The 1786 earthquake-triggered landslide dam and subsequent dam-break flood on the Dadu River, southwestern China — Reply

A short reply to discussion by Chanson.     

Influence of water level fluctuation on the spatial dynamic of the water chemistry at Lake Fertõ/Neusiedler See

Lake Fertõ/Neusiedler See is a steppe lake situated on the Hungarian-Austrian border with a surface area of 309 km². It is an extremely shallow lake with regulated outflow. 54% of the whole lake and 85% of the Hungarian part (75 km²) is covered by reed. There are numerous reedless areas (inner ponds) of variable size within the reed belt, which is enmeshed with canals connecting the inner ponds with the open water areas. Fundamental differences were recorded in the water chemistry of the three water type areas, open water, canals and inner ponds. The degree of these differences is basically determined by the distance from the open water areas and the water level of the actual years. An extremely high, an average and an extremely low water level year was examined, in order to present the spatial and temporal differences in the water chemistry of the investigated water bodies. Differences due to the water level fluctuation between years in the three different water types are discussed on the basis of electrical conductivity, cation, and anion concentration changes of the water. Our results support the concept of high instability of Lake Fertõ and describe habitats with remarkable temporal and spatial variability. The high influence of water level on habitat conditions at different sites of the lake recommend a carefull water level regulation strategy.     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Accessing effects and signals of leakage from a CO<Subscript>2</Subscript> reservoir to a shallow freshwater aquifer by reactive transport modelling

CO₂ geological storage is a transitional technology for the mitigation of climate change. In the vicinity of potential CO₂ reservoirs in Hungary, protected freshwater aquifers used for drinking water supplies exist. Effects of disaster events of CO₂ escape and brine displacement to one of these aquifers have been studied by kinetic 1D reactive transport modelling in PHREEQC. Besides verifying that ion concentrations in the freshwater may increase up to drinking water limit values in both scenarios (CO₂ or brine leakage), total porosity of the rock is estimated. Pore volume is expected to increase at the entry point of CO₂ and to decrease at further distances, whereas it shows minor increase along the flow path for the effect of brine inflow. Additionally, electrical conductivity of water is estimated and suggested to be the best parameter to measure for cost-effective monitoring of both worst-case leakage scenarios.     

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.     

大型现场室内两用直剪仪研制（Ⅱ）：试验测试

利用新近研制的大型现场室内两用直剪仪，对两种不同性质的砂样进行了剪切试验。在对干砂的直接剪切试验特性进行综述的基础上，从多方面对该大型直剪仪得出的干砂剪切试验数据进行了分析验证，结果表明该大型直剪仪得出的试验数据一致性好、可靠性较高，说明该大型直剪仪的基本剪切性能稳定，可进一步应用于相关岩土材料的试验研究。     

Displacement‐controlled method and its applications to material non‐linearity

For the analysis of non‐linear problems, the displacement‐controlled method (DCM) has a more extensive application scope and more powerful abilities than the load‐controlled method (LCM). However, difficulties of the DCM's procedure not amenable to most finite element implementations of the conventional LCM have restricted its applications in geomechanics. By means of Sherman–Morrison's theorem, the solution of DCM is improved. The improved procedure is characterized by high efficiency, good numerical stability and a programme structure similar to LCM. Two aspects of applications of DCM are illustrated. The first application is to compute the response of a structure under a given load level like the conventional finite element analysis. The second application is to trace the equilibrium path of a structure under a given load distribution type. A simple but effective algorithm is presented for automatically adjusting the step length in tracing the equilibrium path. Examples illustrate that the proposed procedures are suited for modelling complicated non‐linear problems in geomechanics. Copyright © 2005 John Wiley & Sons, Ltd.     

Characterization of Galena and Vein Paragenesis in the Penjom Gold Mine, Malaysia: Trace Elements, Lead Isotope Study and Relationship to Gold Mineralization Episodes

The Penjom Gold Mine is located 30 km from the Bentong-Raub Suture at the western boundary of the Central Belt in Peninsular Malaysia. Gold mineralization hosted within the vein system is associated with pyrite, arsenopyrite, and minor base metals including galena. Trace element and lead isotope analysis was undertaken on nine samples that represent two stages of galena formed during two tectonic events. Both the Pb isotopes and the trace elements show that the first stage galena within the mineralized areas at the footwall has different geochemical characteristics compared with galena in non mineralized areas in the hanging wall, suggesting that galena crystallized from two different ore fluids and probably at two different times. Higher Te, Se and Bi in the galena from the mineralized area may indicate hydrothermal fluids that migrate through the structural conduit and leached out the metal along the pathway that consist of dominant carbonaceous unit. The Pb isotopic ratio composition are transitional between the bulk crustal growth and an upper crustal growth curve, indicating that derivation was from arc rocks associated with continental crust or a crustal source that includes arc volcanic and old continental sedimentary rocks.     

Numerical modelling of soil nails in loose fill slope under surcharge loading

A plane–strain numerical model has been developed to mimic a nailed loose fill slope under surcharge loading. The model has been used to back-analyse a field test that was conducted to examine the behaviour of soil nails in loose fill slopes under surcharge loading. Incremental elasto-plastic analyses coupled with pore water diffusion have been performed to study the internal deformation, water content redistribution in the soil, and the performance of the soil nails during and after the application of surcharge loading. The model parameters describing the mechanical and hydraulic properties of the nailed slope were obtained from field or laboratory tests. Different modelling techniques and boundary conditions for mimicking soil–nail interaction in loose fill material have been examined. Comparisons between numerical predictions and field measurements demonstrate that a new interfacial model, denoted as the embedded bond–slip interface model, is more suitable for mimicking the interfacial behaviour. Despite the simplicity of the numerical model, the predicted responses are in close agreement with the field test results, in particular the mobilisation and distribution of nail forces in response to surcharge loading. Both the numerical and the field test results suggest that soil nails are capable of increasing the overall stability of a loose fill slope for the loading conditions considered in this study. The increase in confining stress along the soil nails near the surcharge area is central to the overall stabilising mechanism. On the contrary, the nail forces mobilised near the nail heads are much smaller, indicating that the beneficial effect of having a structural grillage system at the slope face is limited for the range of surcharge pressures considered in this study.     

充分发挥岩土力学数值分析与解析方法的效能——第三届全国岩土力学数值分析与解析方法讨论会论文选登

岩土力学是力学学科的一个重要分支,也是一门应用性很强的工程学科。岩土介质作为一种地质材料,因不同的形成历史与条件,除物质组成不同外,还具有不同的微观、细观和宏观结构,这就使岩土介质与其他固体材料有着重大的差别。