Comparative tolerance of two estuarine annelids to fluoranthene under normoxic and moderately hypoxic conditions

The tolerance of the oligochaete Monopylephorus rubroniveus and the polychaete Streblospio benedicti to sediment-associated fluoranthene was characterized under normoxic (>80% dissolved oxygen saturation) and moderately hypoxic ( approximately 50% dissolved oxygen saturation) conditions. Under both conditions, M. rubroniveus was highly tolerant of fluoranthene. Streblospio benedicti was considerably less tolerant of fluoranthene compared with M. rubroniveus. In addition, S. benedicti was less tolerant to fluoranthene under moderately hypoxic conditions, although no differences in sensitivity between the two oxygen conditions were observed based upon median lethal tissue residues. Bioaccumulation factors were higher for S. benedicti exposed to moderate hypoxia, suggesting that behavioral adaptations to compensate for the lower dissolved oxygen increased its bioaccumulation of fluoranthene. The results of the present laboratory study demonstrate that (1). changes in annelid tolerance to fluoranthene under varying oxygen conditions is a species-dependent phenomenon and (2). the differential tolerance of these two annelids to these combined stressors is consistent with their relative abundances in the field.     

Responses of a Mediterranean soft bottom community to short-term (1993-1996) hydrological changes in the Rhone river

The polychaete fauna of muddy bottoms off the Rhone delta (NW Mediterranean) was seasonally sampled at two sites at 70 m depth, from 1993 to 1996. During this period, five severe flood events occurred. A clustering analysis (distance coefficient of Whittaker) and three way fixed factor ANOVAs (site x season x year) showed strong year-to-year changes in species density and community structure, changes that masked seasonal variations. Total density increased by a factor of 3 and density of most species significantly increased following the first flooding event. Changes in the community structure were due to the successive dominance of a few species. The opportunistic species, such as Cossura sp., Mediomastus sp. and Polycirrus sp., exhibited peaks in density 1-3 months after the flood. These peaks were followed by a drastic decline. For species with a long life span, such as Sternaspis scutata, a slower but continuous increase in density was observed which was maintained for several months. The density fluctuations of these species exhibited a good correlation with river flow with time lags of 1-2 years. The successional dynamics observed are explained according to the geographical origin of the floods and the biology and feeding ecology of species.     

Multiple stressors in an estuarine system: Effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respiration

The effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respriation were studied in the Paxtuxent River estuary near St. Leonard, Maryland. Experiments were conducted over three years (1995–1997) in mesocosms containing riverine sediment and water. The experimental design was 2×2×3 factorial with two levels of nutrients (ambient and + nutrients), two of trace elements (ambient and + trace elements) and three of trophic complexity (plankton, plankton + fish, and plankton + fish + benthos). Trace elements included arsenic (As), copper (Cu), and cadmium (Cd). The experiment was conducted three times in 1995 and 1997 and four times in 1996. In 1995 and 1996, sediments were muddy, while in the final year sediments were sandy. In mesocoms with sandy sediments, nutrient additions increased benthic photosynthesis overall, while trace element additions increased benthic photosynthesis in two of three experimental runs. Benthic photosynthesis in these mesocosms appeared to be related to nitrogen loading. Benthic respiration increased in nutrient and trace element amended mesocosms with sandy sediments, apparently in response to higher benthic photosynthesis. Increasing trophic complexity, particularly the presence of benthic organisms, also increased benthic respiration in mesocosms with sandy sediments. There were no effects of nutrient or trace element additions on benthic photosynthesis and respiration when the sediments were muddy. The lack of consistent responses to nutrient additions was surprising given that benthic respiration rates (and presumably nutrient regeneration) were similar in all three years, regardless of sediment type. Muddy, sediments did not mask, the effects of nutrient addition by supplying more nutrients to benthic microalgae than sandy sediments. In 1996, the presence of filter feeding bivalves increased the relative heterotrophy of sediments, measured as production: respiration. Consistent with increased heterotrophy, effluxes of ammonium and soluble reactive phosphorus from sediments were greater in mesocosms containing benthic organisms. Anthropogenically-induced changes in estuaries, such as loading of nutrients and trace elements or reduced trophic complexity, can have important effects on benthic processes and potentially pelagic processes through feedback mechanisms.     

Fluid flow and pore pressure development throughout the evolution of a trough mouth fan,western Barents Sea

Using a combination of geophysical and geotechnical data from Storfjorden Trough Mouth Fan off southern Svalbard, we investigate the hydrogeology of the continental margin and how this is affected by Quaternary glacial advances and retreats over the continental shelf. The geotechnical results show that plumites, deposited during the deglaciation, have high porosities, permeabilities and compressibilities with respect to glacigenic debris flows and tills. These results together with margin stratigraphic models obtained from seismic reflection data were used as input for numerical finite element models to understand focusing of interstitial fluids on glaciated continental margins. The modelled evolution of the Storfjorden TMF shows that tills formed on the shelf following the onset of glacial sedimentation (ca. 1.5 Ma) acted as aquitards and therefore played a significant role in decreasing the vertical fluid flow towards the sea floor and diverting it towards the slope. The model shows that high overpressure ratios (up to λ ca. 0.6) developed below the shelf edge and on the middle slope. A more detailed model for the last 220 kyrs accounting for ice loading during glacial maxima shows that the formation of these aquitards on the shelf focused fluid flow towards the most permeable plumite sediments on the slope. The less permeable glacigenic debris flows that were deposited during glacial maxima on the slope hinder fluid evacuation from plumites allowing high overpressure ratios (up to λ ca. 0.7) to develop in the shallowest plumite layers. These high overpressures likely persist to the Present and are a critical precondition for submarine slope failure.     

Top-down and bottom-up modelling to support low-carbon scenarios: climate policy implications

Bottom-up and top-down models are used to support climate policies, to identify the options required to meet GHG abatement targets and to evaluate their economic impact. Some studies have shown that the GHG mitigation options provided by economic top-down and technological bottom-up models tend to vary. One reason for this is that these models tend to use different baseline scenarios. The bottom-up TIMES_PT and the top-down computable general equilibrium GEM-E3_PT models are examined using a common baseline scenario to calibrate them, and the extend of their different mitigation options and its relevant to domestic policy making are assessed. Three low-carbon scenarios for Portugal until 2050 are generated, each with different GHG reduction targets. Both models suggest close mitigation options and locate the largest mitigation potential to energy supply. However, the models suggest different mitigation options for the end-use sectors: GEM-E3_PT focuses more on energy efficiency, while TIMES_PT relies on decrease carbon intensity due to a shift to electricity. Although a common baseline scenario cannot be ignored, the models’ inherent characteristics are the main factor for the different outcomes, thereby highlighting different mitigation options.

Policy relevance

The relevance of modelling tools used to support the design of domestic climate policies is assessed by evaluating the mitigation options suggested by a bottom-up and a top-down model. The different outcomes of each model are significant for climate policy design since each suggest different mitigation options like end-use energy efficiency and the promotion of low-carbon technologies. Policy makers should carefully select the modelling tool used to support their policies. The specific modelling structures of each model make them more appropriate to address certain policy questions than others. Using both modelling approaches for policy support can therefore bring added value and result in more robust climate policy design. Although the results are specific for Portugal, the insights provided by the analysis of both models can be extended to, and used in the climate policy decisions of, other countries.     

Earthquake shaking probabilities for communities on Vancouver Island,British Columbia,Canada

Comprehensive risk assessments are fundamental to effective emergency management. These assessments need to identify the range of hazards (or perils) an entity is exposed to and quantify the specific threats associated with each of those hazards. While hazard identification is commonly, if not formally, conducted in most circumstances, specific threat analysis is often overlooked for a variety of reasons, one of which is poor communication with subject matter experts. This poor communication is often attributable to an adherence to scientific jargon and missed opportunities to simplify information. In Canada, for example, earthquake hazard calculations have been readily available to engineers and scientists for decades. This hazard information, however, is expressed in terms of peak ground accelerations (PGA) or spectral accelerations (SA) that are foreign concepts to most emergency managers, community decision-makers and the public-at-large. There is, therefore, a need to more clearly, simply and effectively express seismic hazard information to the non-scientific community. This paper provides crustal, sub-crustal and subduction interface earthquake shaking probabilities, expressed as simple percentages for each of 57 locations across Vancouver Island, British Columbia, Canada. Calculations present the likelihood of earthquake shaking on Vancouver Island as the probabilities of exceeding each of three shaking intensity thresholds (“widely felt”; onset of “non-structurally damaging” shaking; and onset of “structurally damaging” shaking) over four timeframes (10, 25, 50 and 100 years). Results are based on the latest Geological Survey of Canada hazard models used for the 2010 national building code and are presented in both tabular and graphic formats. This simplified earthquake hazard information is offered to aid local residents, organizations and governments in understanding and assessing their risk and to encourage and facilitate sound earthquake preparedness funding decisions.     

Using DORIS measurements for modeling the vertical total electron content of the Earth’s ionosphere

The Doppler orbitography and radiopositioning integrated by satellite (DORIS) system was originally developed for precise orbit determination of low Earth orbiting (LEO) satellites. Beyond that, it is highly qualified for modeling the distribution of electrons within the Earth’s ionosphere. It measures with two frequencies in L-band with a relative frequency ratio close to 5. Since the terrestrial ground beacons are distributed quite homogeneously and several LEOs are equipped with modern receivers, a good applicability for global vertical total electron content (VTEC) modeling can be expected. This paper investigates the capability of DORIS dual-frequency phase observations for deriving VTEC and the contribution of these data to global VTEC modeling. The DORIS preprocessing is performed similar to commonly used global navigation satellite systems (GNSS) preprocessing. However, the absolute DORIS VTEC level is taken from global ionospheric maps (GIM) provided by the International GNSS Service (IGS) as the DORIS data contain no absolute information. DORIS-derived VTEC values show good consistency with IGS GIMs with a RMS between 2 and 3 total electron content units (TECU) depending on solar activity which can be reduced to less than 2 TECU when using only observations with elevation angles higher than \(50^\circ \) . The combination of DORIS VTEC with data from other space-geodetic measurement techniques improves the accuracy of global VTEC models significantly. If DORIS VTEC data is used to update IGS GIMs, an improvement of up to 12  % can be achieved. The accuracy directly beneath the DORIS satellites’ ground-tracks ranges between 1.5 and 3.5 TECU assuming a precision of 2.5 TECU for altimeter-derived VTEC values which have been used for validation purposes.     

Responses of tidal creek macrobenthic communities to the effects of watershed development

This study examined the effects of watershed development on macrobenthic communities in tidal creeks of Charleston Harbor, South Carolina, U.S. Two types of creeks were evaluated: upland creeks which drained watersheds consisting of at least 15% terrestrial land cover, and salt marsh creeks which drained no upland habitat (i.e., only intertidal habitat). Samples of macrobenthic organisms were taken along the longitudinal axis of twenty-three primary (first order) tidal creeks. Water and sediment quality data were also collected including measurements of dissolved oxygen, salinity, temperature, sediment characteristics, and toxic chemicals in the creek sediments. Hypoxic conditions occurred more than 15% of the time in both reference and developed creeks and were a natural attribute of these systems. The most severe and frequent hypoxia occurred in impacted salt marsh creeks. Salinity fluctuations were the greatest in developed upland creeks and salinity range was identified as a potentially reliable indicator of the degree to which watershed development has altered hydrodynamic processes. The creeks draining urban and industrial watersheds were degraded environments characterized by watersheds with high (>50%) levels of impervious surface, broad fluctuations in salinity, severe hypoxia, and potentially toxic levels of chemicals in the sediment. These creeks had low macrobenthic diversity and abundance and were numerically dominated by the oligochaeteMonopylephorus rubroniveus in mud sediments, and the polychaeteLaeoreis culveri in sand sediments. Suburban watersheds had 15–35% impervious surface and creeks draining them were exposed to frequent hypoxia and broad salinity fluctuations. The levels of chemical contaminants in sediments of suburban and impacted salt marsh creeks were generally not different from the levels in reference creeks. Macrobenthic diversity and abundance were higher for suburban and impacted salt marsh creeks than for urban and industrial creeks. However, suburban and salt marsh impacted creeks were numerically dominated by a few pollution indicative species including the oligochaetesM. rubroniveus andTubificoides brownae and the polychaeteL. culveri. These creeks appear to be exhibiting early signs of degradation (e.g., a simplified food web). Two promising community-level macrobenthic metrics for assessing environmental quality were identified: the proportional abundance of pollution indicative taxa, and the proportional abundance of pollution sensitive taxa. These indicators were significantly (p<0.05) correlated with the salinity range, the level of chemical contaminants in sediments, and amount of impervious surface in the watershed.     

Metals in eggs and hatchlings of Dermochelys coriacea (testudines) in Espírito Santo,Brazil and their relation to hatching and emergence success

Certain concentration of metal may influence survival in embryonic stages, reducing the birthrate and hatching emergence. This study aimed to evaluate concentration of metal in eggs and hatchlings of Dermochelys coriacea and correlate metal concentrations in eggs with hatching and emergence success. The samples were collected at Biological Reserve Station, ES, Brazil. At the nests' opening, unhatched eggs and stillborn hatchlings were collected to survey the successful hatching and emergence of D. coriacea. The eggs shell, egg content, and dead hatchlings metal concentrations were compared to hatching and emergence success. A positive correlation was found between the concentration of copper (Cu) in the hatchlings and the success of the emergence (r² = .28, p < .05), and a moderate positive correlation between the concentrations of iron (Fe) and barium (Ba; r² = .44, p < .05) and success hatching. The concentrations of metals in eggs and hatchlings of D. coriacea in the Espírito Santo are below the levels that could be considered harmful to the species. In summary, there is a positive correlation between metals levels and hatching and emergence success.