Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone,Ligurian Apennines,Italy

The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km.     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

Boundary manifolds for energy surfaces in celestial mechanics

We complete Mc Gehee's picture of introducing a boundary (total collision) manifold to each energy surface. This is done by constructing the missing components of its boundary as other submanifolds. representing now the asymptotic behavior at infinity.It is necessary to treat each caseh=0,h>0 orh<0 separately. In the first case, we repeat the known result that the behavior at total escape is the same as in total collision. In particular, we explain why the situation is radically different in theh>0 case compared with the zero energy case. In the caseh<0 we have many infinity manifold components. and the general situation is not quite well understood.Finally, our results forh0 are shown to be valid for general homogeneous potentials.Paper presented at the 1981 Oberwolfach Conference on Mathematical Methods in Celestial Mechanics.The research conducted in this paper has been partially supported by CONACYT (México), under grant PCCBNAL 790178.Partially supported by an Ajut a l'Investigacio of the University of Barcelona.     

Stratigraphic evolution of a fluvial–eolian succession: The example of the Upper Jurassic—Lower Cretaceous Guará and Botucatu formations, Paraná Basin, Southernmost Brazil

The Guará and Botucatu formations comprise an 80 to 120 m thick continental succession that crops out on the western portion of the Rio Grande do Sul State (Southernmost Brazil). The Guará Formation (Upper Jurassic) displays a well-defined facies shift along its outcrop belt. On its northern portion it is characterised by coarse-grained to conglomeratic sandstones with trough and planar cross-bedding, as well as low-angle lamination, which are interpreted to represent braided river deposits. Southwards these fluvial facies thin out and interfinger with fine- to medium-grained sandstones with large-scale cross-stratification and horizontal lamination, interpreted as eolian dune and eolian sand sheets deposits, respectively. The Botucatu Formation is characterised by large-scale cross-strata formed by successive climbing of eolian dunes, without interdune and/or fluvial accumulation (dry eolian system). The contact between the Guará and the Botucatu formations is delineated by a basin-wide deflation surface (supersurface). The abrupt change in the depositional conditions that took place across this supersurface suggests a major climate change, from semi-arid (Upper Jurassic) to hyper-arid (Lower Cretaceous) conditions. A rearrangement of the Paraná Basin depocenters is contemporaneous to this climate change, which seems to have changed from a more restrict accumulation area in the Guará Formation to a wider sedimentary context in the Botucatu Formation.     

Projecting land-use change processes in the Sierra Norte of Oaxaca, Mexico

The objective of study was to explore short-term trends of processes that determine land-use change in Sierra Norte of Oaxaca (SNO), Mexico. Land use and land cover changes (LULCC) were estimated in a complex mosaic of vegetation in the SNO from 1980 to 2000, and projected them to 2020 through a Markovian model. SNO is highly vulnerable to climatic change according to a 2050 GCM scenario. However, 3% annual rate of tropical and temperate forest deforestation from agriculture and livestock encroachment, suggest the threat from land-use change is higher than that from climatic change for this study site. Productive land-use strategies are needed to reduce such high deforestation rates for tropical regions. Controlling deforestation would also reduce short-term effects of CO₂ emissions to the atmosphere. Because of the necessity to evaluate anthropogenic ecosystem changes, it is imperative to separate short-term influences such as deforestation, from long-term influences such as climatic change.     

Decoupled seismic analysis of an earth dam

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.     

Population of the Scattered Kuiper Belt

We study how the internal structure of dark halos is affected if cold dark matter particles are assumed to have a large cross section for elastic collisions. We identify a cluster halo in a large cosmological N-body simulation and resimulate its formation with progressively increasing resolution. We compare the structure found in the two cases in which dark matter is treated as collisionless or as a fluid. For the collisionless case, the overall ellipticity of the cluster, the central density cusp, and the amount of surviving substructure are all similar to those found in earlier high-resolution simulations. Collisional dark matter results in a cluster that is more nearly spherical at all radii, has a steeper central density cusp, and has less-but still substantial-surviving substructure. As in the collisionless case, these results for a "fluid" cluster halo are expected to carry over approximately to smaller mass systems. The observed rotation curves of dwarf galaxies then argue that self-interacting dark matter can only be viable if intermediate cross sections produce structure that does not lie between the extremes we have simulated.     

Wavefield Migration plus Monte Carlo Imaging of 3D Prestack Seismic Data

Prestack wave‐equation migration has proved to be a very accurate shot‐by‐shot imaging tool. However, 3D imaging with this technique of a large field acquisition, especially one with hundreds of thousands of shots, is prohibitively costly. Simply adapting the technique to migrate many superposed shot‐gathers simultaneously would render 3D wavefield prestack migration cost‐effective but it introduces uncontrolled non‐physical interference among the shot‐gathers, making the final image useless. However, it has been observed that multishot signal interference can be kept under some control by averaging over many such images, if each multishot migration is modified by a random phase encoding of the frequency spectra of the seismic traces. In this article, we analyse this technique, giving a theoretical basis for its observed behaviour: that the error of the image produced by averaging over M phase encoded migrations decreases as M^?1 . Furthermore, we expand the technique and define a general class of Monte‐Carlo encoding methods for which the noise variance of the average imaging condition decreases as M^?1 ; these methods thus all converge asymptotically to the correct reflectivity map, without generating prohibitive costs. The theoretical asymptotic behaviour is illustrated for three such methods on a 2D test case. Numerical verification in 3D is then presented for one such method implemented with a 3D PSPI extrapolation kernel for two test cases: the SEG–EAGE salt model and a real test constructed from field data.