Geomorphic effects of rural-to-urban land use conversion on three streams in the Central Redbed Plains of Oklahoma

This research evaluates the impact of rural-to-urban land use conversion on channel morphology and riparian vegetation for three streams in the Central Redbed Plains geomorphic province (central Great Plains ecoregion) of Oklahoma. The Deep Fork Creek watershed is largely urbanized; the Skeleton Creek watershed is largely rural; and the Stillwater Creek watershed is experiencing a rapid transition from rural to urban land cover. Each channel was divided into reaches based on tributary junctions, sinuosity, and slope. Field surveys were conducted at transects in a total of 90 reaches, including measurements of channel units, channel cross-section at bankfull stage, and riparian vegetation. Historical aerial photographs were available for only Stillwater Creek watershed, which were used to document land cover in this watershed, especially changes in the extent of urban areas (impervious cover).The three streams have very low gradients (< 0.001), width-to-depth ratios < 10, and cohesive channel banks, but have incised into red Permian shales and sandstone. The riparian vegetation is dominated by cottonwoods, ash, and elm trees that provide a dense root mat on stream banks where the riparian vegetation is intact. Channels increased in width and depth in the downstream direction as is normally expected, but the substrate materials and channel units remained unchanged. Statistical analyses demonstrated that urbanization did not explain spatial patterns of changes in any variables. These three channels in the central Redbed Plains are responding as flumes during peak flows, funneling runoff and the wash-load sediment downstream in major runoff events without any effect on channel dimensions. Therefore, local geological conditions (similar bedrock, cohesive substrates and similar riparian vegetation) are mitigating the effects of urbanization.     

Drainage, sediment transport, and denudation rates on the Nanga Parbat Himalaya, Pakistan

The Nanga Parbat Himalaya presents some of the greatest relief on Earth, yet sediment production and denudation rates have only been sporadically addressed. We utilized field measurements and computer models to estimate bank full discharge, sediment transport, and denudation rates for the Raikot and Buldar drainage basins (north slope of Nanga Parbat) and the upper reach of the Rupal drainage basin (south slope).The overall tasks of determining stream flow conditions in such a dynamic geomorphic setting is challenging. No gage data exist for these drainage basins, and the overall character of the drainage basins (high relief, steep flow gradients, and turbulent flow conditions) does not lend itself to either ready access or complete profiling.Cross-sectional profiles were surveyed through selected reaches of these drainage basins. These data were then incorporated into software (WinXSPRO) that aids in the characterization (stage, discharge, velocity, and shear stress) of high altitude, steep mountain stream conditions.Complete field measurements of channel depths were rarely possible (except at several bridges where the middle of the channel could actually be straddled and probed) and, when coupled with velocity measurements, provided discrete points of field-measured discharge calculations. These points were then used to calibrate WinXSPRO results for the same reach and provided a confidence level for computer-generated results.Flow calculations suggest that under near bank full conditions, the upper Raikot drainage basin produces discharges of 61 cm and moves about 11,000 tons day⁻¹ (9980 tons day⁻¹) of sediment through its channel. Bank full conditions on the upper portion of the Rupal drainage basin generate discharges of 84 cm and moves only about 3800 tons day⁻¹ (3450 tons day⁻¹) of sediment. Although the upper Rupal drainage basin moves more water, the lower slope of the drainage basin (0.03) generates a much smaller shear stress (461 Pa) than does the higher slope (0.12) of the upper Raikot drainage basin (1925 Pa).Dissolved and suspended sediment loads were measured from water/sediment samples collected throughout the day and night over a period of 10 days at the height of the summer melt season but proved to be a minor variable in transport flux. Channel bed loads were measured using a pebble count method of bank material and then used to generate ratings curves of bed loads relative to discharge volumes. When coupled with discharge data and basin area, mean annual sediment yield and denudation rates for Nanga Parbat are produced. Denudation rates calculated in this fashion range from 0.2 mm year⁻¹ in the slower, more sluggish Rupal drainage basin to almost 6 mm year⁻¹ in the steeper, faster flowing Raikot and Buldar drainage basins.     

Improved spatial delineation of streambed properties and water fluxes using distributed temperature sensing

A new method was developed for analysing and delineating streambed water fluxes, flow conditions and hydraulic properties using coiled fibre‐optic distributed temperature sensing or closely spaced discrete temperature sensors. This method allows for a thorough treatment of the spatial information embedded in temperature data by creating a matrix visualization of all possible sensor pairs. Application of the method to a 5‐day field dataset reveals the complexity of shallow streambed thermal regimes. To understand how velocity estimates are affected by violations of assumptions of one‐dimensional, saturated, homogeneous flow and to aid in the interpretation of field observations, the method was also applied to temperature data generated by numerical models of common field conditions: horizontal layering, presence of lateral flow and variable streambed saturation. The results show that each condition creates a distinct signature visible in the triangular matrices. The matrices are used to perform a comparison of the behaviour of one‐dimensional analytical heat‐tracing models. The results show that the amplitude ratio‐based method of velocity calculation leads to the most reliable estimates. The minimum sensor spacing required to obtain reliable velocity estimates with discrete sensors is also investigated using field data. The developed method will aid future heat‐tracing studies by providing a technique for visualizing and comparing results from fibre‐optic distributed temperature sensing installations and testing the robustness of analytical heat‐tracing models. Copyright © 2016 John Wiley & Sons, Ltd.     

Design principles for origin-destination flow maps

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.     

Searching for hidden Wolf–Rayet stars in the Galactic plane – 15 new Wolf–Rayet stars

We report the discovery of 15 previously unknown Wolf–Rayet (WR) stars found as part of an infrared (IR) broad-band study of candidate WR stars in the Galaxy. We have derived an empirically based selection algorithm which has selected ∼5000 WR candidate stars located within the Galactic plane drawn from the Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (mid-IR) and Two-Micron All-Sky Survey (near-IR) catalogues. Spectroscopic follow-up of 184 of these reveals 11 nitrogen-rich (WN) and four carbon-rich (WC) WR stars. Early WC subtypes are absent from our sample and none shows evidence for circumstellar dust emission. Of the candidates which are not WR stars, ∼120 displayed hydrogen emission-line features in their spectra. Spectral features suggest that the majority of these are in fact B supergiants/hypergiants, ∼40 of these are identified Be/B[e] candidates.
Here, we present the optical spectra for six of the newly detected WR stars, and the near-IR spectra for the remaining nine of our sample. With a WR yield rate of ∼7 per cent and a massive star detection rate of ∼65 per cent, initial results suggest that this method is one of the most successful means for locating evolved, massive stars in the Galaxy.     

Assessment of troposphere mapping functions using three-dimensional ray-tracing

The troposphere delay is an important source of error for precise GNSS positioning due to its high correlation with the station height parameter. It has been demonstrated that errors in mapping functions can cause sub-annual biases as well as affect the repeatability of GNSS solutions, which is a particular concern for geophysical studies. Three-dimensional ray-tracing through numerical weather models (NWM) is an excellent approach for capturing the directional and daily variation of the tropospheric delay. Due to computational complexity, its use for positioning purposes is limited, but it is an excellent tool for evaluating current state-of-the-art mapping functions used for geodetic positioning. Many mapping functions have been recommended in the past such as the Niell Mapping Function (NMF), Vienna Mapping Function 1 (VMF1), and the Global Mapping Function (GMF), which have been adopted by most IGS analysis centers. A new Global Pressure Temperature model (GPT2) has also been developed, which has been shown to improve upon the original atmospheric model used for the GMF. Although the mapping functions mentioned above use the same functional formulation, they vary in terms of their atmospheric source and calibration approach. A homogeneous data set of three-dimensional ray-traced delays is used to evaluate all components of the mapping functions, including their underlying functional formulation, calibration, and compression method. Additionally, an alternative representation of the VMF1 is generated using the same atmospheric source as the truth data set to evaluate the differences in ray-tracing methods and their effect on the end mapping function. The results of this investigation continue to support the use of the VMF1 as the mapping function of choice when geodetic parameters are of interest. Further support for the GPT2 and GMF as reliable back-ups when the VMF1 is not available was found due to their high consistency with the NWM-derived mapping function. Additionally, a small latitude-dependent bias in station height was found in the current mapping functions. This bias was identified to be due to the assumption of a constant radius of the earth and was largest at the poles and at the equator. Finally, an alternative version of the VMF1 is introduced, namely the UNB-VMF1 which provides users with an independent NWM-derived mapping function to support geodetic positioning.     

The geochemistry of archaean clastic metasediments in relation to crustal evolution,Northeastern Yilgarn Block,Western Australia

Clastic rudaceous metasedimentary rocks range from arkose to ultramafic para-schist in lithology and have high Na, Rb, Ni, Cr and V contents, except for pure arkose which has low Ni, Cr and V. The various arkoses are not comparable chemically with analyses of any Archaean or younger arkose or greywacke. The distinctive geochemistry and immature sedimentology of this clastic sequence (Jones Creek Conglomerate) results from: (a) derivation from sodic granitoid, low-K basaltic, peridotitic and gneissic source areas, (b) sedimentation in a high energy environment close to source areas, and (c) a lack of major post-depositional chemical alteration. Pebbles in the Conglomerate also attest to the local derivation of detritus from both sides of its very elongate outcrop.Following the emplacement (at 2689 ± 17 Ma) and unroofing of a sodic granitoid pluton, the Conglomerate was rapidly deposited in a graben-like basin. An irregular unconformable contact between the Conglomerate and this pluton is preserved locally. Elsewhere contacts with granitoid or supracrustal rocks are tectonised, but the petrology of the Conglomerate indicates that these contacts were unconformities also. Contrary to previous suggestions, it is considered unlikely that the Conglomerate stratigraphically separates an older from a younger supracrustal sequence in this area. The Conglomerate probably represents the last depositional event before the onset of deformation and protracted regional metamophism to the greenschist—amphibolite facies transition. Crustal evolution from the emplacement of the sodic pluton to the cessation of metamorphism probably occupied some 100 Ma rather than 60 Ma as proposed elsewhere.     

Cognitive and Affective Predictors of Illinois Residents’ Perceived Risks from Gray Wolves

Abstract

Increasing wolf populations are a concern for wildlife managers in the Midwestern U.S. Understanding the psychological mechanisms that contribute to public perceptions of risk will enable development of strategies that seek to mitigate these risks, and suggest where outreach efforts may facilitate acceptance of wolves. We examined the psychological factors that influence Illinois residents’ perceived risks from wolves. We hypothesized that individuals’ perceived risks from wolves were a function of their attitudes toward wolves, negative affect toward wolves, and basic beliefs about wildlife. Data were obtained from a survey of the Illinois public (n?=?784). Negative affect and attitudes toward wolves were direct predictors of perceived risks. Basic beliefs predicted attitudes and negative affect toward wolves. Negative affect predicted attitudes. Basic beliefs had direct and indirect effects on perceived risks.     

Investigation of the thermal regime and subsurface properties of a tidally affected,variably saturated streambed

Temperature and moisture content in the variably saturated subsurface are two of the most important physical parameters that govern a wide variety of geochemical and ecological processes. An understanding of thermal and hydraulic processes and properties of transient vadose zones is therefore fundamental in the evaluation of such processes. Here, an investigation of the thermal regime and subsurface properties of a tidally affected, variably saturated streambed is presented. Field and laboratory measurements, as well as a forward numerical model, are jointly employed in the investigation. Temperature, soil moisture, surface level, and water level data were recorded in a transect perpendicular to a tidally driven stream. Frequency‐domain analysis of the subsurface temperature measurements revealed the rapid decay of the tidal temperature driver within the top ～30 cm of sediment. Several techniques were used to evaluate subsurface thermal and hydraulic properties, including thermal conductivity and the soil water retention curve. These properties were used to constrain a forward numerical model that included coupled treatment of relevant variable saturation thermal and hydraulic physics. Even though the investigated vadose zone is intermittent and relatively shallow ( 20 cm), the results illustrate how error can be introduced into heat‐transport calculations if unsaturated conditions are not taken into account.     

A Stream‐Based Methane Monitoring Approach for Evaluating Groundwater Impacts Associated with Unconventional Gas Development

Gaining streams can provide an integrated signal of relatively large groundwater capture areas. In contrast to the point‐specific nature of monitoring wells, gaining streams coalesce multiple flow paths. Impacts on groundwater quality from unconventional gas development may be evaluated at the watershed scale by the sampling of dissolved methane (CH₄) along such streams. This paper describes a method for using stream CH₄ concentrations, along with measurements of groundwater inflow and gas transfer velocity interpreted by 1‐D stream transport modeling, to determine groundwater methane fluxes. While dissolved ionic tracers remain in the stream for long distances, the persistence of methane is not well documented. To test this method and evaluate CH₄ persistence in a stream, a combined bromide (Br) and CH₄ tracer injection was conducted on Nine‐Mile Creek, a gaining stream in a gas development area in central Utah. A 35% gain in streamflow was determined from dilution of the Br tracer. The injected CH₄ resulted in a fivefold increase in stream CH₄ immediately below the injection site. CH₄ and δ¹³C_CH4 sampling showed it was not immediately lost to the atmosphere, but remained in the stream for more than 2000 m. A 1‐D stream transport model simulating the decline in CH₄ yielded an apparent gas transfer velocity of 4.5 m/d, describing the rate of loss to the atmosphere (possibly including some microbial consumption). The transport model was then calibrated to background stream CH₄ in Nine‐Mile Creek (prior to CH₄ injection) in order to evaluate groundwater CH₄ contributions. The total estimated CH₄ load discharging to the stream along the study reach was 190 g/d, although using geochemical fingerprinting to determine its source was beyond the scope of the current study. This demonstrates the utility of stream‐gas sampling as a reconnaissance tool for evaluating both natural and anthropogenic CH₄ leakage from gas reservoirs into groundwater and surface water.