Hillslope erosion measurement—a simple approach to a complex process

The measurement of hillslope erosion can be a difficult, costly and time‐consuming activity. Many techniques are available, ranging from using environmental tracers, to LiDAR. Erosion measurements using erosion pins are assessed and compared with regional scale erosion data, hillslope data obtained using ¹³⁷Cs and erosion modelling results. The pins produced erosion rates which are within the range determined using ¹³⁷Cs and model data but above that of regional denudation rates. Our findings demonstrate that inexpensive erosion pins can provide reliable data on hillslope erosion. © 2015 Commonwealth of Australia. Hydrological Processes © 2015 John Wiley & Sons Ltd.     

The geochemistry of uranium occurrences and speciation in groundwater of Chinnar sub basin,South India

An attempt has been made in Chinnar sub basin of Dharmapuri district, South India to isolate the geochemistry of uranium occurrences in groundwater. The geology of the area is mainly of charnockite and granite gneiss. Groundwater samples were collected for two different seasons post and pre monsoon in two different litho units (granite gneiss and charnockite) and analysed for major, minor and uranium concentrations. Higher uranium (18.45 μg L^?1) has been recorded during pre monsoon season in granite gneiss with increasing pH. The saturation index calculation for the groundwater isolated minerals like uaraninite, coffinite, haiweeite and soddyite to be precipitating and uranium oxides like UO_2.25, UO_2.25beta, UO_2.33beta as oversaturated. The Eh-pH diagram attempted represents solubility of uraninite within the pH range of 6.0 to 8.0. The study isolate uranium in groundwater of the study area is controlled by the presence of (U₄O₉) uranium oxide.     

Seasonally and spatially referenced estimates of recreational shore-angling effort,catch composition,catch rates and total catch in the Goukamma Marine Protected Area,South Africa

A roving creel survey of the recreational shore fishery along the 16.4-km coastline in the Goukamma Marine Protected Area on the south coast of South Africa was conducted from 2009 to 2011. Some 838 patrols were stratified equally among months, areas and years, but intentionally biased towards weekends. Angler densities at Buffalo Bay and Groenvlei were 0.59 and 0.28 anglers km?1, respectively. Weekend densities were double to quadruple weekday densities and fishing during winter was more popular than during summer. Area, habitat and distance to access points explained variation in angler densities. Shannon–Wiener diversity in catches declined from 2.18 in an earlier (1993–2002) survey to 1.79. Although the order of species abundance in the catches remained largely unchanged, blacktail Diplodus capensis dominance increased to 57.3% by number, at the expense of galjoen Dichistius capensis. Habitat explained 27% of the variance in catch composition. The catch per unit effort (CPUE) for the top nine species ranged from 0.19 to 6.35 fish 100-h?1. The CPUE of all species, except spotted grunter Pomadasys commersonnii, declined. Blacktail and galjoen CPUE declined by 17% and 77%, respectively. The total catch estimate was 2 986 fish y?1. Transgressions of size limits were common. The results suggest that the fishery is overexploited and that catch rates are declining.     

Location-based environmental factors contributing to rainfall-triggered debris flows in the Ba river catchment,northwest Viti Levu island,Fiji

Mass movements in tropical Pacific small island developing states (SIDS) can be devastating although studies are relatively few and contributing environmental factors are not often investigated in detail. On 25 January 2012, following 3 days of heavy monsoonal rainfall (c. 550 mm) during a La Niña episode, more than 150 debris flows were triggered in the western part of the Ba river catchment of northwest Viti Levu island, Fiji. Reconnaissance field survey and geographical information system (GIS) analyses using high-resolution satellite imagery were carried out to investigate factors that may have led to the occurrence of the debris flows in the catchment. We evaluated the correlation between the density of mass movements (number of mass movements/km²) and several continuous variables using data measured within the GIS. There was a weak but significant positive correlation between mass movement density and elevation (r = 0.38, p value < 0.01), cyclonic precipitation (r = 0.37, p value < 0.01) and stream density (r = 0.31, p value < 0.01). Ninety-three percent of the mass movements occur within a plantation of Pinus caribaea (Caribbean pine) on slopes oriented mainly to the northeast and east on (trade) windward slopes and may be significant factors for their development. Although forests generally have a stabilizing effect on slopes, the plantation at Ba was a mature stand on its second plantation cycle and is a species that has a shallow rooting system making it more susceptible to failure.     

Evidence for distinct proportions of subducted oceanic crust and lithosphere in HIMU-type mantle beneath El Hierro and La Palma, Canary Islands

Shield-stage high-MgO alkalic lavas from La Palma and El Hierro (Canary Islands) have been characterized for their O-Sr-Nd-Os-Pb isotope compositions and major-, trace-, and highly siderophile-element (HSE: Os, Ir, Ru, Pt, Pd, Re) abundances. New data are also reported for associated evolved rocks, and entrained xenoliths. Clear differences in Pd/Ir and isotopic ratios for high Os (>50 ppt) lavas from El Hierro (δ¹⁸O_olivine = 5.17 ± 0.08‰; ⁸⁷Sr/⁸⁶Sr = 0.7029 to 0.7031; ε_Nd = +5.7 to +7.1; ¹⁸⁷Os/¹⁸⁸Os = 0.1481 to 0.1750; ²⁰⁶Pb/²⁰⁴Pb = 19.1 to 19.7; Pd/Ir = 6 ± 3) versus those from La Palma (δ¹⁸O_olivine = 4.87 ± 0.18‰; ⁸⁷Sr/⁸⁶Sr = 0.7031 to 0.7032; ε_Nd = +5.0 to +6.4; ¹⁸⁷Os/¹⁸⁸Os = 0.1421 to 0.1460; ²⁰⁶Pb/²⁰⁴Pb = 19.5 to 20.2; Pd/Ir = 11 ± 4) are revealed from the dataset.Crustal or lithospheric assimilation during magma transport cannot explain variations in isotopic ratios or element abundances of the lavas. Shallow-level crystal-liquid fractionation of olivine, clinopyroxene and associated early-crystallizing minerals (e.g., spinel and HSE-rich phases) controlled compatible element and HSE abundances; there is also evidence for sub-aerial degassing of rhenium. High-MgO lavas are enriched in light rare earth elements, Nb, Ta, U, Th, and depleted in K and Pb, relative to primitive mantle abundance estimates, typical of HIMU-type oceanic island basalts. Trace element abundances and ratios are consistent with low degrees (2-6%) of partial melting of an enriched mantle source, commencing in the garnet stability field (?110 km). Western Canary Island lavas were sulphur undersaturated with estimated parental melt HSE abundances (in ppb) of 0.07 ± 0.05 Os, 0.17 ± 0.16 Ir, 0.34 ± 0.32 Ru, 2.6 ± 2.5 Pt, 1.4 ± 1.2 Pd, 0.39 ± 0.30 Re. These estimates indicate that Canary Island alkali basalts have lower Os, Ir and Ru, but similar Pt, Pd and Re contents to Hawai’ian tholeiites.The HIMU affinities of the lavas, in conjunction with the low δ¹⁸O_olivine and high ²⁰⁶Pb/²⁰⁴Pb for La Palma, and elevated ¹⁸⁷Os/¹⁸⁸Os for El Hierro implies melting of different proportions of recycled oceanic crust and lithosphere. Our preferred model to explain isotopic differences between the islands is generation from peridotitic mantle metasomatised by <10% pyroxenite/eclogite made from variable portions of similar aged recycled oceanic crust and lithosphere. The correspondence of radiogenic ²⁰⁶Pb/²⁰⁴Pb, ¹⁸⁷Os/¹⁸⁸Os, elevated Re/Os and Pt/Os, and low-δ¹⁸O in western Canary Island lavas provides powerful support for recycled oceanic crust and lithosphere to generate the spectrum of HIMU-type ocean island basalt signatures. Persistence of geochemical heterogeneities throughout the stratigraphies of El Hierro and La Palma demonstrate long-term preservation of these recycled components in their mantle sources over relatively short-length scales (∼50 km).     

东天山伊吾二叠纪花岗质杂岩体的锆石定年、地球化学及其构造意义

伊吾花岗质杂岩体主要由二长花岗岩和碱长花岗岩构成。锆石LA-ICP-MS U-Pb定年分析得到二长花岗岩和碱长花岗岩的侵位年龄分别为284.6±1.4Ma和284.0±1.1Ma。结合地质证据,此年龄表明该杂岩体形成于碰撞之后的二叠纪早期挤压-伸展转折阶段。岩石学、地球化学和同位素等方面的对比研究表明这两种岩石为同一岩浆演化的产物。与二长花岗岩相比,碱长花岗岩表现为硅、碱的含量较高,而铝的含量较低;富Th、U、Nb、Ta,贫Sr、P、Ti、Sm;DI和Rb/Sr升高,Nb/Ta和Zr/Hf下降,从二长花岗岩到碱长花岗岩表现出连续分异演化的趋势。计算得到二长花岗岩和碱长花岗岩的模式年龄(t_(DM))分别为693Ma和763Ma,ε_(Nd)(t)分别为+4.53和+4.64,(~(87)Sr/~(86)Sr)_i分别为0.703858和0.703855,表现出高ε_(Nd)(t)低(~(87)Sr/~(86)Sr)_i的特征。这些特征表明,伊吾岩体的岩浆来自新元古代时从亏损地幔分离出来的初生地壳源区。二长花岗岩岩浆是这种初生地壳岩浆演化的产物,而碱长花岗岩形成于二长花岗岩母岩浆经斜长石、磷灰石、钛铁氧化物、榍石、独居石、褐帘石和锆石等矿物分离结晶后的残留岩浆。     

Activity of comets at large heliocentric distances pre-perihelion

We present observational data for two long-period and three dynamically new comets observed at heliocentric distances between 5.8 to 14.0 AU. All of the comets exhibited activity beyond the distance at which water ice sublimation can be significant. We have conducted experiments on gas-laden amorphous ice samples and show that considerable gas emission occurs when the ice is heated below the temperature of the amorphous-crystalline ice phase transition (T∼137 K). We propose that annealing of amorphous water ice is the driver of activity in comets as they first enter the inner Solar System. Experimental data show that large grains can be ejected at low velocity during annealing and that the rate of brightening of the comet should decrease as the heliocentric distance decreases. These results are consistent with both historical observations of distant comet activity and with the data presented here. If observations of the onset of activity in a dynamically new comet are ever made, the distance at which this occurs would be a sensitive indicator of the temperature at which the comet had formed or represents the maximum temperature that it has experienced. New surveys such as Pan STARRS, may be able to detect these comets while they are still inactive.     

Vertically Integrated Hydraulic Conductivity: A New Parameter for Groundwater-Surface Water Analysis

Numerical modeling of groundwater-surface water interactions provides vital information necessary for determining the extent of nutrient transport, quantifying water budgets, and delineating zones of ecological support. The hydrologic data that drive these models are often collected at disparate scales and subsequently incorporated into numerical models through upscaling techniques such as piecewise constancy or geostatistical methods. However, these techniques either use basic interpolation methods, which often simplifies the system of interest, or utilize complex statistical methods that are computationally expensive, time consuming, and generate complex subsurface configurations. We propose a bulk parameter termed “vertically integrated hydraulic conductivity” (K_V), and defined as the depth-integrated resistance to fluid flow sensed at the groundwater-surface water interface, as an alternative to hydraulic conductivity when investigating vertical fluxes across the groundwater-surface water interface. This bulk parameter replaces complex subsurface configurations in situations dominated by vertical fluxes and where heterogeneity is not of primary importance. To demonstrate the utility of K_V, we extracted synthetic temperature time series data from a forward numerical model under a variety of scenarios and used those data to quantify vertical fluxes using the amplitude ratio method. These quantified vertical fluxes and the applied hydraulic head gradient were subsequently input into Darcy's Law and used to quantify K_V. This K_V was then directly compared to the equivalent hydraulic conductivity (K_T) assuming an infinitely extending layer. Vertically integrated hydraulic conductivity allows for more accurate and robust flow modeling across the groundwater-surface water interface in instances where complex heterogeneities are not of primary concern.     

Oxygen isotope heterogeneity of the mantle beneath the Canary Islands: a discussion of the paper of Gurenko et al.

Gurenko et al. (Contrib Mineral Petrol 162:349–363, 2011) report laser-assisted fluorination (LF) and secondary ionization mass spectrometry (SIMS) ¹⁸O/¹⁶O datasets for olivine grains from the Canary Islands of Gran Canaria, Tenerife, La Gomera, La Palma and El Hierro. As with prior studies of oxygen isotopes in Canary Island lavas (e.g. Thirlwall et al. Chem Geol 135:233–262, 1997; Day et al. Geology 37:555–558, 2009, Geochim Cosmochim Acta 74:6565–6589, 2010), these authors find variations in δ¹⁸O_ol (~4.6–6.0 ‰) beyond that measured for mantle peridotite olivine (Mattey et al. Earth Planet Sci Lett 128:231–241, 1994) and interpret this variation to reflect contributions from pyroxenite-peridotite mantle sources. Furthermore, Gurenko et al. (Contrib Mineral Petrol 162:349–363, 2011) speculate that δ¹⁸O_ol values for La Palma olivine grains measured by LF (Day et al. Geology 37:555–558, 2009, Geochim Cosmochim Acta 74:6565–6589, 2010) may be biased to low values due to the presence of altered silicate, possibly serpentine. The range in δ¹⁸O_ol values for Canary Island lavas are of importance for constraining their origin. Gurenko et al. (Contrib Mineral Petrol 162:349–363, 2011) took a subset (39 SIMS analyses from 13 grains from a single El Hierro lava; EH4) of a more extensive dataset (321 SIMS analyses from 110 grains from 16 Canary Island lavas) to suggest that δ¹⁸O_ol is weakly correlated (R ² = 0.291) with the parameter used by Gurenko et al. (Earth Planet Sci Lett 277:514–524, 2009) to describe the estimated weight fraction of pyroxenite-derived melt (Xpx). With this relationship, end-member δ¹⁸O values for HIMU-peridotite (δ¹⁸O = 5.3 ± 0.3 ‰) and depleted pyroxenite (δ¹⁸O = 5.9 ± 0.3 ‰) were defined. Although the model proposed by Gurenko et al. (Contrib Mineral Petrol 162:349–363, 2011) implicates similar pyroxenite-peridotite mantle sources to those proposed by Day et al. (Geology 37:555–558, 2009, Geochim Cosmochim Acta 74:6565–6589, 2010) and Day and Hilton (Earth Planet Sci Lett 305:226–234, 2011), there are significant differences in the predicted δ¹⁸O values of end member components in the two models. In particular, Day et al. (Geochim Cosmochim Acta 74:6565–6589, 2010) proposed a mantle source for La Palma lavas with low-δ¹⁸O (<5 ‰), rather than higher-δ¹⁸O (c.f. the HIMU-peridotite composition of Gurenko et al. in Contrib Mineral Petrol 162:349–363, 2011). Here we question the approach of using weakly correlated variations in δ¹⁸O_ol and the Xpx parameter to define mantle source oxygen isotope compositions, and provide examples of why this approach appears flawed. We also provide reasons why the LF datasets previously published for Canary Island lavas remain robust and discuss why LF and SIMS data may provide complementary information on oxygen isotope variations in ocean island basalts (OIB), despite unresolved small-scale uncertainties associated with both techniques.     

Multi-Source Emission Determination Using an Inverse-Dispersion Technique

Inverse-dispersion calculations can be used to infer atmospheric emission rates through a combination of downwind gas concentrations and dispersion model predictions. With multiple concentration sensors downwind of a compound source (whose component positions are known) it is possible to calculate the component emissions. With this in mind, a field experiment was conducted to examine the feasibility of such multi-source inferences, using four synthetic area sources and eight concentration sensors arranged in different configurations. Multi-source problems tend to be mathematically ill-conditioned, as expressed by the condition number κ. In our most successful configuration (average κ = 4.2) the total emissions from all sources were deduced to within 10% on average, while component emissions were deduced to within 50%. In our least successful configuration (average κ = 91) the total emissions were calculated to within only 50%, and component calculations were highly inaccurate. Our study indicates that the most accurate multi-source inferences will occur if each sensor is influenced by only a single source. A “progressive” layout is the next best: one sensor is positioned to “see” only one source, the next sensor is placed to see the first source and another, a third sensor is placed to see the previous two plus a third, and so on. When it is not possible to isolate any sources κ is large and the accuracy of a multi-source inference is doubtful.