Surface drag and turbulence over an inhomogeneous land surface

Data collected over an inhomogeneous semi-rural area are presented. The data are compared with previous surface-layer data to determine how representative the fixed-point flux measurements are of area averages. Departures from the standard surface-layer results are found to be relatively small (~10–20%), which supports the concept of a blending height above which the flow ceases to respond to variations in the underlying surface and becomes horizontally homogeneous.Effective roughness lengths are derived for different wind directions and the relationship between the effective roughness length and upwind surface is examined in the light of recent ideas on averaging surface roughness lengths. It is found that by averaging drag coefficients, realistic values of the effective roughness length can be calculated which are not very sensitive to the precise choice of the component roughness lengths.     

Modification of an acoustic pinger to transmit temperature data

An acoustic pinger can be modified to transmit two pings per second with the delay time between pings controlled by the temperature of an external thermistor. The precision of the temperature measurements is on the order of 0.1°C. This modification does not interfere with the normal depth indicating function of the pinger and is an inexpensive means of obtaining water temperature data.     

Modern swathe sounding and sub-bottom profiling technology for research applications: The Atlas Hydrosweep and Parasound Systems

This chapter describes two separate but complementary research echosounder systems originally developed by Krupp Atlas Elektronik GmbH for the new German oceanographic research vessel Meteor.The Hydrosweep is a Hydrographic wide-swathe sweep survey echosounder for both shallow and deep water applications providing accurate bathymetric surveys and terrain-following navigation capabilities.The Parasound system is a hull-mounted dual channel parametric narrow-beam deep sea survey and sub-bottom profiling echosounder enabling particularly high vertical and horizontal resolution of seabed features.     

Can turbidity caused by Corophium volutator (Pallas) activity be used to assess sediment toxicity rapidly?

The standard toxicity test organism, Corophium volutator, exhibits a behavioural response to contaminated sediments that causes increased turbidity of overlying water. We quantify the effects of this response to an estuarine sediment spiked with copper and hydrocarbon contaminated sediments from an oil installation in the North Sea. Turbidity measured 24 h after the start of a toxicity test shows a strong relationship with contaminant concentrations and with mortality after 10 days. Turbidity measurements can therefore give a rapid indication of sediment toxicity, permitting a reduction in storage time of sediments to be used in dilution series and toxicity identification evaluation (TIE) tests, reducing the likelihood of contaminants degrading prior to testing.     

Marine birds breeding in Penny Strait and Queens Channel, Nunavut, Canada

Surveys of breeding birds on small islands in Penny Strait and Queens Channel, Nunavut Territory, Canada, were conducted in July 2002 and 2003. Approximately 3600 marine birds were observed, with the most common species being Arctic terns ( Sterna paradisaea , N=2400) and common eiders ( Somateria mollissima borealis , N=620). We observed no Ross's gulls ( Rhodostethia rosed ) in either year, and we found ivory gulls ( Pagophila eburned ) only in 2003, even though these species commonly bred here in the 1970s. This previously unsurveyed region supports numerous breeding marine birds, but reproductive success on these small islands may be dependent on annual ice conditions and consequent movements of Arctic foxes ( Alopex lagopus ).     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

Effect of scallop shells and sediment grain size on phytoplankton flux to the bed

A flume study was made of bed skin friction and phytoplankton (Thalassiosira weissf ogii) deposition about a sea scallop (Placopecten magellanicus) mimic on a coarse (mean grain dia. =1200 μm), medium (615 μm) and fine (170 μm) quarry sand. Bed skin friction immediately upstream, and at one shell diameter downstream of the mimic was 1.2–2.4 times higher than ambient values (8.1 × 10⁻² Pa). Directly downstream of the mimic there was a region of near-zero skin friction. Bed diatom density was correlated with changes in skin friction; after 21 h, cell densities were 36–87% greater in the regions of high skin friction upstream and downstream of scallop than in control experiments. The pattern of bed diatom density about the scallop was similar in the coarse and medium sands, but deposition to the fine bed was not affected by the mimic. Diatom density was significantly correlated with grain diameter; deposition in the coarse bed was 2.3 times higher than in the medium sand, and 7.4 times higher than in the fine sand. A field experiment confirmed that the coarse sand was a greater sink of phytoplankton pigment than the fine sand. Previous studies and scaling arguments suggest that the differences in bed diatom density were controlled by the magnitude of interfacial solute fluxes. Regions of high skin friction about the mimic increased the porewater exchange, resulting in greater concentrations of diatoms retained within the bed. Similarly, the more permeable coarse sand would have a greater rate of porewater exchange than the fine sand, explaining the higher bed diatom density. Differences in the predicted volume of interstitial void space as a function of grain size closely matched the observed differences in bed diatom density. Results suggest that alteration of boundary layer flows by centimetre scale topography such as scallops, increases the flux of particulate organic matter toward the bed, but whether it is retained within the bed, and thus made available to the benthos is dependent on the sediment granularity.     

Estimated N2O and CO2 Emissions as Influenced by Agricultural Practices in Canada

The Denitrification-Decompostion (DNDC) model was used to estimate the impact of change in management practices on N₂O emissions in seven major soil regions in Canada, for the period 1970 to 2029. Conversion of cultivated land to permanent grassland would result in the greatest reduction in N₂O emissions, particularly in eastern Canada wherethe model estimated about 60% less N₂O emissions for thisconversion. About 33% less N₂O emissions were predicted for a changefrom conventional tillage to no-tillage in western Canada, however, a slight increase in N₂O emissions was predicted for eastern Canada. GreaterN₂O emissions in eastern Canada associated with the adoption of no-tillage were attributed to higher soil moisture causing denitrification, whereas the lower emissions in western Canada were attributed to less decomposition of soil organic matter in no-till versus conventional tilled soil. Elimination of summer fallow in a crop rotation resulted in a 9% decrease in N₂O emissions, with substantial emissions occurringduring the wetter fallow years when N had accumulated. Increasing N-fertilizer application rates by 50% increased average emissions by 32%,while a 50% decrease of N-fertilizer application decreased emissions by16%. In general, a small increase in N₂O emissions was predicted when N-fertilizer was applied in the fall rather than in the spring. Previous research on CO₂ emissions with the CENTURY model (Smith et al.,2001) allowed the quantification of the combined change in N₂O andCO₂ emissions in CO₂ equivalents for a wide range of managementpractices in the seven major soil regions in Canada. The management practices that have the greatest potential to reduce the combined N₂O andCO₂ emissions are conversion from conventional tillage to permanent grassland, reduced tillage, and reduction of summer fallow. The estimated net greenhouse gas (GHG) emission reduction when changing from cultivated land to permanent grassland ranged from 0.97 (Brown Chernozem) to 4.24 MgCO₂ equiv. ha^–1 y^–1 (BlackChernozem) for the seven soil regions examined. When changing from conventional tillage to no-tillage the net GHG emission reduction ranged from 0.33 (Brown Chernozem) to 0.80 Mg CO₂ equiv. ha^–1 y^–1 (Dark GrayLuvisol). Elimination of fallow in the crop rotation lead to an estimated net GHG emission reduction of 0.43 (Brown Chernozem) to 0.80 Mg CO₂ equiv.ha^–1 y^–1 (Dark Brown Chernozem). The addition of 50% more or 50% less N-fertilizer both resulted in slight increases in combined CO₂ and N₂O emissions. There was a tradeoff in GHG flux with greaterN₂O emissions and a comparable increase in carbon storage when 50% more N-fertilizer was added. The results from this work indicate that conversion of cultivated land to grassland, the conversion from conventional tillage to no-tillage, and the reduction of summerallow in crop rotations could substantially increase C sequestration and decrease net GHG emissions. Based on these results a simple scaling-up scenario to derive the possible impacts on Canada's Kyoto commitment has been calculated.     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.