Frequency distributions and correlations of solar X-ray flare parameters

We have determined frequency distributions of flare parameters from over 12000 solar flares recorded with the Hard X-Ray Burst Spectrometer (HXRBS) on the Solar Maximum Mission (SMM) satellite. These parameters include the flare duration, the peak counting rate, the peak hard X-ray flux, the total energy in electrons, and the peak energy flux in electrons (the latter two computed assuming a thick-target flare model). The energies were computed above a threshold energy between 25 and 50 keV. All of the distributions can be represented by power laws above the HXRBS sensitivity threshold. Correlations among these parameters are determined from linear regression fits as well as from the slopes of the frequency distributions. Variations of the frequency distributions were investigated with respect to the solar activity cycle.Theoretical models for the frequency distribution of flare parameters depend on the probability of flaring and the temporal evolution of the flare energy build-up. Our results are consistent with stochastic flaring and exponential energy build-up, with an average build-up time constant that is 0.5 times the mean time between flares. The measured distributions of flares are also consistent with predicted distributions of flares from computer simulations of avalanche models that are governed by the principle of self-organized criticality.     

Observation of chromospheric evaporation during the solar maximum mission

A sample of flares detected in 1980 with the Bent Crystal Spectrometer and the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission satellite has been analysed to study the upward motions of part of the soft X-ray emitting plasma. These motions are inferred from the presence of secondary blue-shifted lines in the Ca XIX and Fe XXV spectral regions during the impulsive phase of disk flares. Limb flares do not show such blue-shifted lines indicating that the direction of the plasma motion is mainly radial and outward. The temporal association of these upward motions with the rise of the thermal phase and with the impulsive hard X-ray burst, as well as considerations of the plasma energetics, favour the interpretation of this phenomenon in terms of chromospheric evaporation. The two measureable parameters of the evaporating plasma, emission measure and velocity, depend on parameters related to the energy deposition and to the thermal phase. The evaporation velocity is found to be correlated with the spectral index of the hard X-ray flux and with the rise time of the thermal emission measure of the coronal plasma. The emission measure of the rising plasma is found to be correlated with the total energy deposited by the fast electrons in the chromosphere by collisions during the impulsive phase and with the maximum emission measure of the coronal plasma.     

Methyl halide production and loss rates in sea water from field incubation experiments

Experiments were conducted in the field to determine the non-chemical loss rate of methyl iodide in seawater and to examine production rates of methyl halides. The loss rate of added C13 labelled methyl iodide, present at concentrations similar to those found in seawater, corrected for chemical loss due to reaction with Cl⁻ varied from < 1 to 18% day^− 1, with a mean value of 7%. This rate of loss is much lower than that which was proposed by Bell et al. [Bell, N., Hsu, L., Jacob, D. J., Schultz, M. G., Blake, D. R., Butler, J. H., King, D. B., Lobert, J. M., Maier-Reimer, E., 2002. Methyl iodide: Atmospheric budget and use as a tracer of marine convection in global models, Journal of Geophysical Research-Atmospheres 107(D17), 4340-4351.] to account for the large discrepancies between observed and predicted mid-latitude concentrations of CH₃I based on their global photochemical source model. The suitability of several types of container for seawater incubations was studied and only quartz tubes appeared to be free of experimental artifact. Collapsible polyvinyl fluoride containers showed major production of methyl halides on irradiation with simulated sunlight. Polyethylene containers caused spurious production of methyl iodide at lower rates.     

Effects of polynuclear aromatic hydrocarbons on lysosomal membranes in molluscs

Lysosomal sequestration of polynuclear aromatic hydrocarbons (PNAHs), a major class of environmental contaminant, is a well-established phenomenon;¹ considerably less is known about their pathological effects on lysosomes. Marine molluscs contain a number of lysosome-rich tissues and PNAHs are known to induce deleterious alterations in lysosomal structure and latency of lysosomal enzymes.² The latter are presumed to involve destabilisation of the lysosomal membrane, resulting in increased permeability and reduced enzyme latency. If lysosomal injury involves derangement of membrane-lipid structure due to the interaction of PNAHs then it would be expected that membrane damage would be closely linked to the structural characteristics of the intruding molecule. Our results show that the effects of the isomeric PNAHs phenanthrene and anthracene on digestive cell lysosomal stability were markedly different in the marine mussel (Mytilus edulis) over the same range of tissue concentrations. Lysosomal membrane stability was determined using a cytochemical test for enzyme latency.³     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---

     

Decimetric type III radio bursts and associated hard X-ray spikes

A detailed comparison is made between hard X-ray spikes and decimetric type III radio bursts for a relatively weak solar flare on 1981 August 6 at 10: 32 UT. The hard X-ray observations were made at energies above 30 keV with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission and with a balloon-born coarse-imaging spectrometer from Frascati, Italy. The radio data were obtained in the frequency range from 100 to 1000 MHz with the analog and digital instruments from Zürich, Switzerland. All the data sets have a time resolution of 0.1 s or better. The dynamic radio spectrum shows many fast drift type III radio bursts with both normal and reverse slope, while the X-ray time profile contains many well resolved short spikes with durations of 1 s. Some of the X-ray spikes appear to be associated in time with reverse-slop bursts suggesting either that the electron beams producing the radio bursts contain two or three orders of magnitude more fast electrons than has previously been assumed or that the electron beams can trigger or occur in coincidence with the acceleration of additional electrons. One case is presented in which a normal slope radio burst at 600 MHz occurs in coincidence with the peak of an X-ray spike to within 0.1 s. If the coincidence is not merely accidental and if it is meaningful to compare peak times, then the short delay would indicate that the radio signal was at the harmonic and that the electrons producing the radio burst were accelerated at an altitude of 4 × 10⁹ cm. Such a short delay is inconsistent with models invoking cross-field drifts to produce the electron beams that generate type III bursts but it supports the model incorporating a MASER proposed by Sprangle and Vlahos (1983).     

Water ice polymorphs and their significance on planetary surfaces

Impacts into an icy surface could produce significant amounts of high pressure forms of water ice. Due to the relatively low ambient surface temperatures on satellites in the outer solar system and the modest temperature rises accompanying the impact pressures required for water ice metamorphism, high-pressure polymorphs will be created by and may remain after large cratering events. If so, those high-pressure ices should be ubiquitous. Low-pressure cubic ice may be abundant as well. Impacts into an icy regolith may both produce high-pressure polymorphs from ice I and destroy high-pressure polymorphs already present. The result will be an (unknown) equilibrium concentration of high pressure polymorphs in the regolith. Polymorphs may be detectable and mappable by reflection spectroscopy at vacuum ultraviolet and mid-infrared wavelengths.     

Unusual coronal activity following the flare of 6 November 1980

For almost 30 hr after the major (gamma-ray) two-ribbon flare on 6 November 1980, 03:30 UT, the Hard X-Ray Imaging Spectrometer (HXIS) aboard the SMM satellite imaged in > 3.5 keV X-rays a gigantic arch extending above the active region over the limb. Like a similar configuration on 22 May 1980, this arch formed the lowest part of a stationary post-flare radio noise storm recorded at metric wavelengths at Nançay and Culgoora. 6.5 hr after the flare a coronal region below the arch started quasi-periodic pulsations in X-ray brightness, observed by several SMM instruments. These brightness variations had no response in the chromosphere (H), very little in the transition layer (O v), but they clearly correlated with similar variations in brightness at 169 MHz. There were 13 pulses of this kind, with apparent periodicity of about 20 min, until another flare occurred in the active region at 15:00 UT. All the brightenings appeared within a localized area of about 30000 km² in the northern part of the active region, but they definitely did not occur all at the same place.The top of the X-ray arch, at an altitude of 155 000 km, was continuously and smoothly decaying, taking no part in the striking variations below it. Therefore, the area variable in brightness does not seem to be the footpoint of the arch, as we supposed for similar variations on 22 May. More likely, it is a separate region connected directly with the source of the radio storm; particles accelerated in the storm may be dumped into the low corona and cause the X-ray enhancements. The X-ray arch was enhanced by two orders of magnitude in 3.5–5.5 keV X-ray counts and the temperature increased from 7.3 × 10⁶ to 9 × 10⁶ K when the new two-ribbon flare occurred at 15:00 UT. Thus, it is possible that energy is brought into the arch via the upper parts of the reconnecting flare loops - a process that can continue for hours.     

The formation of saturn's satellites and rings,as influenced by saturn's contraction history

We have used Pollack et al.'s 1976 calculations of the quasi-equilibrium contraction of Saturn to study the influence of the planet's early high luminosity on the formation of its satellites and rings. Assuming that the condensation of ices ceased at the same time within Jupiter's and Saturn's primordial nebulae, and using limits for the time of cessation derived for Jupiter's system by Pollack and Reynolds (1974) and Cameron and Pollack (1975), we arrive at the following tentative conclusions. Titan is the innermost satellite at whose position a methane-containing ice could condense, a result consistent with the presence of methane in this satellite's atmosphere. Water ice may have been able to condense at the position of all the satellites, a result consistent with the occurrence of low-density satellites close to Saturn. The systematic decrease in the mass of Saturn's regular satellites with decreasing distance from Saturn may have been caused partially by the larger time intervals for the closer satellites between the start of contraction and the first condensation of ices at their positions and between the start of contraction and the time at which Saturn's radius became less than a satellite's orbital radius. Ammonia ices, principally NH₄SH, were able to condense at the positions of all but the innermost satellites.Water ice may bave been able to condense in the region of the rings close to the end of the condensation period. We speculate that the rings are unique to Saturn because on the one hand, temperatures within Jupiter's Roche limit never became cool enough for ice particles to form before the end of the condensation period and on the other hand, ice particles formed only very early within Uranus' and Neptune's Roche limits, and were eliminated by gas drag effects that caused them to spiral into the planet before the gas of these planets' nebula was eliminated. Gas drag would also have eliminated any rocky particles initially present inside the Roche limit.We also derive an independent estimate of several million years for the time between the start of the quasi-equilibrium contraction of Saturn and the cessation of condensation. This estimate is based on the density and mass characteristics of Saturn's satellites. Using this value rather than the one found for Jupiter's satellites, we find that the above conclusions about the rings and the condensation of methane-and ammonia-containing ices remain valid.