On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.     

Quantitative distribution of late Cenozoic volcanic materials in Japan

The late Cenozoic orogeny in Japan is briefly reviewed. Amounts of volcanic materials in the three periods of the orogeny are estimated at: early Neogene 150 × 10³ km³ (mafic 40 %, salic 60 %), middle and late Neogene 20 × 10³ km³ (mafic 70 %, salic 30 %), Quaternary 5 × 10³ km³ (mafic 80 %, salic 20 %). The largest volume per unit time is in the early Neogene, and the smallest in the middle and late Neogene. Volume per unit area becomes larger towards the southeastern margin or «front» of the volcanic belt. Thermal energy transported by volcanic materials is compared with the terrestrial heat flow in the belt.     

Intra-oceanic island arc origin for Iratsu eclogites of the Sanbagawa belt,central Shikoku,southwest Japan

New geochemical and Sr–Nd isotopic data for the Iratsu eclogite and surrounding metamorphic rocks of the Sanbagawa belt, Japan, show that, while the protoliths of the metamorphic rocks formed in a variety of tectonic settings, the Iratsu body represents a deeply subducted and accreted island arc. The igneous protoliths of eclogites and garnet amphibolites were probably generated from a mantle source that had components of both a depleted mantle modified by slab-released fluid (as seen in a negative Nb anomaly) and an enriched mantle, similar to that of ocean island basalts (OIB). Fractional crystallization modeling indicates that the protoliths of some garnet clinopyroxenites from the Iratsu body are cumulates from a basaltic magma that crystallized under high O₂ and H₂O fugacities in the middle to lower crust. The source characteristics and crystallization conditions suggest that the protoliths of the Iratsu rocks formed in an oceanic island arc. Quartz eclogites from the marginal zone of the Iratsu body have geochemical signatures similar to turbidites from the Izu–Bonin island arc (as seen in a negative Nb anomaly and a concave REE pattern). The protoliths might be volcaniclastic turbidites that formed in a setting proximal to the oceanic island arc. Geochemical and isotopic signatures of the surrounding mafic schists are similar to normal (N-) and enriched (E-) mid-ocean-ridge basalt (MORB), and distinct from the rocks from the Iratsu body. The protoliths of the mafic schists likely formed in a plume-influenced mid-ocean ridge or back-arc basin. Pelitic schists from the surrounding rocks and pelitic gneisses from the marginal zone of the Iratsu body have evolved, continental geochemical signatures (as seen in a negative ε_Nd(t) value (~?5)), consistent with their origin as continent-derived trench-fill turbidites.     

Inclusion-trail geometry of albite porphyroblasts in a fold structure in the Sambagawa Belt, central Shikoku, Japan

The orientation of straight inclusion trails within albite porphyroblasts from basic schists has been measured around a north-closure fold, in the Besshi district of the Sambagawa Belt, central Shikoku, Japan. The porphyroblasts are aligned with their longest dimension parallel to both the subhorizontal, east–west-directed mineral lineation and to the fold axis. There is a systematic variation in inclusion-trail geometry between the upper (northern) and lower (southern) fold limbs. The shear sense deduced from quartz c-axis fabrics is top-to-the-west in the upper limb and top-to-the-east in the lower limb. Based on observed variations in porphyroblast inclusion trails, the structural history can be modelled as follows: (i) shear flow caused east–west stretching and folding of the metamorphic zonation; (ii) east–west ductile shear resulted in opposing senses of shear in the upper and lower limbs as the eclogite body situated in the core of the fold was extruded to the east.     

Lattice dynamics of corundum

The short-range force constants and the contribution of the potential energy to the elastic constants have been calculated from explicit expressions for the elastic constants and for the optical frequencies. The large elastic constants of corundum are attributable to the contribution of the large short-range stretching forces. The frequencies of the phonon spectrum and the contribution of the potential energy to the frequencies have also been calculated based on a rigid-ion and polarizable-ion model. The effective charge of an oxygen ion is found to be ?0.955e. The electronic polarizability of an aluminium and oxygen ion is found to be 0.05 and 1.36 ų, respectively.     

SHRIMP U–Pb zircon dating of quartz-bearing eclogite from the Sanbagawa Belt, south-west Japan: implications for metamorphic evolution of subducted protolith

In order to decipher the origin of eclogite in the high‐P/T Sanbagawa metamorphic belt, SHRIMP U–Pb ages of zircons from quartz‐bearing eclogite and associated quartz‐rich rock (metasandstone) were determined. One zircon core of the quartz‐rich rock yields an extremely old provenance age of 1899 ± 79 Ma, suggesting that the core is of detrital origin. Eight other core ages are in the 148–134 Ma range, and are older than the estimated age for trench sedimentation as indicated by the youngest radiolarian fossil age of 139–135 Ma from the Sanbagawa schists. Ages of metamorphic zircon rims (132–112 Ma) from the quartz‐rich rock are consistent with metamorphic zircon ages from the quartz‐bearing eclogite, indicating that eclogite facies metamorphism peaked at 120–110 Ma. These new data are consistent with both the Iratsu eclogite body and surrounding highest‐grade Sanbagawa schists undergoing coeval subduction‐zone metamorphism, and subsequent re‐equilibration under epidote amphibolite facies conditions during exhumation.     

A Late Cretaceous mammalian dentary from the Ashizawa Formation (Futaba Group), Fukushima,northeastern Japan

A mammalian dentary discovered in the Coniacian Ashizawa Formation (Fukushima, northeastern Japan) is described. The specimen is a fragment of the horizontal ramus of a left edentulous dentary with five alveoli, the distal four of which are plugged with broken roots. Based on the morphologies of the dentary and the roots, it is considered to be of a therian mammal. This constitutes the first discovery of a Mesozoic mammal in northeastern Japan and highlights the potential for future mammal discoveries in the Cretaceous System in northeastern Japan, which will be significant for disclosure of the mammalian faunal evolution in East Asia during the Late Cretaceous.     

Oblique and near collision subduction, Sagami and Suruga Troughs —preliminary results of the French-Japanese 1984 Kaiko cruise, Leg 2

Leg 2 of the French-Japanese 1984 Kaiko cruise has surveyed the Suruga and the Sagami Troughs, which lie on both sides of the northwestward moving and colliding Izu-Bonin Ridge, the northernmost part of the Philippine Sea plate. The transition from the Nankai Trough to the Suruga Trough is characterized by northward decrease in width of the accretionary prism, in good agreement with the increasing obliquity between the through axis and the direction of the convergence, as the strike of the convergent boundary changes from ENE-NNE to south-north. South of the area, the southern margin of the Zenisu Ridge shows contractional deformations. This supports the interpretation made by the team of Leg 1 who studied the western extension of the area we studied, that it is an intra-oceanic thrusting of the ridge over the Shikoku Basin. In the Sagami Trough, where the relative motion is highly oblique to the plate boundary, active subduction is mostly confined in the east-west trending portions of the trough located south of the Boso Peninsula and along the lower Boso Canyon, near the TTT triple junction. In between, the present motion is mainly right-lateral along the northwest trending Boso escarpment. However, an inactive but recent (Pliocene to lower Pleistocene) accretionary prism exists south of the Boso escarpment, which suggests that the relative motion was more northerly than at present before about 1 Ma ago.     

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.