Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Refraction-Diffraction Mathematical Model for Waves With Lateral Energy Transmission Mechanism and Its Verification

To solve problems concerning wave elements and wave propagation, an effective way is the wave energy balance equation, which is widely applied in oceanography and ocean dynamics for its simple computation. The present papaer advances wave energy balance equations considering lateral energy transmission and energy loss as the governing equation for the study of wave refraction-diffraction. For the mathematical model, numerical simulation is made by means of difference method, and the result is verified with two examples.     

Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

现代抗震设计理论的发展过程

介绍了现代抗震设计理论的发展过程，基于性态的抗震设计理论的提出背景、发展情况及研究内容；详细介绍了基于性态的抗震设计理论的抗震设防方法；指出了基于性态的抗震设计理论与传统抗震设计理论的主要区别及特点。     

钻孔灌注桩常见现场事故的分析与防治

论述了钻孔灌注桩常见现场事故的预防，分析和治理等方面的几个问题，叙述了钢筋笼上浮，导管堵塞，钢筋笼掉入孔内，导管提出混凝土面，掉钻头，串孔等事故的原因和处理方法及预防措施。     

A coherency function model of ground motion at base rock corresponding to strike-slip fault

IntroductionEarthquakedamagesurveyandresearchresultshavedemonstratedthatspatialdistributiondifferenceofgroundmotionisoneoftheimportantreasonswhichcausedlongstructure(eglongspanbridge,undergroundpipe)destroy.Thathowtoprovideareasonableinputofgroundmotionfieldforaseismicdesignoflongstructureisaurgentprobleminearthquakeengineeringfield.Atpresent,themethodtostudyspatialvariationofgroundmotionsisadoptingstatisticanalysisbasedondensearrayrecordssuchasSMART-1array,etc,togetcoherencyfunctionofground…     

风沙流中沙粒浓度分布的实验研究

利用粒子图像测速技术（PIV）,在风洞内对与天然沙接近的石英沙风沙流沙颗粒浓度沿高度分布进行了研究。对 3种不同轴线风速研究结果表明,风沙流中沙粒浓度沿水平方向基本不变,而随高度呈指数衰减,而且其衰减速率与风速密切相关。风速越大,衰减速率越慢;风速越小,衰减速率越快。风沙运动一旦发生时,靠近沙床表面的沙粒浓度随风速变化很小,可以认为趋于稳定,达到最大值。     

多硅白云母压力计在退变质作用中的稳定性探讨

探讨多硅白云母地质压力计在低温退变质过程中的稳定性，在对大别山东缘和苏鲁造山带西缘郯庐左旋走滑韧性剪切带糜棱岩中的多硅白云母残斑由中心向两侧边缘进行电子探针分析后发现：由中心向两侧边缘Si减少,Al增加,Fe，Mg略有降低，部分样品中K，Na有不同程度的增加．而Ti则显示不活动富集。这是由于退变质过程中流体的活动常会改变残斑白云母的成分．并且在流体活动过程相对短暂的情况下，使残斑白云母的成分不能发生充分变化．最终会导致白云母不同部位具有不同的成分。因而,经历了富流体活动的退变质作用后,岩石中的多硅白云母残斑已不能完全保存其形成时的压力信息。     

晋城煤层气藏成藏机制

通过晋城煤层气的规模开发、压裂煤层气井的解剖、井下煤层瓦斯抽放、构造地应力场研究、煤储层大裂隙系统“CT”式解剖与煤层气封闭保存条件研究, 发现3#煤储层内部存在大量煤层气包, 构造微破裂作用促使煤层气包之间广泛合并联通, 煤层气包内部储层的非均质性弱化, 渗透率增加, 煤层气包内部的游离气体比例增加, 流体压力系统边界逐渐清晰并形成煤层气藏. 揭示煤层气藏的成藏机制, 认识煤层气藏的内部细节特征, 促进了该区的煤层气开发技术进步, 提高了井下煤层瓦斯的抽放效率.