抽油机悬点投影测量仪

油田抽油机的抽油杆幌动幅度过大，是引起抽油杆断裂的一个重要因素，检测这种幌动幅度是防止抽油杆断裂的一种有效手段。设计了一种基于面阵CCD和普通半导体激光器（LD）测量这种幌动的悬点投影测量方法，通过数字卷积滤波，达到了范围为0－40mm，误差＜0.2mm的技术检测指标。     

“BASS 300 PARACOM”: a “model” underwaterparametric communication system

Parametric transduction offers valuable advantages for underwater acoustic communications. Perhaps the most significant benefit is the fact that high directivity is achieved by means of a physically small transmit transducer. This feature may, ultimately, be employed to permit long-range, low-frequency communication using a compact source. The high directivity is desirable to combat multipath propagation and to achieve data communications in water which is shallow by comparison with range. A real-time, high data-rate “model” differential phase shift keying (DPSK) communication system has been constructed and demonstrated. This system uses parametric transduction, with a 300-kHz primary frequency and a 50-kHz secondary frequency. Experimental results show that the system can be employed to combat multipath propagation in shallow water and can achieve high data-rate text and color image transmission at 10 and 20 kb s^-1 for 2-DPSK and 4-DPSK, respectively, through a transmission bandwidth of 10 kHz. The “model” system was developed to confirm performance predictions for a future, operational long-range link employing a 50-kHz primary frequency and a 5-kHz secondary frequency     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

Magnetic stratigraphy observed in ferromanganese crust

Summary. A sample of ferromanganese crust deposit (SCHW-1D) was cut into two sets of 1 mm slices for palaeomagnetic study. Alternating field and thermal demagnetization, and isothermal remanent magnetization analyses were performed on each thin slice. The results reveal the presence of a stable magnetism and both normal and reversed polarity intervals in the specimens. The observed polarity intervals cannot be confidently correlated with the geomagnetic polarity time-scale of the last 10 Myr due to the polarity overlap inherent in the sampling technique. But the results confirm the slow accretion rate of ferromanganese deposit determined by ¹⁰Be method and suggest potential use of ferromanganese deposits in palaeomagnetic and tectonic studies.     

Tensile stresses around boreholes due to transient fluid flow

We present solutions for the effective stress induced by gas flow through a porous solid into a borehole resulting from sudden pressure reduction. Tensile effective stress that exceeds the strength of the solid will lead to borehole failure. This has applications to the intentional creation of cavities, relevant to the efficient recovery of coalbed methane, and the avoidance of borehole stability problems in conventional gas production.     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

High‐pressure metamorphism in Taiwan: from oceanic subduction to arc‐continent collision?

Abstract The Taiwan orogen has been the focus of a number of models of mountain building processes, but little attention has been paid to high‐pressure (HP) metamorphic rocks that are found as exotic blocks intermingled within the deepest units of the mountain belt. In this study, we re‐appraise from updated petrological and thermodynamic databases the physical conditions of HP metamorphism in Taiwan, and we combine our findings with available geochronological data to estimate the thermal history of these rocks. Our results indicate that peak metamorphic conditions of ～550 °C and 10–12 kbar have been followed by a rapid isothermal decompression, with exhumation possibly as rapid as burial. These units have subsequently been stored at a pressure of ～3 kbar for ～4–5 Myr, before their final exhumation, probably facilitated by the accretion of passive margin sequences during the Late Cenozoic collision. Therefore, HP units in Taiwan maintain a record of processes at depth from the early stages of oceanic subduction to the present arc‐continent collision.     

祁连山不同植被类型对积雪消融的影响

为研究祁连山植被对积雪消融的影响, 利用人工调查积雪深度逐日变化量和积雪盖度变化, 并结合空气雪面感热通量(SH)观测, 对祁连山水源林生态站排露沟流域海拔2 600～2 700 m青海云杉林、灌丛林、林缘、阳坡草地在2003-2007年的积雪消融进行了研究, 每年的观测从10月降雪开始到翌年5月积雪消融完结束, 共获取数据134 400个. 结果表明: 当SH<0时, 积雪消融停止;当SH>0时, 积雪消融开始;植被可以减缓积雪消融速率, 有植被的地方消融速率减慢, 反之则加快;不同植被消融速率大小顺序为草地>林缘>灌木林>乔木林;同一植被、不同坡向消融速率不同, 半阳坡云杉林＞半阴坡云杉林＞阴坡云杉林. 积雪含水率随气温升高而增大, 1月融化积雪占整个积雪的5%, 2月增大到28%, 大量积雪在3月消融, 占55%. 从坡位看, 下坡消融速率最大;在一个垂直带上, 低海拔消融速率大于高海拔. 温度是影响积雪消融的主要因子, 积雪消融速率随温度升高而增大, 反之则减小.     

浙江杭州地区中下奥陶统岩石地层研究

笔者以城市基岩地质填图和剖面研究资料为基础,选择临安市板桥乡南山上中下奥陶统剖面为候选层型,根据剖面的地层层序、岩性组合、分界标志,结合区域变质的总体特征,重新厘定、划分了4个组级岩石地层单位,并依据荆山岭与板桥剖面的地层、生物化石对比,确定其地层时代为早中奥陶世。这对重建杭州地区层型剖面与地质遗迹保护、岩石地层填图、奥陶纪石灰岩矿产资源的开发利用都具有重要意义。