对青藏东北缘现今块体划分、运动及变形的初步研究

利用2维非连续变形分析方法（DDA），以位移代替围压作为边界约束力，研究青藏东北缘现今块体划分及其运动变形。根据该地区地质构造及地震活动，以GPS点测量位移作为模拟结果约束点，得出了较合理的块体划分模型和随时间演化的主应变分布图，并把应变高值区与近几年来发生的5级以上地震作对比，得出了研究区内地震危险性可能较大的区域。另外，对模拟的甘青块体与阿拉善块体的边缘带断裂左旋运动做了大概计算。     

青藏块体东北缘断层形变与中强地震

对祁连山－海原断裂带近期断层形变特征进行了初步研究，发现多场地，大范围的断层活动异常是中等强度地震发生的显著背景，并且往往与大陆地震活动的阶段性总体状况相呼应；区域形变存在明显的特征量，包括特征形态和特征时间，同一场地在不同地震前的异常特征具有重复性，但会受到背景差异显著的不同地震的影响，目前形变状况表明研究区仍具有发生中强地震的地壳运动背景。     

定水头注水引起的含水层水平运动和应变

基于含水层固体颗粒与孔隙水不可压缩的假设 ,本文导出了单井注水情况下泰斯承压含水层水平运动速度与水头之间的基本关系式。然后利用注水井壁处的应力、应变边界条件 ,进一步导出了单井定水头注水引起的泰斯承压含水层水平运动速度、位移和应变解析表达式。该水平位移与应变由两部分组成 :一部分为由注水压力本身引起的经典弹性力学解项 ,它仅随半径而变化 ,与注水时间无关 ;另一部分为由地下水头变化引起的水动力学位移和应变解项。其中 ,含水层水动力学水平位移随时间加长呈指数增长特征 ,水动力学径向应变则表现为近井处拉张、远井处挤压的分区特征 ,且近井拉张区随时间加长逐渐向外扩展。单井注水含水层水动力学水平位移、应变解的导出 ,完善和发展了单孔内压经典弹性平面力学问题解     

Time-dependent photoionization opacities in dense gamma-ray burst environments

The recent detection of a transient absorption feature in the X-ray prompt emission of GRB 990705 showed the importance of such observations in the understanding of gamma-ray bursts and their progenitors. We investigate the time dependence of photoionization edges during the prompt emission of bursts in different environments. We show that their variability can be used to infer the density and geometry of the surrounding medium, giving important clues to unveil the nature of the burst progenitor.     

介质横向不均匀对震后地表位移场的影响

利用三维有限元模拟两层地球模型(包括弹性层和粘弹性层)介质的横向不均匀和断层错动的复杂性对震后地表位移场的影响，其数值结果包括弹性解和粘弹性解。结果表明，震后位移场的分布特征不仅与粘弹性层的流变特性有关，还与弹性层介质的剪切模量以及断层的同震错动有关。     

OH incorporation in nearly pure MgAl2O4 natural and synthetic spinels

Four nearly pure MgAl₂O₄ spinels, of both natural and synthetic occurrence, have been studied by means of X-ray single crystal diffraction and FTIR spectroscopy in order to detect their potential OH content. Absorption bands that can be assigned to OH incorporated in the spinel structure were only observed in spectra of a non-stoichiometric synthetic sample. The absorption intensity of two bands occurring at 3350 and 3548 cm⁻¹ indicate an OH content of 90 ppm H₂O. Based on correlations of OH vibrational frequencies and O-H?O distances, the observed absorption bands correspond to O-H?O distances of 2.77 and 2.99 Å, respectively, which is close to the values obtained by the structure refinements for ^VIO-O_unsh (2.825 Å) and ^IVO-O (3.001 Å). This indicates that one probable local position for hydrogen incorporation is the oxygens coordinating a vacant tetrahedral site. The present spectra demonstrate that the detection limit for OH in Fe-free spinels is in the range 10-20 ppm H₂O. However, at appreciable Fe²⁺ levels, the detection of OH bands becomes hampered due to overlap with strong absorption bands caused by electronic d-d transitions in Fe²⁺ in the tetrahedral position.     

Some chemical characteristics of the brines in Bannock and Tyro Basins: salinity, sulphur compounds, Ca, F, pH, At, PO4, SiO2, NH3

Results of the chemical investigation on the Bannock and Tyro Basins are reported.Both basins were found to be hypersaline ( 10 times higher than salinity of normal seawater) and anoxic. In all investigated basins a region of transition, a few meters thick, was identified at depths > 3327 dbar. It is characterized by a sharp gradient of salinity, and all concentrations of analysed species increase strongly except for dissolved oxygen and nitrate, which immediately drop to zero. This region appears as a sharp boundary that prevents mixing. As a result, in the presence of organic matter, an anoxic condition developed with the complete depletion of dissolved oxygen. At the same time, hydrogen sulphide and ammonium accumulated within the brine. Between the Bannock and the Tyro brines differences occur in the measured concentrations of H₂S, SO²⁻₄, Ca²⁺ and NH₃. There are some differences also within the Bannock area sub-basins.The Libeccio sub-basin, in the Bannock area, contains a double-layered brine: the upper layer is 140 dbar thick and the lower layer is 300 dbar thick. A second interface between upper and lower brines develops at a depth of 3500 dbar. Nearly all of the measured concentrations vs. depth show the double layer, with the exception of ammonium, the concentration of which remains nearly constant throughout the anoxic column. Profiles of the other species analyzed show remarkable differences on passing from the upper to the lower brine. Hydrogen sulphide, sulphate and fluoride concentrations appear constant and then increase at the second interface. The calcium concentration is also constant in the upper brine, but decreases at the second interface. Total alkalinity and phosphate concentrations show a maximum peak just below the first interface. However, after passing through the second interface all the chemical parameters exhibit an almost constant behaviour down to the bottom.Hypersaline conditions are attributed to the dissolution of Messinian evaporite, and anoxia is suggested to originate from the oxidation of organic matter present in sediments and from the absence of bottom water circulation in such a deep and enclosed environment.The chemical conditions can be summarized as follows: in the Libeccio Basin the values for the species analysed have the ranges: 39–321 psu for ‘salinity’, 8.2−6.5 for pH, 2.7–4.0 mM for total alkalinity, 0.2-0 mM for dissolved oxygen, 0–1669 μM for hydrogen sulphide, 0–198 μM for thiol, 31–99 mM for sulphate, 11–21 mM for calcium, 7–100 μM for fluoride, 0.2–3080 μM for ammonium, 5.8-0 μM for nitrite, 0.2–12 μM for phosphate and 8–130 μM for silicate.     

Quantitative basin characterisation to refine debris-flow triggering criteria and processes: an example from the Italian Western Alps

This paper investigates rapid channelized debris flow related to rainfalls in small alpine basins. Its goal is to evaluate and correlate different geological and technical aspects with predisposing and triggering factors that can control these phenomena. The study area is the upper part of the Susa Valley where 12 small basins were selected. For each of them, lithological, geomorphological, climatic and technical information were mapped and analysed. Debris-flow triggering conditions, flow and depositional processes were related to physical characteristics of the basin that can be easily measured and quantified. At least three different groups of basins were found: G1) basins with one event each 4–6 years, characterised by massive or blocky calcareous rocks, G2) basins with more than one event per year that show an abundance of layered or sheared fine-grained rocks and G3) basins with recurrence levels exceeding 10 years, activated only by heavy and prolonged rainfalls, marked by massive or blocky coarse-grained igneous rocks. Furthermore, important morphometric differences were found. These considerations are useful in terms of hazard zonation and risk mitigation.     

Coronal environment of quiescent prominences

With thespectro-coronagraph and themultichannel subtractive double pass spectrograph (MSDP) at the Pic du Midi Observatory two quiescent prominences were observed simultaneously. From the spectro-coronagraph observations 2D maps of Hei 10830 , Fexiii 10798 and 10747 line intensities were obtained. In addition, we obtained 2D maps of the ratioR of the two iron lines. This ratio is used as a diagnostic for determining the density of the hot coronal plasma surrounding prominences. We found that the electron density is higher at the location of the prominences than in the corona, whereas small regions (40) of lower electron density are unevenly distributed around the prominences indicating that the surrounding corona is highly inhomogeneous. The density of the cavity is reduced by a factor 1.5 compared to the density of the prominence environment (5 × 10⁸ cm^–3). We discuss the existence of cavities around these prominences according to the orientation of their axes relative to the line of sight and according to the velocity field inside the prominences. Constraints on models for prominence formation are derived.     

Permanent Scatterers for landslide investigations: outcomes from the ESA-SLAM project

Within the SLAM project (Service for Landslide Monitoring), launched in 2003 by the European Space Agency (ESA) the Permanent Scatterers (PS) technique, a multi-image interferometric approach, coupled with the interpretation of aerial-photos and optical satellite images, was carried out for landslide investigations. The PS analysis was applied at a regional scale as support for landslide inventory mapping and at local scale for the monitoring of single well-known slope movements. For the integration of the PS measurements within a landslide inventory the Arno river basin (Italy) was chosen as test site for the presence of a high number of mass movements (to date about 300 areas at high landslide risk and more than 27,000 individual landslides mapped by the institutional authorities). About 350 SAR images have been interferometrically processed by means of the PS technique, with the detection of about 600,000 PS. The use of optical images contributed spatial meaning to the point-wise information provided by the PS, making it easier to identify terrain features related to slope instability and the landslide boundaries. Here we describe the employed methodology and its impact in the updating of a preexisting landslide inventory. 6.8% of the total number of landslides were characterized by ground displacement measurements from the PS: 6.1% of already mapped landslides and 0.8% of new unstable areas detected through the PS analysis. Moreover, most of the PS are located in urban areas, showing that the proposed methodology is suitable for landslide mapping in areas with a quite high density of urbanization, but that over vegetated areas it still suffers from the limitations induced by the current space-borne SAR missions (e.g. temporal de-correlation). On the other hand, the use of InSAR for the monitoring of single slow landslides threatening built-up areas has provided satisfactory results, allowing the measurement of superficial deformations with high accuracy on the landslide sectors characterized by a good radar reflectivity and coherence.