Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.     

Report of the IAU Working Group on Cartographic Coordinates and Rotational Elements: 2009

Every three years the IAU Working Group on Cartographic Coordinates and Rotational Elements revises tables giving the directions of the poles of rotation and the prime meridians of the planets, satellites, minor planets, and comets. This report takes into account the IAU Working Group for Planetary System Nomenclature (WGPSN) and the IAU Committee on Small Body Nomenclature (CSBN) definition of dwarf planets, introduces improved values for the pole and rotation rate of Mercury, returns the rotation rate of Jupiter to a previous value, introduces improved values for the rotation of five satellites of Saturn, and adds the equatorial radius of the Sun for comparison. It also adds or updates size and shape information for the Earth, Mars?? satellites Deimos and Phobos, the four Galilean satellites of Jupiter, and 22 satellites of Saturn. Pole, rotation, and size information has been added for the asteroids (21) Lutetia, (511) Davida, and (2867) ?teins. Pole and rotation information has been added for (2) Pallas and (21) Lutetia. Pole and rotation and mean radius information has been added for (1) Ceres. Pole information has been updated for (4) Vesta. The high precision realization for the pole and rotation rate of the Moon is updated. Alternative orientation models for Mars, Jupiter, and Saturn are noted. The Working Group also reaffirms that once an observable feature at a defined longitude is chosen, a longitude definition origin should not change except under unusual circumstances. It is also noted that alternative coordinate systems may exist for various (e.g. dynamical) purposes, but specific cartographic coordinate system information continues to be recommended for each body. The Working Group elaborates on its purpose, and also announces its plans to occasionally provide limited updates to its recommendations via its website, in order to address community needs for some updates more often than every 3 years. Brief recommendations are also made to the general planetary community regarding the need for controlled products, and improved or consensus rotation models for Mars, Jupiter, and Saturn.     

Calibration and validation of the ocean color version-3 product from ADEOS OCTS

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.     

The δ13C–δ18O variations in marble in the Hida Belt,Japan

Marble has a great potential to understand a history of various geological events occurring during tectonic processes. In order to decode metamorphic–metasomatic records on C–O isotope compositions of marble at mid-crustal conditions, we conducted a C–O–Sr isotope study on upper amphibolite-facies marbles and a carbonate–silicate rock from the Hida Belt, which was once a part of the crustal basement of the East Asian continental margin. Carbon and oxygen isotope analyses of calcite from marbles (Kamioka area) and a carbonate–silicate rock (Wadagawa area) show a large variation of δ¹³C [VPDB] and δ¹⁸O [VSMOW] values (from −4.4 to +4.2 ‰ and +1.6 to +20.8 ‰, respectively). The low δ¹³C values of calcites from the carbonate–silicate rock (from −4.4 to −2.9 ‰) can be explained by decarbonation (CO₂ releasing) reactions; carbon–oxygen isotope modeling suggests that a decrease of δ¹³C strongly depends on the amount of silicate reacting with carbonates. The occurrence of metamorphic clinopyroxene in marbles indicates that all samples have been affected by decarbonation reactions. All δ¹⁸O values of calcites are remarkably lower than the marine-carbonate values. The large δ¹⁸O variation can be explained by the isotope exchange via interactions between marble, external fluids, and/or silicates. Remarkably low δ¹⁸O values of marbles that are lower than mantle value (~+5 ‰) suggest the interaction with meteoric water at a later stage. Sr isotope ratios (⁸⁷Sr/⁸⁶Sr = 0.707255–0.708220) might be close to their protolith values. One zircon associated with wollastonite in a marble thin-section yields a U–Pb age of 222 ± 3 Ma, which represents the timing of the recrystallization of marble, triggered by H₂O-rich fluid infiltration at a relatively high-temperature condition. Our isotope study implies that the upper amphibolite-facies condition, like the Hida Belt, might be appropriate to cause decarbonation reactions which can modify original isotope compositions of marble if carbonates react with silicates.     

Strong motion uncertainty determined from observed records by dense network in Japan

The variation of ground motions at specific stations from events in six narrow areas was inspected by using K-NET and KiK-net records. A source-area factor for individual observation stations was calculated by averaging ratios between observed values for horizontal peak acceleration and velocity, as well as acceleration response spectra for 5% damping, and predicted values using a ground-motion model (usually known as an attenuation relation) by Kanno et al. (Bull Seismol Soc Am, 96:879–897, 2006). Standard deviations between observed and predicted amplitudes after the correction factor are less than 0.2 on the logarithmic scale and decrease down to around 0.15 in the short-period range. Intra-event standard deviation clearly increases with decreasing distance due to differing paths around near source area. Standard deviations may increase with amplitude or decrease with magnitude; however, both amplitude and magnitude of the data are strongly correlated with distance. The standard deviation calculated in this study is obviously much smaller than that of the original ground-motion model, as epistemic uncertainties are minimized by grouping ground motions at specific stations. This result indicates that the accuracy of strong ground motion prediction could be improved if ground-motion models for specified region are determined individually. For this to be possible, it is necessary to have dense strong-motion networks in high-seismicity regions, such as K-NET and KiK-net.     

Liquid bridge contribution to shear behavior of unsaturated soil: modeling and application to a micromechanics model

Acta Geotechnica - Liquid bridges in unsaturated soils attach to grain contacts and contribute to strengthening microscopic bonding forces, which leads to macroscopic high strength and stiffness...     

Erratum to: Reports of the IAU Working Group on Cartographic Coordinates and Rotational Elements: 2006 & 2009

The primary poles for (243) Ida and (134340) Pluto and its satellite (134340) Pluto : I Charon were redefined in the IAU Working Group on Cartographic Coordinates and Rotational Elements (WGCCRE) 2006 report (Seidelmann et al. in Celest Mech Dyn Astr 98:155, 2007), and 2009 report (Archinal et al. in Celest Mech Dyn Astr 109:101, 2011), respectively, to be consistent with the primary poles of similar Solar System bodies. However, the WGCCRE failed to take into account the effect of the redefinition of the poles on the values of the rotation angle W at J2000.0. The revised relationships in Table 3 of Archinal et al. 2011) are $$\begin{array}{llll} W & = & 274^{\circ}.05 +1864^{\circ}.6280070\, d\;{\rm for\; (243)\,Ida} \\ W & = & 302^{\circ} .695 + 56^{\circ} .3625225\, d\;{\rm for\; (134340)\,Pluto,\; and}\\ W & = & 122^{\circ} .695 + 56^{\circ} .3625225\, d\;{\rm for\; (134340)\,Pluto : I \,Charon}\end{array}$$ where d is the time in TDB days from J2000.0 (JD2451545.0).     

Metaproteomic characterization of dissolved organic matter in coastal seawater

We performed a comprehensive metaproteomic analysis of the dissolved organic matter (DOM) in Japanese coastal waters using liquid chromatography–tandem mass spectrometry and demonstrated that these proteomes were characterized by proteins with various functions, including metabolic enzymes, membranes, and photosynthetic proteins. The protein sources included cyanobacteria, heterotrophic bacteria, and eukaryotic phytoplankton. Most of the components were similar among samples and also similar to pelagic components. We also observed differences in the compositions of the microbial communities of origin among the different dissolved protein samples and differences in the relative abundance of specific dissolved protein types (e.g., cytoskeletal proteins), possibly indicating potential dynamics in the coastal DOM pool.     

Transformation between surface spherical harmonic expansion of arbitrary high degree and order and double Fourier series on sphere

In order to accelerate the spherical harmonic synthesis and/or analysis of arbitrary function on the unit sphere, we developed a pair of procedures to transform between a truncated spherical harmonic expansion and the corresponding two-dimensional Fourier series. First, we obtained an analytic expression of the sine/cosine series coefficient of the \(4 \pi \) fully normalized associated Legendre function in terms of the rectangle values of the Wigner d function. Then, we elaborated the existing method to transform the coefficients of the surface spherical harmonic expansion to those of the double Fourier series so as to be capable with arbitrary high degree and order. Next, we created a new method to transform inversely a given double Fourier series to the corresponding surface spherical harmonic expansion. The key of the new method is a couple of new recurrence formulas to compute the inverse transformation coefficients: a decreasing-order, fixed-degree, and fixed-wavenumber three-term formula for general terms, and an increasing-degree-and-order and fixed-wavenumber two-term formula for diagonal terms. Meanwhile, the two seed values are analytically prepared. Both of the forward and inverse transformation procedures are confirmed to be sufficiently accurate and applicable to an extremely high degree/order/wavenumber as \(2^{30}\,{\approx }\,10^9\). The developed procedures will be useful not only in the synthesis and analysis of the spherical harmonic expansion of arbitrary high degree and order, but also in the evaluation of the derivatives and integrals of the spherical harmonic expansion.     

A method solving kepler's equation without transcendental function evaluations

We developed two approximations of the Newton-Raphson method. The one is a sort of discretization, namely to search an approximate solution on pre-specified grid points. The other is a Taylor series expansion. A combination of these was applied to solving Kepler's equation for the elliptic case. The resulting method requires no evaluation of transcendental functions. Numerical measurements showed that, in the case of Intel Pentium processor, the new method is three times as fast as the original Newton-Raphson method. Also it is more than 2.5 times as fast as Halley's method, Nijenhuis's method, and others.