isotope data on these Early Cretaceous zircons indicate that their parental magmas were mantle-derived, but in the later stage of magmatic activity mantle-derived magmas were mixed with partial melts derived from the continental crust.The Lower Cretaceous volcaniclastics occur along a broad belt paralleling the northern margin of Greater India. The onset of volcaniclastic deposition in the Himalayas appears to become progressively younger toward the west, but it ended synchronously during the Late Albian (~ 102 Ma). The low volume of volcanic rocks and their intra-plate tectonic setting suggest that they are the result of decompressional melting along extensional deep-seated fractures cross-cutting the continental crust, and reflect changes in regional intra-plate tectonic stresses when Greater India began to separate from the Australia–Antarctica supercontinent. 相似文献
7.
The objective of this contribution is analyzing, visualizing, interpreting and discussing the impacts of anthropogenic influences
on karst geomorphology through various geomorphologically based environmental indicators. The primary data sources are digital
terrain models (DTMs) as continuous surface data, supported by aerial photographs, satellite images, topographic maps and
databases of natural and anthropogenic features. The sources are supplemented by written information about surface changes
and in situ inspections. Spatial analyses as quantitative methods in combination with enhanced visualizations as qualitative
methods performed in a geographical information system (GIS) on different data sets are introduced as an important methodology.
This enables explaining many anthropogenic influences on the terrain surface (landform), which were not perceived before by
classical surveying techniques and verifications. 相似文献
8.
This study of the Paleocene–Eocene boundary within a foreland basin of southern Tibet, which was dominated by a carbonate ramp depositional environment, documents more complex environmental conditions than can be derived from studies of the deep oceanic environment. Extinction rates for larger foraminiferal species in the Zongpu-1 Section apply to up to 46% of the larger foraminiferal taxa. The extinction rate in southern Tibet is similar to rates elsewhere in the world, but it shows that the Paleocene fauna disappeared stepwise through the Late Paleocene, with Eocene taxa appearing abruptly above the boundary. A foraminifera turnover was identified between Members 3 and 4 of the Zongpu Formation—from the Miscellanea–Daviesina assemblage to an Orbitolites–Alveolina assemblage. The Paleocene and Eocene boundary is between the SBZ 4 and SBZ 5, where it is marked by the extinction of Miscellanea miscella and the first appearance of Alveolina ellipsodalis and a large number of Orbitolites. Chemostratigraphically, the δ13C values from both the Zongpu-1 and Zongpu-2 Sections show three negative excursions in the transitional strata, one in Late Paleocene, one at the boundary, and one in the early Eocene. The second negative excursion of δ13C, which is located at the P–E boundary, coincides with larger foraminifera overturn. These faunal changes and the observed δ13C negative excursions provide new evidence on environmental changes across the Paleocene–Eocene boundary in Tibet. 相似文献
9.
Upper Cretaceous oceanic red beds in southern Tibet:Lithofacies,environments and colour origin 总被引:6,自引:0,他引:6
Jansa Luba 《中国科学D辑(英文版)》2006,49(8):785-795
10.
Anatolii V. Fisenko Sasha B. Verchovsky Andrei A. Shiryaev Luba F. Semjonova 《Meteoritics & planetary science》2017,52(1):60-71
A nanodiamond‐rich fraction (NDF) separated from the Orgueil meteorite was subjected to a high‐intensity ultrasonic treatment in a weakly acidic aqueous solution. After sedimentation by centrifugation, two fractions of grains (suspension, designated as OD7C and sediment, designated as OD7D) with different properties have been obtained. The following effects of the sonication were revealed from comparison of the contents and isotope compositions of C, N, and Xe released during stepped pyrolysis and combustion of the fractions OD7C and OD7D, the initial NDF and two grain‐size fractions (OD10 and OD15) produced without sonication (a) surface layer of the sonicated diamond grains is modified to different extent in comparison with nontreated ones, (b) in some grains concentrations of the bulk N and Xe a reduced significantly, and (c) nondiamond nitrogen containing phases (e.g., Si3N4) have been destroyed. It is suggested that combined effects of the sonication and centrifugation observed for the fractions OD7C and OD7D are due to differences in surface chemistry of the nanodiamond grains, which statistically influences behavior of nanoparticles during the sonication resulting in their preferential modification in the different reaction zones of the cavitating fluid. 相似文献