Surface drag and turbulence over an inhomogeneous land surface

Data collected over an inhomogeneous semi-rural area are presented. The data are compared with previous surface-layer data to determine how representative the fixed-point flux measurements are of area averages. Departures from the standard surface-layer results are found to be relatively small (~10–20%), which supports the concept of a blending height above which the flow ceases to respond to variations in the underlying surface and becomes horizontally homogeneous.Effective roughness lengths are derived for different wind directions and the relationship between the effective roughness length and upwind surface is examined in the light of recent ideas on averaging surface roughness lengths. It is found that by averaging drag coefficients, realistic values of the effective roughness length can be calculated which are not very sensitive to the precise choice of the component roughness lengths.     

Modification of an acoustic pinger to transmit temperature data

An acoustic pinger can be modified to transmit two pings per second with the delay time between pings controlled by the temperature of an external thermistor. The precision of the temperature measurements is on the order of 0.1°C. This modification does not interfere with the normal depth indicating function of the pinger and is an inexpensive means of obtaining water temperature data.     

Modern swathe sounding and sub-bottom profiling technology for research applications: The Atlas Hydrosweep and Parasound Systems

This chapter describes two separate but complementary research echosounder systems originally developed by Krupp Atlas Elektronik GmbH for the new German oceanographic research vessel Meteor.The Hydrosweep is a Hydrographic wide-swathe sweep survey echosounder for both shallow and deep water applications providing accurate bathymetric surveys and terrain-following navigation capabilities.The Parasound system is a hull-mounted dual channel parametric narrow-beam deep sea survey and sub-bottom profiling echosounder enabling particularly high vertical and horizontal resolution of seabed features.     

Spatial variation of the intertidal sediments and macrozoo-benthic assemblages along Eighty-mile Beach, North-western Australia

The extensive intertidal flats along Eighty-mile Beach in North-western Australia appear to be monotonous and homogeneous and seem ideally suited to study tidal zonation in macrozoo-benthic communities and their possible correlates with characteristics of the sediment. In October 1999, we sampled benthic invertebrates and sediments at a total of 895 sampling stations distributed over six different locations, each location separated by 15 km of unsampled foreshore along Eighty-mile Beach. To test for the presence or absence of patterns of tidal zonation (distinct height-related zones of specific sediment grain sizes or zoobenthic taxonomic groups) or patchiness (distinct patches of specific sediment grain sizes or zoobenthic taxonomic groups not related to tidal height) each location was divided into three along-shore sections and each section (transect) was examined at two or three tidal heights. Zonation was observed for sediment grain sizes. Sediments were coarser at the highest intertidal level and finer towards the low water line. Benthic assemblages also differed among tidal heights, but in terms of species-composition the differences were not consistent among the locations. Each location supported a unique collection of benthic invertebrates. Therefore the hypothesis of the presence of distinct zones of specific species or zoobenthic taxonomic groups was rejected; the presence of benthic patches was confirmed. The distribution of sediments and the composition of benthic assemblages were surprisingly poorly correlated compared to those reported in 12 previous quantitative studies around the world. One possible explanation might be that super-cyclone Vance, which hit the study-area only six months before this study, contributed to this poor correlation. Alternatively, the poor correlation may indicate that biotic interactions are more important than the assumed abiotic structuring.     

Can turbidity caused by Corophium volutator (Pallas) activity be used to assess sediment toxicity rapidly?

The standard toxicity test organism, Corophium volutator, exhibits a behavioural response to contaminated sediments that causes increased turbidity of overlying water. We quantify the effects of this response to an estuarine sediment spiked with copper and hydrocarbon contaminated sediments from an oil installation in the North Sea. Turbidity measured 24 h after the start of a toxicity test shows a strong relationship with contaminant concentrations and with mortality after 10 days. Turbidity measurements can therefore give a rapid indication of sediment toxicity, permitting a reduction in storage time of sediments to be used in dilution series and toxicity identification evaluation (TIE) tests, reducing the likelihood of contaminants degrading prior to testing.     

The Southern Antarctic Circumpolar Current Front: physical and biological coupling at South Georgia

The coupling of physics and biology was examined along a 160 km long transect running out from the north coast of South Georgia Island and crossing the Southern Antarctic Circumpolar Current Front (SACCF) during late December 2000. Surface and near surface potential TS properties indicated the presence of three water types: a near-shore group of stations characterised by water which became progressively warmer and fresher closer to South Georgia, an offshore grouping in which sea surface temperatures and those at the winter water level were relatively warm (1.8°C and 0.5°C, respectively), and a third in which surface and winter water temperatures were cooler and reflected the presence of the SACCF. The transect bisected the SACCF twice, revealing that it was flowing in opposite directions, north-westward closest to South Georgia and south-eastwards at its furthest point from the island. The innermost limb was a narrow intense feature located just off the shelf break in 2000–3500 m of water and in which rapid surface baroclinic velocities (up to 35 cm s⁻¹) were encountered. Offshore in the outermost limb, shown subsequently to be a mesoscale eddy that had meandered south from the retroflected limb of the SACCF, flow was broader and slower with peak velocities around 20 cm s⁻¹. Chlorophyll a biomass was generally low (<1 mg m⁻³) over much of the transect but increased dramatically in the region of the innermost limb of the SACCF, where a deepening of the surface mixed layer was coincident with a subsurface chlorophyll maximum (7.4 mg m⁻³) and elevated concentrations down to 100 m. The bloom was coincident with depleted nutrient concentrations, particularly silicate, nitrate and phosphate, and although ammonium concentrations were locally depleted the bloom lay within an elevated band (up to 1.5 mmol m⁻³) associated with the frontal jet. Increased zooplankton abundance, higher copepod body carbon mass and egg production rates all showed a strong spatial integrity with the front. The population structure of the copepods Calanoides acutus and Rhincalanus gigas at stations within the front suggested that rather than simply resulting from entrainment and concentration within the jet, increased copepod abundance was the result of development in situ. Estimates of bloom duration, based on silicate and carbon budget calculations, set the likely duration between 82 and 122 d, a figure supported by the development schedule of the two copepod species. Given this timescale, model outputs from FRAM and OCCAM indicated that particles that occurred on the north side of South Georgia in December would have been in the central-southern Scotia Sea 2–3 months earlier, probably in sea ice affected regions.     

Macrofaunal Spatial Patterns in Relationship to Environmental Variables in the Richibucto Estuary,New Brunswick,Canada

Estuarine macrobenthos respond to a variety of environmental gradients such as sediment type and salinity, and organic enrichment. A relatively new influence, organic loading from suspended bivalve culture, has the potential to alter this response. A study on soft-bottom macrobenthic communities was carried out in the Richibucto estuary (46°40′N, 64°50′W), New Brunswick, Canada, with samples collected from 18 stations in late September and early October 2006. The site consisted of a large tidal channel originating upstream in a small river. The channel was punctuated by bag culture of oysters along its length. A total of 88 species were recorded. The mean values of abundance, species richness, and diversity (H′) of macrofauna were 11,199 ind. m⁻² (ranged from 4,371 to 19,930 ind. m⁻²), 23.4 species grab⁻¹ and 3.29 grab⁻¹, respectively. In general species richness and H′ increased from the upper estuary to the estuarine mouth. Multivariate analyses clearly exhibited the spatial distribution in community structure, which coincided with the locations along the estuary (the upper, the lower and the mouth), as well as inside and outside the channel. Species richness and diversity H′ showed strong positive correlations with salinity (21.2–25.2 ppt), and abundance was positively correlated with water depth (1.0–4.5 m). Abundance and species richness were negatively correlated with both of silt–clay fraction (3.3–24.8%) and sorting (σ_I). Species richness was also negatively correlated with organic content (1.9–12.7%). The BIO-ENV analyses identified silt–clay fraction, σ_I and salinity as the major environmental variable combination influencing the macrofaunal patterns, and silt–clay fraction as the single best-correlated variable.     

Shape and distribution analysis of Merensky Reef potholing, Northam Platinum Mine, western Bushveld Complex: implications for pothole formation and growth

Syn-magmatic removal of the cumulate pile during the formation of the Bushveld Complex resulted in “potholes”. Erosion progressed downward in the cumulate pile, resulting in a series of steep, transgressive contacts between locally conformable potholed reefs in the regional pothole sub-facies of the Swartklip Facies in the western limb of the Bushveld Complex. The deepest of these potholes, “third-order” or “FWP2” potholing, occurs where the base of the Merensky Cyclic Unit transgresses the Upper Pseudo-Reef Chromitite marker horizon. The base of a FWP2 pothole on Northam Platinum Mine consists of an unconformable stringer Merensky Chromitite overlain by a medium-grained, poikilitic orthopyroxenite and underlain by either a pegmatitic harzburgite or the medium-grained Lower Pseudo-Reef Anorthosite. Detailed shape and distribution analysis of FWP2 potholes reveals underlying patterns in their shape and distribution which, in turn, suggest a structural control. The ratio between pothole short vs long axes is 0.624 (N=1,385), although the ratio increases from 0.48 to 0.61 in the long axis range 10 to 60 m, then decreases from 0.61 to 0.57 from 61 to 100 m, increasing again from 0.57 to 0.61 from 101 to 400 m, suggesting that there is not a simple relationship between pothole shape and size. Shape (circularity, eccentricity, and dendricity) analysis of a subset of 638 potholes indicates that potholes with long axes <100 m have an elliptical, average normalized shape, elongate on a 120–150° orientation. Potholes with long axis lengths >100 m have an average normalized shape that is bilobate and elongate on a 120° orientation. The average aspect ratio (short axis length divided by long axis length) of potholes is highest for potholes with long axis lengths >100 m and lowest for potholes with long axis lengths between 35 and 60 m. The most common long axis orientation for potholes with long axis lengths <100 m is 150° but 120° for long axis lengths >100 m. Fractal analysis indicates that the distribution of pothole centers is controlled neither by a single nor several interacting fractal dimensions. Autocorrelation (Fry) analysis of the distribution of pothole centers shows recurring pothole distribution trends at 038, 070, and 110° for potholes over the full range of long axis lengths, while the trends of 008 and 152° occur in potholes with long axes lengths between 60 and 100 m. Chi-squared (X ²) analysis of the locations of pothole centers suggests that the distribution of small potholes is highly non-uniform but becomes exponentially more uniform with increasing pothole size. The model which best fits the observed shape and distribution analysis is a combination of protracted independent growth and “nearest neighbor” merging along specific orientations. For instance, the clustered distribution of original pothole centers resulted in merged potholes with long axes lengths of up to 60 m, exhibiting short vs long axes ratios of 0.61, preferred orientations of 150°, and alignment along 010 and 150° trends. Further independent growth allowed for merging of similar-sized (and smaller) neighboring potholes, generating potholes with long axes of up to 100 m in length, a preferred long axis orientation of 150°, and alignment along 010, 040, 075, and 150°. Subsequent preferential merging occurred along a 120° trend, thereby preserving a bilobate form. This implies that while pothole initiation and enlargement may be driven by a “top-down” (i.e., possibly thermomechanical) process, an underlying linear or structural catalyst/control is revealed in changes in pothole shape during enlargement and, furthermore, in the preferred trends along which potholes merged over a considerable period, possibly concomitant with adjustment of major structures in the footwall to the Bushveld Complex and pulses into the magma chamber.