Ar-Ar and I-Xe ages and thermal histories of three unusual metal-rich meteorites

Portales Valley, Sombrerete, and Northwest Africa (NWA) 176 are three unrelated meteorites, which consist of silicate mixed with substantial amounts of metal and which likely formed at elevated temperatures as a consequence of early impacts on their parent bodies. Measured ³⁹Ar-⁴⁰Ar ages of these meteorites are 4477 ± 11 Ma and 4458 ± 16 Ma (two samples of Portales Valley), 4541 ± 12 Ma, and 4524 ± 13 Ma, respectively (Ma = million years; all one-sigma errors). The Ar-Ar data for Portales Valley show no evidence of later open system behavior suggested by some other chronometers. Measured ¹²⁹I-¹²⁹Xe ages of these three meteorites are 4559.9 ± 0.5 Ma, 4561.9 ± 1.0 Ma, and ∼4544 Ma, respectively (relative to Shallowater = 4562.3 ± 0.4 Ma). From stepwise temperature release data, we determined the diffusion characteristics for Ar and Xe in our samples and calculated approximate closure temperatures for the K-Ar and I-Xe chronometers. Adopting results and interpretations about these meteorites from some previous workers, we evaluated all these data against various thermal cooling models. We conclude that Portales Valley formed 4560 Ma ago, cooled quickly to below the I-Xe closure temperature, then cooled deep within the parent body at a rate of ∼4 °C/Ma through K-Ar closure. We conclude that Sombrerete formed 4562 Ma ago and cooled relatively quickly. NWA 176 likely formed and cooled quickly ∼4544 Ma ago, or later than formation times of most meteorite parent bodies. For all three meteorites, the Ar-Ar ages are in better agreement with I-Xe ages and preferred thermal models if we increase these Ar-Ar ages by ∼20 Ma. Such age corrections would be consistent with probable errors in ⁴⁰K decay parameters in current use, as suggested by others. The role of impact heating and possible disruption and partial reassembly of meteorite parent bodies to form some meteorites likely was an important process in the early solar system.     

39Ar‐40Ar ages of eucrites and thermal history of asteroid 4 Vesta

Abstract— Eucrite meteorites are igneous rocks that derived from a large asteroid, probably 4 Vesta. Past studies have shown that after most eucrites formed, they underwent metamorphism in temperatures up to ≥800°C. Much later, many were brecciated and heated by large impacts into the parent body surface. The less common basaltic, unbrecciated eucrites also formed near the surface but, presumably, escaped later brecciation, while the cumulate eucrites formed at depths where metamorphism may have persisted for a considerable period. To further understand the complex HED parent body thermal history, we determined new ³⁹Ar‐⁴⁰Ar ages for 9 eucrites classified as basaltic but unbrecciated, 6 eucrites classified as cumulate, and several basaltic‐brecciated eucrites. Precise Ar‐Ar ages of 2 cumulate eucrites (Moama and EET 87520) and 4 unbrecciated eucrites give a tight cluster at 4.48 ± 0.02 Gyr (not including any uncertainties in the flux monitor age). Ar‐Ar ages of 6 additional unbrecciated eucrites are consistent with this age within their relatively larger age uncertainties. By contrast, available literature data on Pb‐Pb isochron ages of 4 cumulate eucrites and 1 unbrecciated eucrite vary over 4.4–4.515 Gyr, and ¹⁴⁷Sm‐¹⁴³Nd isochron ages of 4 cumulate and 3 unbrecciated eucrites vary over 4.41–4.55 Gyr. Similar Ar‐Ar ages for cumulate and unbrecciated eucrites imply that cumulate eucrites do not have a younger formation age than basaltic eucrites, as was previously proposed. We suggest that these cumulate and unbrecciated eucrites resided at a depth where parent body temperatures were sufficiently high to cause the K‐Ar and some other chronometers to remain as open diffusion systems. From the strong clustering of Ar‐Ar ages at ?4.48 Gyr, we propose that these meteorites were excavated from depth in a single large impact event ?4.48 Gyr ago, which quickly cooled the samples and started the K‐Ar chronometer. A large (?460 km) crater postulated to exist on Vesta may be the source of these eucrites and of many smaller asteroids thought to be spectrally or physically associated with Vesta. Some Pb‐Pb and Sm‐Nd ages of cumulate and unbrecciated eucrites are consistent with the Ar‐Ar age of 4.48 Gyr, and the few older Pb‐Pb and Sm‐Nd ages may reflect an isotopic closure before the large cratering event. One cumulate eucrite gives an Ar‐Ar age of 4.25 Gyr; 3 additional cumulate eucrites give Ar‐Ar ages of 3.4–3.7 Gyr; and 2 unbrecciated eucrites give Ar‐Ar ages of ?3.55 Gyr. We attribute these younger ages to a later impact heating. Furthermore, the Ar‐Ar impact‐reset ages of several brecciated eucrites and eucritic clasts in howardites fall within the range of 3.5–4.1 Gyr. Among these, Piplia Kalan, the first eucrite to show evidence for extinct ²⁶Al, was strongly impact heated ?3.5 Gyr ago. When these data are combined with eucrite Ar‐Ar ages in the literature, they confirm that several large impact heating events occurred on Vesta between ?4.1–3.4 Gyr ago. The onset of major impact heating may have occurred at similar times for both Vesta and the moon, but impact heating appears to have persisted for a somewhat later time on Vesta.     

Molecular simulation of humic substance-Ca-montmorillonite complexes

An understanding of the processes that lead to long-term stabilization of organic matter in soils is essential to the effective implementation of strategies designed to mitigate CO₂ loss from the soil carbon reservoir in temperate climatic zones. Decomposition studies indicate that montmorillonite, a smectite that often forms with interlayers rich in Ca²⁺, greatly retards the microbial mineralization of soil organic matter. We performed a series of atomistic simulations designed to identify favorable molecular-scale organo-mineral interactions within nanoscale, hydrated complexes consisting of a humic substance and Ca-montmorillonite. Both protonated and Ca-saturated forms of the model humic molecule, representing acidic and circumneutral solution conditions, respectively, were studied within the hydrated interlayer region of a rigid-atom model of Ca-montmorillonite. The protonated humic substance formed direct hydrophobic and hydrogen bonding (H-bonding) interactions with the clay mineral. A few polar organic groups adsorbed via water bridging interactions. The Ca-saturated humic substance adsorbed via numerous cation bridges, less numerous water bridges, and indirect H-bonding interactions mediated by water molecules. Application of molecular modeling techniques to this complex organo-mineral system thus allowed identification of interactions favorable to carbon sequestration under both acidic and circumneutral conditions.     

Examining Fluvial Stratigraphic Architecture Using Ground‐Penetrating Radar at the Fanta Stream Fossil and Archaeological Site,Central Ethiopia

The Fanta Stream site is an archaeological and paleontological locality in Addis Ababa, Ethiopia. The site contains a rich assemblage of fossil mammals and Acheulean artifacts of approximately 600 ka located in a rare high‐altitude context. A ground‐penetrating radar (GPR) survey was conducted in order to provide three‐dimensional imaging of the subsurface, which the authors use to interpret the geometry and distribution of fossil‐containing stratigraphic units. Utilizing the stream's natural cut bank exposure, we calibrate GPR data to known geologic units through radar facies analysis. Shallow, high‐amplitude coherent reflection geometries are attributed to volcanic tuff deposits, as these units exhibit subparallel continuous reflections consistent with planar stratified sedimentary deposition. Deeper, discontinuous reflection packages are interpreted as conglomeritic, fossil‐containing deposits. The results of the GPR survey outline the location of the Fanta Stream's paleodepositional features as well as suggest the extent of fossiliferous stratigraphic units for use in future excavations.     

Characterization of the manganese oxide produced by pseudomonas putida strain MnB1

Manganese oxides form typically in natural aqueous environments via Mn(II) oxidation catalyzed by microorganisms, primarily bacteria, but little is known about the structure of the incipient solid-phase products. The Mn oxide produced by a Pseudomonas species representative of soils and freshwaters was characterized as to composition, average Mn oxidation number, and N₂ specific surface area. Electron microscopy, X-ray diffraction, and X-ray absorption near edge structure spectroscopy were applied to complement the physicochemical data with morphological and structural information. A series of synthetic Mn oxides also was analyzed by the same methods to gain better comparative understanding of the structure of the biogenic oxide. The latter was found to be a poorly crystalline layer type Mn(IV) oxide with hexagonal symmetry, significant negative structural charge arising from cation vacancies, and a relatively small number of randomly stacked octahedral sheets per particle. Its properties were comparable to those of δ-MnO₂ (vernadite) and a poorly crystalline hexagonal birnessite (“acid birnessite”) synthesized by reduction of permanganate with HCl, but they were very different from those of crystalline triclinic birnessite. Overall, the structure and composition of the Mn oxide produced by P. putida were similar to what has been reported for other freshly precipitated Mn oxides in natural weathering environments, yielding further support to the predominance of biological oxidation as the pathway for Mn oxide formation. Despite variations in the degree of sheet stacking and Mn(III) content, all poorly crystalline oxides studied showed hexagonal symmetry. Thus, there is a need to distinguish layer type Mn oxides with structures similar to those of natural birnessites from the synthetic triclinic variety. We propose designating the unit cell symmetry as an addition to the current nomenclature for these minerals.     

SIMD correlator library for GNSS software receivers

Software receivers have had a discernable impact on the GNSS research community. Often such receivers are implemented in a compiled programming language, such as C or C++. A software receiver must emulate the digital signal processing (DSP) algorithms executed on dedicated hardware in a traditional receiver. The DSP algorithms, most notably correlation, have a high computational cost; this burden precludes many software receivers from running in real time. However, the computational cost can be lessened by utilizing single instruction multiple data (SIMD) operations found on modern ×86 processors. The following demonstrates how C/C++ compatible code can be written to directly utilize the SIMD instructions. First, an analysis is carried out to demonstrate why real time operation is not possible when using traditional C/C++ code is carried out. Secondly a tutorial outlines how to write and insert ×86 assembly, with SIMD operations, into C/C++ code. Performance gains achieved via SIMD operations are then demonstrated, and pseudo code outlines how SIMD operations can be employed to perform correlation. Finally, a C/C++ compatible SIMD enabled arithmetic library is added to the GPS Toolbox for use in software receivers.     

Apollo 12 ropy glasses revisited

Abstract— We analyzed ropy glasses from Apollo 12 soils 12032 and 12033 by a variety of techniques including SEM/EDX, electron microprobe analysis, INAA, and ³⁹Ar-⁴⁰Ar age dating. The ropy glasses have KREEP-like compositions different from those of local Apollo 12 mare soils; it is likely that the ropy glasses are of exotic origin. Mixing calculations indicate that the ropy glasses formed from a liquid enriched in KREEP and that the ropy glass liquid also contained a significant amount of mare material. The presence of solar Ar and a trace of regolith-derived glass within the ropy glasses are evidence that the ropy glasses contain a small regolith component Anorthosite and crystalline breccia (KREEP) clasts occur in some ropy glasses. We also found within these glasses clasts of felsite (fine-grained granitic fragments) very similar in texture and composition to the larger Apollo 12 felsites, which have a ³⁹Ar-⁴⁰Ar degassing age of 800 ± 15 Ma (Bogard et al, 1992). Measurements of ³⁹Ar-⁴⁰Ar in 12032 ropy glass indicate that it was degassed at the same time as the large felsite although the ropy glass was not completely degassed. The ropy glasses and felsites, therefore, probably came from the same source. Most early investigators suggested that the Apollo 12 ropy glasses were part of the ejecta deposited at the Apollo 12 site from the Copernicus impact Our new data reinforce this model. If these ropy glasses are from Copernicus, they provide new clues to the nature of the target material at the Copernicus she, a part of the Moon that has not been sampled directly.     

Textural variations and impact history of the Millbillillie eucrite

Abstract— We have investigated 10 new specimens of the Millbillillie eucrite to study its textures and mineral compositions by electron probe microanalyser and scanning electron microscope. Although originally described as having fine-grained texture, the new specimens show diversity of texture. The compositions (Mg/Fe ratios) of the host pigeonites and augite lamellae are homogeneous, respectively, in spite of the textural variation. In addition to their chemical homogeneity, pyroxenes in coarse and fine-grained clasts are partly inverted to orthopyroxene. Chemical zoning of plagioclase during crystal growth is preserved. This eucrite includes areas of granulitic breccias and impact melts. Large scale textures show a subparallel layering suggesting incomplete mixing and deposition of impact melt and lithic fragments. An ³⁹Ar-⁴⁰Ar age determination for a coarse-grained clast indicates a strong degassing event at 3.55 ± 0.02 Ga. We conclude that Millbillillie is among the most equilibrated eucrites produced by thermal annealing after impact brecciation. According to the classification of impact breccias, Millbillillie can be classified as a mixture of granulitic breccias and impact melts. The last significant thermal event is characterized by network-like glassy veins that run through clasts and matrices. Consideration of textural observations and requirements for Ar-degassing suggests that the ³⁹Ar-⁴⁰Ar age could in principle date either the earilier brecciation and annealing event or the event which produced the veins.     

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.